Audited Supplier
8232401
Customized
3 Years
Rubber Metal Sleeve Bushing
Customized
Hydraulic
Coil Spring
Steel
Single Cylinder
Customized
Customized
35-80 Shore a
55-70 Shore a
500 N -30000 N
up to 60 °c, Transient up to +80 °c
up to –45 °c
YXD
OPP Bag
customized
China
4002119000
Product Description
Rubber Conical Anti-Vibration bushing engine Mount 
Material
| Standard material | Hardness |
| Natural rubber NR 11 | 35,45,55,62,68 Shore A |
Operating conditions
| Compressive forces in Z direction | 1100 N …4200 N | Maximum permissible force |
| Max.temperature | +60°ºC,transient +80 ºC | |
| Min.temperature | -45 ºC |
Product description
Hydro bushes are elastomer springs with integrated hydraulic damping.
Frequency & amplitude
selective damping
Integrated limitation of the spring
displacement
Allowing twist in all directions
Easily installed
RoHS-compliant.
| Product Name | CONICAL MOUNT / INDUSTRIAL ENGINE MOUNTS |
| Material | NR, NBR, SBR, CR, EPDM, Silicone, FKM/VITON, HNBR, etc. Q355D,Q355B, 45#,20# |
| Hardness | 20-85 Shore A |
| Temperature | -40°C to +300°C |
| Size | According to the drawing or sample |
| Color | According to your requirement (Panton or RAL color card) |
| Application | Automotive, industrial, machinery, electrical, medical, household etc |
| Performance | Good sealing & damping;Waterproof;Aging/ozone/oil/pressure resistance;Low & high temperature resistance |
| Mode of Production | Compression, injection, injection transfer, extrusion, silicone liquid injection |
| Production Capabilities | Machines including 150T,200T,250T, 300T and 500T |
| Testing instruments | Vulcanization tester, tensile tester, rubber durometer, insulation resistance tester etc |
| Certificate | ISO9001:2016 IATF16949:2016 |
| Rubber Compound | Can be FDA, RoHs or REACH approved, and free test slabs and hardness testers can be offered for customer's testing |
| Package | Inner plastic bag/outside carton/wooden pallets/ or any other special package as per customer's requirements. |
| Notes | Models and logos can be customized as your requirements; Designs and specifications are accepted. |
Suitable for mountings of combustion engines, cabs, pumps and compressors, mainly in agricultural machines and construction machinery.
They are specifically suited when low frequencies occur as excitation frequency in the mount system. They achieve a high damping in the natural frequency range of the system as well as gut isolation properties above this range.
Vibrations in the mount system which have a sound-conducting or radiating characteristic, generated primarily through excitation amplitudes or dynamic forces in the audible frequency range are significantly reduced.
The integrated hydraulic mechanism in the bush with the frequency and amplitude dependent damping is designed for effect in the Z direction. By matching the damping maximum of the hydro bush to the critical frequency (resonance frequency) of the spring-supported mass, the resonance magnification can be noticeably reduced. For higher frequencies, the insulating capability of elastomer bond components can be utilised.
The hydro bushes are designed so that the translatory stiffness increase in the order X,Z,Y. The bushes aredesigned for the primary load in the radial (Z direction) as well as the axial direction (X direction) but can also absorb slight cardanic and torsional deformations. Depending on the design, limiters for deflection (labelled as HD) with or without reinforcement can be integrated in the Z direction.
Vibrations in the mount system which have a sound-conducting or radiating characteristic, generated primarily through excitation amplitudes or dynamic forces in the audible frequency range are significantly reduced.
The integrated hydraulic mechanism in the bush with the frequency and amplitude dependent damping is designed for effect in the Z direction. By matching the damping maximum of the hydro bush to the critical frequency (resonance frequency) of the spring-supported mass, the resonance magnification can be noticeably reduced. For higher frequencies, the insulating capability of elastomer bond components can be utilised.
The hydro bushes are designed so that the translatory stiffness increase in the order X,Z,Y. The bushes aredesigned for the primary load in the radial (Z direction) as well as the axial direction (X direction) but can also absorb slight cardanic and torsional deformations. Depending on the design, limiters for deflection (labelled as HD) with or without reinforcement can be integrated in the Z direction.
Fitting & installation
Design notes
The mount configuration comprises an elastomer-metal composite with loadbearing element in Vee-shape, stops, fluid chambers and overflow ducts. The composite is mounted in an outer sleeve
and fluid-filled.
Fitting & installation
Hydro bushes have an outside fit and accommodate a threaded fastener on the inside for installation
Hydro bushes can be secured with Loctite or other, similar adhesive if a press fit is not desired
Individual components permit slight adjustment to allow for in-situ offset Always install hydro bushes centred and at right angles to the axis of primary radial load and if possible, utilise the entire cylindrical surface area of the outer sleeve as the bearing surface If possible, utilise the entire cylindrical length of the inner sleeve bore as the bearing surface
Position the bush relative to the weight load in such a way as to reduce the largest distance between the axis of the inner sleeve to the axis of the outer sleeve in the place through both axes.
Position the bush relative to the weight load in such a way as to reduce the largest distance between the axis of the inner sleeve to the axis of the outer sleeve in the place through both axes.
| Nominal values of the maximum amounts | Stiffness | Inside 0. | Product No. | Material | Type | Article No. | ||||||
| Radial | Axial | Radial | Radial | |||||||||
| Fzmay | Sz max | Cx | Cy | Cz | d | Tol. | ||||||
| Sz=0mm | Sz=5mm | S2=0mm | Sz=5mm | |||||||||
| [N] | [mm] | [N/mm] | [N/mm] | [N/mm] | [N/mm] | [N/mm] | [mm] | |||||
| 1100 | 5 | 95 | 110 | 255 | 300 | 220 | 25 | H9 | 04618013 | 35 NR 11 | 95573 | |
| 1100 | 5 | 95 | 110 | 255 | 300 | 220 | 32 | H9 | 04618711 | 35 NR 11 | 49022801 | |
| 1100 | 5 | 95 | 110 | 255 | 300 | 220 | 32 | H9 | 04618712 | 35 NR1 | HD | 49022862 |
| 1600 | 5 | 190 | 220 | 500 | 600 | 320 | 25 | H9 | 04618014 | 45 NR1 | 595574 | |
| 1600 | 5 | 190 | 220 | 500 | 600 | 320 | 32 | H9 | 04618708 | 45 NR 11 | 507315 | |
| 1600 | 5 | 190 | 220 | 500 | 600 | 320 | 32 | H9 | 04618713 | 45 NR 11 | HD | 49022863 |
| 2500 | 5 | 280 | 330 | 750 | 830 | 500 | 25 | H9 | 04618015 | 55 NR1 | 595575 | |
| 2500 | 5 | 280 | 330 | 750 | 830 | 500 | 32 | H9 | 04618714 | 55 NR 11 | 49022864 | |
| 2500 | 5 | 280 | 330 | 750 | 830 | 500 | 32 | H9 | 04618705 | 55 NR 11 | HD | 477895 |
| 3450 | 5 | 360 | 425 | 960 | 1070 | 685 | 32 | H9 | 04618016 | 62 NR 11 | 595576 | |
| 3450 | 5 | 360 | 425 | 960 | 1070 | 685 | 32 | H9 | 04618715 | 62 NR 11 | HD | 49022865 |
| 4200 | 5 | 440 | 520 | 1170 | 1300 | 840 | 32 | H9 | 04618017 | 68 NR 11 | 95676 | |
| 4200 | 5 | 440 | 520 | 1170 | 1300 | 840 | 32 | H9 | 04618702 | 68 NR 11 | HD | 600984 |
30+ years production experiences
- Who we are
1 hour to the Qingdao PORT
40 min to the QINGDAO AIRPROT
16949 -IATF International certification
28 production lines
15000² Prodcution areas
200 Employees
20 professional technician R&D dept
5,000,000 pieces monthly production capabilities
45 countries exported to globally
35 Years' production experiences for rubber and metal products
ISO 9001:2016 IATF16949:2016
FAQ
Q1:Are you a manufacturer or a trading company?
A: We are manufacturer. We can control quality and delivery better.
Q2: Can I bargin the price?
A:Yes. The price we send you is for your reference. We will offer you the final price according to your drawing specification and purchasing quantity.
Q3: What kind package you provice?
A: Cartons, pallets and customer requirements.
Q4: Can I get free sample?
A:Yes. The sample is free
Q5: When will you finish my order?
A: In general 1- 15days, after receiving the deposit .
Q6: May I visit your factory?
A: Yes. Welcome to visit us.
If there is any interests, please feel free to contact us and send us INQUIRY!
