Audited Supplier
Wall saw cutting machine is mainly used for cutting or slitting of reinforced concrete
wall, brick wall or stone, building or old building renovation, reinforcement, change
design, It can cut large-area wall such as door hole, window or elevator hole.
Wall cutting machine is mainly used for cutting or slitting of reinforced concrete wall,
brick wall or stone, building or old building renovation, reinforcement, change design,
It can cut large-area wall such as door hole, windows. The structure is non-destructive
and can be molded in one time. In addition to avoiding the damage to the structure of
this building caused by traditional knocking construction, it also saves time, material,
manpower and expenses.
This wall cutting saw machine use heavy-duty, double-insulated, high-power motor and
reducer, which has low failure rate, long service life and saves maintenance costs. it is
special mechanical clutch protection device to prevent damage to the personnel due to
misoperation. The control device with manual or automatic cutting can not only improve
construction quality, but also speed up the construction speed, and also greatly reduce
the labor intensity of the operator.
Application of the machine:
1. general reinforced concrete walls, board cutting, demolition or the door hole.
2. cutting surface required to be a smooth, straight, beautiful concrete cutting.
3. cutting depth according to the blade size adjustment, the current use
4. 1600 mm blade which Maximum cutting depth up to 600mm.
The whole set of machine inculdes:
1. one frame with an electric motor, 220V, 50Hz, 6580w.
(We could customize the motor according to your requirement.)
2. one disk, 800-1000mm or customized.
3. one saw cover.
4. one set of rails, 1.2m*2 pcs.
5. one set of anchors
Simple Operation instructions:
1. fix the rails on the wall with anchors.
2. put the frame in the rails.
3. fix the disc and saw cover.
4. power on, then move the handle to cut.
(Middle handle is for disc in/out, side handle is for machine movement.)
Warranty of wall saw machine:
1. one year.
2. life time free technical support.
Technical parameter
Model | YG-800 | YG-1000 | YG-1200 |
Voltage | 220v | 220v | 220v |
Power | 6200w | 6580w | 6980w |
Max. Cutting depth | 320mm | 400mm | 500mm |
Disk diameter | 800mm | 1000mm | 1200mm |
Detailed Images
Relation Productos
1 Hydraulic Diamond Wire Saw Machine
Hydraulic Diamond Wire Saw Machine is used to cut concrete, granite, rock, walls and beams
in construction of bridges, roads and tunnels. It is necessary for cutting and removing reinforced
concrete such as bridge sections, jetties, columns, beams and mining rocks.
Product details website link : https://yugongmachine.en.made-in
2 Chain Saw
Diamond chain saw is portable tool for partial cutting construction. It is safe, dust-free
and environmentally friendly. It is a high-tech cutting machine. It is powered by 380V
power supply and 220V power supply. It is a cutting carrier with a diamond cutter head.
It can be applied to various soft and hard rock cuttings with various rock and mine rock
hardness ≤12MPa.
Chain material classification:
1. Diamond chain (cut stone, masonry)
2. Alloy steel chain (cutting coal)
3. Ordinary chain saw (mine, cut tree)
Product details website link : https://yugongmachine.en.made-in
FAQ
1.Q:Are you manufacture or trade company?
We are manufacture focus on machiney over 20 years.
2.Q: What're your payments ?
A: T/T,Western Union,L/C etc.
3.Delivery & Shipping
Normally 7-20 working days, DHL/UPS/TNT/FEDEX,By air,or By sea.
4.After-Sales Service
Our sales team will response for your question within 24 hours(holidays excluded)
Training how to instal the machine, training how to use the machine.
