Audited Supplier
Calibration method: this module has a calibration function, do not worry about the problem of inaccurate measurement display, if you find that the display is not accurate, you can use the following method to calibrate. Just use the calibration once for the first time! Received baby advice according to the following method for a calibration!
Voltage calibration: in the case of power failure, hold down the "Set" button, power on, enter the voltage calibration mode, the LCD screen begins to blink, release the "Set" button, press the "Set" button to add, "OK" to reduce, calibrate to the correct input terminal voltage, such as: If the input voltage is 12.65V, then the current voltage is adjusted to 12.65V. After 2 seconds, it will be saved automatically. When the power is cut off, the calibration will be completed!
LCD screen with voltage, current double display, powerful!
The use of four layer plate design solid workmanship with material bearing more stable and reliable
Module parameters
Input voltage: 10-32V DC input
Output voltage: 11-60V DC continuous adjustable (it is recommended that the operating voltage should not exceed 55V, only applicable to the application where the input voltage is less than the output voltage, can not buck)
Output current: maximum 8A over 4A, please strengthen heat dissipation (supporting fans are available in our store! It is related to the pressure difference between input and output. The larger the pressure difference, the smaller the output current.
Output power: natural heat dissipation maximum 90W, enhanced heat dissipation maximum 150W
Module nature: non-isolated booster module (BOOST)
Output constant current range: 0.3-8A
Operating temperature: -10~+85 degrees (when the ambient temperature is too high, please strengthen heat dissipation)
Working frequency: 150KHz
Conversion efficiency: up to 95% (efficiency is related to input and output voltage, current and pressure difference)
Short circuit protection: none (do not use short circuit)
Input reverse connection protection: no, please add anti-connection anti-diode in the input end, our store has!
Output indicator: with charging indication, charging yellow full of blue
Output anti-backflow: Yes
Installation: Acrylic plates on the upper and lower sides, 8 copper columns, 8 3mm screws, it is easier to install the buttons in reverse!
Wiring mode: Wiring terminal or welding terminal, IN for input, OUT for output
Module size: length 80mm wide 53mm high 35mm
Weight: 135 g
The bottom plate of the module shell has a fan opening, which can be used to increase the heat dissipation of the fan. The supporting fan is available in our store! Fans to take another oh!
Setting Instructions:
The setting key can set the display mode, which can be divided into three types:
1, F-0 mode: display output voltage;
2, F-1 mode: display the input voltage;
3, F-2 mode: alternately display input and output voltage;
Instructions: Press the "Set" button to display three display modes, and the corresponding indicator light will be on or off. Press the "OK" button to save and exit. Press the "OK" button alone to switch the backlight of the LCD screen.
China Dragon Electronic Industrial Co., LTD.
We provide a one-stop service including PCB fabrication, components sourcing and SMT assembly, wave soldering ,burning software,final assembly and function testing.
18 Years PCB & PCBA Factory SMT DIP Bare PCB And Electronic Components Assembly
One-stop Service
Our industry
If you need high reliable PCBA manufacturing services, Welcomed to contact us at anytime.
China Dragon Electronic Industrial Co., LTD. is a professional PCB&PCBA manufacturer in Shenzhen China.Our provide high quality bare PCB and PCB assembly service,including components sourcing, function test,conformal coating and complete assembly for clients all over the world.
Our Process capability:
Article | Description | Capability | |
Sercive | PCB and SMT assembly with one-stop service | ||
Material | Laminate materials | FR4, high TG FR4, high frequency, alum, FPC | |
Board cutting | Number of layers | 1-48 | |
Min.thickness for inner layers (Cu thickness are excluded) | 0.003"(0.07mm) | ||
Board thickness | Standard | (0.1-4mm±10%) | |
Min. | Single/Double:0.008±0.004" | ||
4layer:0.01±0.008" | |||
8layer:0.01±0.008" | |||
Bow and twist | no more than 7/1000 | ||
Copper weight | Outer Cu weight | 0.5-4 0z | |
Inner Cu weight | 0.5-3 0z | ||
Drilling | Min size | 0.0078"(0.2mm) | |
Drill deviation | ±0.002″(0.05mm) | ||
PTH hole tolerance | ±0.002″(0.005mm) | ||
NPTH hole tolerance | ±0.002″(0.005mm) | ||
Solder mask
| Color | Green,white,black,red,blue… | |
Min solder mask clearanace | 0.003″(0.07mm) | ||
Thickness | (0.012*0.017mm) | ||
Silkscreen | Color | white,black,yellow,blue… | |
Min size | 0.006″(0.15mm) | ||
E-test | Function Test | 100% Functional test | |
PCBA Testing | X-ray,AOI Test,Functional test | ||
Pcb assembly | one-stop service electronic manufacxturer service | ||
Component sourcing | Yes | ||
Certificate | IATF16949, ISO13485, ISO9001 | ||
Delivery time: | PCB | 3-8days | |
PCBA | 10-20days | ||
Tolerance of pcb | ±5% | ||
Max size of finish board | 700*460mm | ||
MOQ | NO MOQ (1pcs) | ||
Surface Finish | HASL,ENIG,immersion silver,immersion tin,OSP… | ||
PCB outline | Square,circle,irregular(with jigs) | ||
package | QFN,BGA,SSOP,PLCC,LGA | ||
Sub-assembly | Plastic,metal,screen | ||
Our PCB
Our PCB factory
Our SMT factory
Our components
Our delivery and payment
FAQ
1, What service do you have?
We provide turnkey solution including PCB fabrication, SMT, plastic injection & metal,final assembly, testing and other value-added service.
2, What is needed for PCB & PCBA quotation?
For PCB: Quantity, Gerber file and technic requirements(material,size, surface finish treatment, copper thickness,board thickness).
For PCBA: PCB information, BOM,Testing documents.
3, How to keep our product information and design file secret ?
We are willing to sign a NDA effect by customers side local law and promising tokeep customers data in high confidential
level.
4, What are the main products of your PCB/PCBA services?
Automotive, Medical, Industry Control,IOT,Smart Home,Military.
5, What is your minimum order quantity (MOQ)?
Our MOQ is 1 PCS, sample and mass production all can support.
6, Are you factory?
Our factory is located in 22 Building, TangMian Road, XinQiao Village, ShaJing Street, BaoAn shenzhen, china.
contact us
