Audited Supplier
DE-120T Solid Liquid Powder Specific Gravity Meter, Chemical Density Measurement Device
Application
It is suitable for the field of quality management,cost control,new formula
researching,new materials researching, scientific academies, researching key laboratories,quality inspection.dye,bleach,leather,glaze,clay suspension.,etc industrial.
Standards
According to the ASTM D792,ASTM D297,GB/T1033,GB/T2951,JIS K6268,ISO 2781,ISO 1183,GB/T11540,GB/T12206,GB/T5518 standards etc.
DE-120T can measure the density of solid and liquid; Features of simple operation,wide application,fully function; alarm rings when judge density is unqualified through the top and bottom limitation setting.About the solid mode,function of measuring DIN volume abrasion loss and expansibility of rubber,actual density and apparent density of powder,oil content of oil bearing,density of high density products.etc. adopt the memoryless dynamic measurement method for liquid mode; function of measuring density with three mode,get out of the cumbersome operation of re-calibrate when change weight. Function of displaying concentration,density and baume.
Specifications
Density resolution: 0.0001 g/cm3
Maximum weight:120g
Minimum weight: 0.001g
Measurement range: 0.0001-99.9999g/cm3
Features
(1) No need to open and close the lid,simple operation,shorter time measuring,according to the specification of new materials laboratory.
(2) Show the percentage composition of mixed samples for researching and developing new materials.
(3) Automatically judge whether density is qualified or not;prompt alarm.
(4) Function of solution compensation.either liquid or water can be used as medium.
(5) Function of setting actual water temperature,measuring medium density,and water proof medium density.
(6) Function of setting aerostatic buoyancy and the bound of density.
(7) Adopt the completed high-capacity measurement accessories with the transparent injection mould tank,which can resist wear,fall off,and corrosion.
(8) Density value of samples with the temperature from normal to 100 centigrade can be measured.
(9) Take samples conveniently;50CC or less would be okay.
(10) It is very easy to clean the measurement cup,and can't got the limitation of the size of pycnometer caliber.
(11) Volatile liquid,corrosivity liquid,vicidity liquid,strong acid and strong lye liquid can be measured quickly.
(12) Adopt the completed special windproof and dustproof cover,which makes the structure convenient and durable.
(13) Interface of RS-232C is included.the printer of DE-40 will be available to connect PC with instrument.
Measurement procedure of solid mode
- Place the sample on the test board to measure weight in air,press ENTER button to memory.
- Place the sample into the water to measure the weight,press ENTER button to memory.density value will be displayed
Measurement procedure of liquid mode
- Place breaker with samples on testing board.and take off the weigh of pothook.
- Make standard weight hanged on the pothook and submerged into the liquid to be tested totally.press the ENTER button to memory.Density value will be displayed.
Measurement procedure of hydroscopicity products(porosity products)
- Place the sample on the testing board to measure weight in air,press ENTER button to memory.
- Place the sample that did the waterproof treatment into water to measure the weight in water,press the ENTER button to memory.density value will be displayed.
Specification Table
| Brand | DAHOMETER | ||
| Model | DE-120T | ||
| Density resolution | 0.0001 g/cm3 | ||
| Weight range | 0.001~120g | ||
| Density range | 0.0001-99.9999g/cm3 | ||
Solid | Measuring solid items | Density of all forms of solid,including metal,rubber,plastic,film,floating body,powder,foam,viscous body,structure,tubing,wood,sponge,glass,pitch,cement,soil,gem,paper,concrete,graphite,coal,rock,ceramic.etc.(cover the products of | |
| Measuring mode | Archimedes principle | ||
| Measurable project | density of general non-absorbency solid | ||
| About 5 seconds | ||
| Memory method | memory in shorter time by one procedure | ||
| Specific gravity measurement frame | unicase injection forming professional specific gravity mesaturement frame | ||
| Measurement tank | unicase injection forming transparent professional measurement tank | ||
| Result disply | Disply according to the model:density,specific gravity,apparent density,volume density,wet density,total porosity,effective porosity,oil content,water absorption,wear loss,wear index,expansibility,volume and so on. | ||
| Funtion setting | Water temperature setting,density setting of medium of comparative solution,density setting of medium of waterproofing treatment ,boung setting,aerostatic buoyancy setting, | ||
Mixed | Function introduction | automatically read the percentage of the main material in the two kinds of mixed materials | |
| setting | freely set the density value of main material and subordinate material | ||
| disply | density value,percentage of main material | ||
liquid | Measurement type | a:mobility liquid,vicidity liquid,volatile liquid,corrosivity liquid,high temperature liquid,suspension liquid,emulsion and so on. | |
| Measurement principle | Archimedes principle displacement method | ||
Measurement | 3 group | ||
| Measurement time | about 5 seconds | ||
| Memory mode | memory in shorter time by one procedure | ||
| Result disply | Density and baume | ||
Specific | stainless steel specific gravity measurement frame | ||
| Function setting | Temperature setting,density setting, measurement weights setting of standard sensor ball and weights setting in the water | ||
Measurement | distilled testing | ||
Calibration | auto correction with one button,auto detection. | ||
| Output mode | standard interface of RS-232,output and | ||
| Standard accessories | Host,tank,test board,tweezers,thermometer,100G weight,wind and dust cover,a set of measuring floating body parts ,power transformer,DE-20A standard liquid measurement assembly | ||
| Optional accessories | DE-40 printer,DE-20B anti corrosive liquid measurement assembly | ||
| power | AC100V - 240V | ||
| Main feature | data display,accuracy,speediness,convenience | ||
Packaging
Our Services
- 100% Competitive price we are the original manufacturer of densimeter for years, the large scale production make our products more competitive, that's the reason we are very confident to offer the most possible competitive price for the same level testing instruments in the world.
- High quality standards we have the powerful professional researching and technology team to support quality;Our quality has been proved by the good market reaction for years;Our product are built to meet the industrial standards and global standards;Every instrument get checked and approved by our QC before delivery.
- Faultless service we have the professional customer service team to provide the one to one service for you;we can help you to enjoy the one-stop service without any worries;we have the completed after-sales service policy and quality insurance policy;we guarantee instruments for one year and life-long maintenance(Gold Purity Tester for two years)
- Efficient logistics we have the stable partner to help us to deliver the goods to the any corner of the worldwide shortly.Air shipment;International express:DHL/UPS/FEDEX/TNT(5 days to 7 days)
- OEM service We are the original manufacturer of densimeter,that is verified by the third party on site;We can provide you OEM service and print your logo on the instruments.
Company Information
We, Dongguan Hongtuo Instrument Co., Ltd, a China based company, are pleased to introduce ourselves as a notable testing equipments and machines manufacturer.Our company was established in the year 2000 with two primarily motto, which includes complete client satisfaction and to reach top-most position in the international market. The exceptional quality of our products like Gold Tester,Gold Testing Machine,Density Meter,Universal Tensile Testing Machine,Climatic Chamber,Melt Flow Index Tester,Charpy Impact Testing Machine,Tap Density Tester,Abrasion Tester,Ultrasonic Flaw Detector,Surface Roughness Tester and other Laboratory Testing Equipment, etc. is our company's USP.
Certifications
