Audited Supplier
( DSP-60/DSP-120/DSP-200KW,DSP-300KW)
Using DSP and ARM full digital control circuit, the equipment has rich communication interface, support optical fiber, Ethernet, RS485/233, Profibus, CAN and other industrial buses, CAN achieve remote control
1 6 Channel Temperature system testing
2 Quick Heating: Reach the target temperature quickly!
3 More options for working mode: Time, temperature, Power,constant Power and so on. Can know the heating curve.
4 Full digital embedded control software, high heating accuracy, programmable control, can achieve remote monitoring and remote control; Full Digital control, can shows heating time,heating power, heating current, Heating impedance, frequency and so on in the machine.
5 High temperature: the heating temperature can reach over 700C.
6, Industrial design, can calmly face a variety of complex working conditions, better compatibility, can cope with different sizes, different shapes, different specifications of large workpiece installation and disassembly, different size preheat and post welding application.
7 High safety, the product through strict safety test, leakage protection and other protective measures, to ensure the safety of the use process, will not cause harm to personnel and facilities;
8 The machine has transformer, more safety special for Heating
9 High reliability, large redundancy, high specification selection, to ensure continuous high-strength operation of equipment.
10 Air Cooled type, no need get water, easier to work different work site. More Stable compare with water cooled type.
11 IGBT type, Most Save electricity.
12 Manual Working and Temperature Control Working Mode
13Over Current, Over Voltage, Fail Phase, Driver Board Over Current , Loading abnormal, out off control protection.
| Name | Full Digital Air Cooled Induction Heating Machine | ||||||
| Work Mode | Manual Mode and Temperature Mode | ||||||
| Alarm System | Over Current, Over Voltage, Fail Phase, Driver Board Over Current , Loading abnormal, out off control protection. | ||||||
| Special Function | Using DSP and ARM full digital control circuit, the equipment has rich communication interface, support optical fiber, Ethernet, RS485/233, Profibus, CAN and other industrial buses, CAN achieve remote control | ||||||
| Model | DIH-60KW | DSP-120KW | DIH-200KW | DIH-300KW | |||
| Output Power | 60KW | 120KW | 200KW | 300KW | |||
| Frequency | 0.5-10khz | 0.5-10KHZ | 0.5-10KHZ | 0.5-10KHZ | |||
| Work Voltage | 380V/415v/440v/480v*3phase 50-60hz | ||||||
| Power Factor | 0.93 | ||||||
| Min Circuit Breaker | 3P-125 | 3P-160 | 3P-200 | 3P-600 | |||
| Cooling Way | Air Cooled Type | ||||||
Packing:
Pre-sale service:
1. recommend the most suitable machine for customers, according to their requirements.
2. Inquiry and consulting support.
3. Sample testing support.
4. View our Factory.
In-sale service:
1. Strictly manufacture the machine, according to relevant technical standards.
2. Take run test, according to relevant equipment test run regulations.
3. Strictly check up the machine, before delivery
4. Delivery on time.
After-sale service:
1. Warranty time: Within 18 months from the date of delivering, 12months from date of receiving.
2. Within warranty all parts are free for customer, any fault caused by non-artificial reason, any quality problems such as design, manufacture, or procedure occurs, We shall provide replacement parts after detecting the faults.
3. If any big quality problems occurs out of the guarantee period, we will send maintenance
technician to provide visiting service after checking with the customer and charge for a favorable price.
5. We will provide a lifetime cost price to the buyer with the materials and spare parts used in system operation, equipment maintenance.
6. The above mentioned are only basic aftersale service requirements,we will make more promises related to quality assurance and operation guarantee.
