Audited Supplier
48V(51.2V)
10 Years
5kwh/10kwh/16kwh
6000times
51kg
100ah 200ah 300ah
200A
200A
0ºC~60ºC
-30ºC~60ºC
RS485/Can/RS232
Month≤3%
≤3%
IEC,CE,Un38.3,MSDS
HUA YOU
Carton
455*575*230mm
China
8507600090
Product Description
| Type | Voltage | Capacity | Energy | Width | Depth | Height | Weight |
| 25.6V200Ah-Hang series | 25.6Vdc | 205Ah | 5248Wh | 455mm | 575mm | 230mm | 51kg |
| 51.2V100Ah-Hang series | 51.2Vdc | 100Ah | 5120Wh | 425mm | 640mm | 157mm | 51kg |
| 51.2V200Ah-Hang series | 51.2Vdc | 205Ah | 10496Wh | 455mm | 750mm | 230mm | 88kg |
| 51.2V200Ah-Wheel series | 51.2Vdc | 205Ah | 10496Wh | 455mm | 750mm | 230mm | 87kg |
| 51.2V300Ah-Wheel series | 51.2Vdc | 314Ah | 16076Wh | 455mm | 900mm | 235mm | 120kg |
| Product Model | 51.2V200Ah-Wall mounted | 51.2V200Ah-Wall mounted | 51.2V200Ah-Wall mounted/Wheel series | 51.2V314Ah-Wheel series | |
| Specification | |||||
| Nominal Capacity(kWh) | 5.12 | 10.24 | 10.24 | 15.36(16.07) | |
| Dimension (W*H*D mm) | 425*640*157 | 455*750*230 | 455*750*230 | 460*900*235 | |
| Net Weight (kg) | 51 | 88 | 87 | 120 | |
| General | |||||
| Battery Type | LiFePO4 Cell | ||||
| Nominal Voltage(V) | 51.2 | ||||
| Operating Voltage(V) | 43.2~58.4 | ||||
| Nominal Capacity(Ah) | 100 | 200 | 200 | 300 | |
| Depth of Discharge | 90% | ||||
| Max.Charge/Discharge Current(A) | 100 | 200 | 200 | 200 | |
| Operating Temperature | Charge: 0-50ºC Discharge: -20-55ºC | ||||
| Storage Temperature (recommend) | -20-55ºC(15ºC~35ºC) | ||||
| Communication | RS485 / CAN / RS223 | ||||
| Humidity | 10%-85% (no condensing) | ||||
| Altitude | ≤ 2000m | ||||
| Cycle Life | ≥ 6000,25ºC | ||||
| Protection Level | IP21 | ||||
| Warranty | 5 years | ||||
| Certification | |||||
| Transportation | UN38.3, MSDS | ||||
| Product Model:HYLV-16K | |||||
| Battery Specification | |||||
| NO. | Item | Specification | Remark | ||
| 1 | Nominal Voltage | 51.2 V | |||
| 2 | Nominal Capacity | 314 Ah | |||
| 3 | Nominal Capacity | 16.076 kWh | |||
| 4 | Operating Voltage | 43.2 V~58.4V | |||
| 5 | Max.Charge Current | 200 A | |||
| 6 | Max.Discharge Current | 200 A | |||
| 7 | Operating Temperature- Charge | 0ºC~50ºC | Recommmend: 15ºC~35ºC | ||
| 8 | Operating Temperature- Discharge | -20ºC~55ºC | |||
| 9 | Communication | RS485/CAN/RS232 | |||
| 10 | Self Discharge | Month≤3% | |||
| 11 | SOC Estimated Value | ≤3% | |||
| 12 | Size | 900mm*455mm*235mm | |||
| 13 | Net Weight | 120kg | ±2kg | ||
| Cell Specification | |||||
| NO. | Item | Specification | |||
| 1 | Battery Type | LiFePO4 | |||
| 2 | Nominal Voltage | 3.2V | |||
| 3 | Nominal Capacity | 314Ah | |||
| 4 | Nominal Capacity | 1004.8Wh | |||
| 5 | AC Internal Resistance | 0.17±0.05mΩ | |||
| 6 | Max.Charge/ Discharge Current | 200A | |||
| 7 | Charging Cut-off Voltage | 3.65 V | |||
| 8 | Discharge Cut-off Voltage | 2.7 V | |||
| 9 | Absolute Charging Temperature | 0ºC~50ºC | |||
| 10 | Absolute Disharging Temperature | -20ºC~55ºC | |||
| 11 | Storage Temperature | 10ºC~30ºC (Recommend) | |||
| 12 | Cycle Life | ≥6000times,25±2ºCInitial clamping force 300±20Kgf,Standard charge-discharge test,70%Nominal Capacity | |||
| 13 | Size(thickness×width×height) | 72.0(±0.8)mm×173.9(±0.8)mm×207.2(±0.5)mm | |||
| 14 | Weight | 5.60±0.15kg | |||
| BMS Specification | |||||
| NO. | Indicator Item | Default Parameters | Settings Ajustable | Remark | |
| 1 | Monomer overcharge protection | Monomer overcharge alarm voltage | 3600mV | Yes | |
| Monomer overcharge protection voltage | 3650mV | Yes | |||
| Monomer overcharge protection delay | 1.0S | Yes | |||
| Monomer overvoltage protection release | Release voltage of monomer overcharge protection | 3380mV | Yes | ||
| Capacity release | SOC<96% | Yes | |||
| Discharge release | Discharging Current > 2A | ||||
| 2 | Monomer over-discharge protection | Monomer over-discharge alarm voltage | 2800mV | Yes | After 30 seconds of over-discharge protection, if it still cannot be recovered, it will enter the low power consumption mode. |
| Monomer over-discharge protection voltage | 2700mV | Yes | |||
| Monomer over-discharge protection delay | 1.0S | Yes | |||
| Monomer over-discharge protection delay | 2950mV | Yes | |||
| Release when charging | Plug in charger to activate | ||||
| 3 | Overall overcharge protection | Overall overcharge alarm voltage | 57.6V | Yes | |
| Overall overcharge protection voltage | 58.4V | Yes | |||
| Overall overcharge protection delay | 1.0S | Yes | |||
| Overall overvoltage protection release | Release voltage of overall overcharge protection | 54V | Yes | ||
| Capacity release | SOC<96% | Yes | |||
| Discharge release | Discharging Current > 2A | ||||
| 4 | Overall over-discharge protection | Overall over-discharge alarm voltage | 44.8V | Yes | After 30 seconds of over-discharge protection, if it still cannot be recovered, it will enter the low power consumption mode. |
| Overall over-discharge protection voltage | 43.2V | Yes | |||
| Overall over-discharge protection delay | 1.0S | Yes | |||
| Overall over-discharge protection release | Overall over-discharge protection delay | 47.2V | Yes | ||
| Release when charging | Plug in charger to activate | ||||
| 5 | Charging overcurrent protection | Charging overcurrent alarm current | 205A | Yes | 10 consecutive occurrences will lock this state and will not be automatically released. |
| Charging overcurrent protection current | 210A | Yes | |||
| Delay of charging overcurrent protection | 1.0S | Yes | |||
| Charging overcurrent protection release | Automatic release | Automatic release after 1min | |||
| Discharge release | Discharging Current > 1A | ||||
| 6 | Discharge overcurrent 1 protection | Disharging overcurrent 1 alarm current | 205A | Yes | |
| Disharging overcurrent 1 protection current | 210A | Yes | |||
| Delay of charging overcurrent 1 protection | 1.0S | Yes | |||
| Discharge overcurrent 1 protection Release | Automatic release | Automatic release after 1min | |||
| Charge release | Charging Current > 1A | ||||
| 7 | Discharge overcurrent 2 | Disharging overcurrent 2 protection current | ≥250A | Yes | 10 consecutive occurrences will lock this state and will not be automatically released. |
| Delay of charging overcurrent 2 protection | 500mS | Yes | |||
| Discharge overcurrent 2 protection Release | Automatic release | Automatic release after 1min | |||
| Discharge release | Charging Current > 1A | ||||
| 8 | Short circuit protection | Short circuit protection function | Yes | ||
| Short circuit protection release | When charging, the short circuit protection is released. | ||||
| When the load is removed, it will be automatically released. | |||||
| 9 | MOS High Temperature Protection | MOS overtemperature alarm temperature | 90ºC | Yes | |
| MOS overtemperature protection temperature | 115ºC | Yes | |||
| MOS Protection release temperature | 85ºC | Yes | |||
| 10 | Cell temperature protection | Charging low temperature alarm temperature | 5ºC | Yes | |
| Charging low temperature protection temperature | 0ºC | Yes | |||
| Release temperature of charging low temperature protection | 5ºC | Yes | |||
| Charging high temperature alarm temperature | 55ºC | Yes | |||
| Charging high temperature protection temperature | 60ºC | Yes | |||
| Release temperature of charging high temperature protection | 50ºC | Yes | |||
| Disharging low temperature alarm temperature | -25ºC | Yes | |||
| Disharging low temperature protection temperature | -30ºC | Yes | |||
| Release temperature of discharging low temperature protection | -20ºC | Yes | |||
| Disharging high temperature alarm temperature | 55ºC | Yes | |||
| Disharging high temperature protection temperature | 60ºC | Yes | |||
| Release temperature of discharging high temperature protection | 50ºC | Yes | |||
| 11 | Environmental temperature alarm | Environmental low temperature alarm temperature | -25ºC | Yes | |
| Environmental low temperature protection temperature | -30ºC | Yes | |||
| Environmental low temperature protection release temperature | -20ºC | Yes | |||
| Environmental high temperature alarm temperature | 60ºC | Yes | |||
| Environmental high temperature protection temperature | 70ºC | Yes | |||
| Environmental high temperature protection release temperature | 60ºC | Yes | |||
| 12 | Consumption current | Self-consumption current at work | ≤75mA(With display screen) | ||
| Low power mode current | ≤200μA | ||||
| 13 | Equalization function | Balanced turn-on voltage | 3400mV | Yes | |
| Opening pressure difference | 30mV | Yes | |||
| 14 | Capacity default setting | Low battery alarm threshold | SOC<5% | Yes | No alarm when charging. |
| 15 | Dormancy function | Dormant voltage | 3150mV | Yes | |
| Delay time | 5min | Yes | |||
| 16 | Cell Expire protection | Monomer pressure difference | Pressure Difference>1V | No | Charging and discharging are not allowed. |
| 17 | Fully charged | Fully | >56V | Yes | At the same time, stop charging and update SOC to 100%. Stop charging after simultaneous satisfaction and update SOC to 100% |
This series of lithium battery products are suitable for applications in low-voltage small and medium-sized energy storage systems.
These products adopt the highest safety performance lithium iron phosphate cells, with a high-precision battery management system (BMS). The BMS monitors and collects real-time data on voltage, current and temperature of each cell within the module. The BMS also has a passive balance function and advanced battery control strategy, further enhancing the performance of the battery pack. The battery module consists of LFP cells, BMS, housing and wiring. Each module is equipped with comprehensive protection functions. The modules can be establish communication with the external devices through CAN /RS485. The modules interact with each other through RS485. The modules can be connected in parallel to meet the expansion needs, with a maximum support capacity of 16 modules.
Founded in 2020, Jiangsu Huayou Energy Technology Co., Ltd. is a high-tech enterprise jointly initiated by Zhejiang Huayou Cycle Technology Co., LTD., a wholly-owned subsidiary of Zhejiang Huayou Cobalt Co., LTD. (Stock code :603799), Toyota Tsusho (China) Co., LTD., China Merchants Group and China Electric Automobile 100 People's Association.
The company is committed to the exploration and realization of the value chain of the full life cycle of dynamic power lithium batteries, and through the development of cloud platform battery data detection technology, core energy control system technology and product creation, innovative operation model practice, and the construction of energy big data network operation platform, is committed to becoming a leading smart energy network solution provider. Ensure clean, safe, economical and efficient energy supply!
1. Can I have samples to test? And what is lead time?
Yes, we can supply samples, the lead time for samples is 7 days, and buyer pay for sample cost and shipping cost. Some are in stock and can be delivered at any time.
2. What kind of certificates do you have?
We can provide CE, ROHS, FCC, IEC62133, MSDS, UN38.3, ISO9001 etc.
3.Are you battery real capacity?
All of our battery cells with Grade A,100% new and real capacity. We promise 100% Top grade A. If you found it is not A battery cell, you can contact us for refund.
4.Can I print my LOGO on it?
YES, LOGO/sticker/OEM/ODM welcomed.
5.What is your after-sales service?
We provide 7*24h online support.
6. Payment details?
* Pay through T/T, Western Union, PayPal…
*Price term: FOB Shenzhen port, CFR, CIF.
*The customer is responsible for any tax or bank charges by their country.
*T/T 30% as deposit, T/T 70% before shipment, other payment terms can be discussed according to the order quantity.
7.Do you have MOQ ?
No limited. Small order also welcome.More quantity has better price, we will check the best price for you.
