Audited Supplier
CGM25-30GM-L7 series
25mm
0~23mm
-25ºC~70ºC(248-343K)
2m, PVC
Brass, Nickel Plating
PBT
cheemi
China
85365000
Product Description
- Inductive proximity switch is a device for realizing the non-electrical measurement by inductive winding or the change of coefficient of mutual induction.
- It has high resolution and accuracy for the monitoring and measurement of presence, movement and position of metallic objects.
- The operating distance of the sensor depends on the coil's size as well as the target's shape, size and material.
- It is divided into two categories according to the working state : NO - Normal Open type NC - Normal Close type
- Longer sensing distance,can be installed in narrow space, mechanical tolerances or through the protective flim used in detection.
- Power supply reversal connection protection; short-circuit protection, can directly connect with PLC
- Newly added current over-load protection; the elements are made of imported chip
- Long service life, high reliability and strong resistance property to environment
- Red LED indicates that it's available to detect the sensor operating state
- Full thread shape to enlarge the installation space; can use wrench and clamp directly
- Countermeasure to improve the housing intensity and to solve disconnection IP67 protection structure(IEC specification)
| Ordering Part Number: | ||||
| Model | Detection distance | Switch point function | Working voltage | |
| CGM25-30GM-N1-L7 | 25mm+10% | NPN NO | DC6-36V | |
| CGM25-30GM-N2-L7 | 25mm+10% | NPN NC | DC6-36V | |
| CGM25-30GM-N4-L7 | 25mm+10% | NPN NO+NC | DC6-36V | |
| CGM25-30GM-P1-L7 | 25mm+10% | PNP NO | DC6-36V | |
| CGM25-30GM-P2-L7 | 25mm+10% | PNP NC | DC6-36V | |
| CGM25-30GM-P4-L7 | 25mm+10% | PNP NO+NC | DC6-36V | |
| CGM25-30GM-D1-L7 | 25mm+10% | DC NO | DC10-30V | |
| CGM25-30GM-D2-L7 | 25mm+10% | DC NC | DC10-30V | |
| CGM25-30GM-A1-L7 | 25mm+10% | AC NO | AC90-250V | |
| CGM25-30GM-A2-L7 | 25mm+10% | AC NC | AC90-250V | |
| Structure Parameter: | ||||
 | ||||
| Technical Parameter: | ||||
| Rated action distance (Sn) | 25mm | |||
| Installation | Flush-mounting | |||
| Reliable movement distance (Sa) | 0~23mm | |||
| Response frequency (N.P) | 0.4kHZ | |||
| Responsc frcqucncy (D) | 0.5kHZ | |||
| Response frequency(A) | 25HZ | |||
| Hysteresis (H) | Typical values% | |||
| Reverse polarity protection | Yes | |||
| Short circuit protection | Pulse | |||
| Lcakage current (r) | 0~0.5mA typical valucs 0.luA, 25ºC | |||
| No-load current (lD) | ≤15mA | |||
| Insulation impedance | 50M Ω | |||
| Indicator light | Red LED | |||
| envronment temperature | -25ºC~70ºC(248-343K) | |||
| Connection fomm | Connector | |||
| Shell material | Brass, Nickcl plating | |||
| Induction surface | PBT | |||
| Protection grade | IP65 | |||
| Standard | EN 60947-1:2004 | |||
| Remarks: | ||||
| Inductive proximity sensors detect the metallic objects. The detection distance may fluctuate with the different materials of the detected target.Custom design in the different rated input current and the output voltage are available. Both the configuration parameters and the cable length can be customized. Standard cable length 2M. If no explicit requirement for the output polarity, the proximity sensor will be supplied based on NPN mode. | ||||
| WARNING : Incorrect wiring may cause damage to the sensor. | ||||
Purchase only when you are satisfied with the FREE samples.
* Please let us know what kind of model, working voltage, input & output signals, mounting size.
* Or tell us your techincal requirement for the sensor selection.
* OEM/ODM is welcomed.
CHEEMI TECHNOLOGY CO.,LIMITED.
Certification: ISO9001, CE, ROSH.
( Your reliable sensor-solution partner for Hall Current & Voltage Transducers, Proximity Switches/sensors, RTD Temperature Sensors, Current Transformers, Pressure Transmitter, Liquid Level Transmitter. )
Address:3/F, Building 6, Jingang Science and Technology Innovation Park, No.1 Kechuang Road, Qixia District, Nanjing, China.
Post code: 210000
Tel: +0086-025-85996365
Web: current-sensor.en.made-in-china.com
Package
* All our sensors will be well packed with bubble & carton. (Bubble packing→4 small carton→1 big carton)
* You can choose your own label(Screen Print or Laser Engraving).
* Can be netural packing or OEM.
Shipping
* Products are shipped via UPS / DHL/ FedEx / TNT, etc. (door to door), or air & sea shipment for larger qty.
* L/T: 3-7 days upon receiving payment if the qty is lower than 1000PCS and it is not customized products.
* Shipping via DHL. UPS. FedEx and TNT express usually takes 3~7days dependent on the destination country.
Warranty
* We provide 1 year warranty.
* If the product is defective, please notify us within 3 days after receiving.
* All products must be returned on their original condition, in order to qualify for a refund or exchange of goods.
Our Commitment
* Better Price than other suppliers for you because of Factory Direct Sale;
* Better Quality than before caused by our 10+ years experience about sensors;
* Fast Delivery made by our Enthusiasm;
* Timing Reply in 24 hours all about our TEAM's Passion & Patience.
