MH
Accept
1
25-50mm
Burnishing Tool
Taixi
Bubble Film or Carton
Customized
China
82078090
Product Description
WHAT IS BURNISHING?
Burnishing is a chipless machining method which cold works the metal without cutting or abrading the surface.
It removes no metal but rather compresses, or "irons-out" the peaks of a metal surface into the valleys, generating a dense and uniform surface.
Roller burnishing improves surface finish and results in dimensional accuracy.
Burnishing is the best way to improve a surface finish, enhance part quality and eliminate costly finishing operations. Eliminate secondary operations, improve surface finish and save time and money with our burnishing tools.
Our team has worked with thousands of different applications. If you have a question or are wondering if your application is a good fit for burnishing, please feel free to contact us.




Carbide-roll burnishing tools
Diamond head roller burnishing tool
Burnishing is a chipless machining method which cold works the metal without cutting or abrading the surface.
It removes no metal but rather compresses, or "irons-out" the peaks of a metal surface into the valleys, generating a dense and uniform surface.
Roller burnishing improves surface finish and results in dimensional accuracy.
Burnishing is the best way to improve a surface finish, enhance part quality and eliminate costly finishing operations. Eliminate secondary operations, improve surface finish and save time and money with our burnishing tools.
Our team has worked with thousands of different applications. If you have a question or are wondering if your application is a good fit for burnishing, please feel free to contact us.





NO. | PROGRAME | PARAMETER | DESCRIPTION |
1 | Produce life | Design life for 45# steel products can be continuously processed for more than 2000 hours | There are still other effects that reduce the life of the product in different situations. |
2 | Processing effect | Ra0.05-0.4(It depends on different reasons. Such as material, lathe, rolling speed, prepare and so on) | |
3 | Processing range | The minimum recommended outer cylinder diameter is 5mm and above. The minimum recommended inner hole diameter is 150mm above. End faces, flat surfaces, curved surfaces, etc. can be processed. | |
4 | Feed quantity | 0.1-0.5mm(single side 0.1-0.5mm) | According to different materials about the hardness. Choosing adapt feed quantity. |
5 | Roll interference | 0.005-0.01mm | |
6 | Rolling speed | Lathe:0.1-0.3mm/r CNC-lathe: F100-F400 | |
7 | Linear Velocity | 80-200m/min | It can be adjusted according to the stability of the lathe. |
8 | Back chipping margin | Back chipping margin 1.0mm for Steps below 10.2mm. Back chipping margin 3.5mm for Steps above 10.2mm. | |
9 | Processing requirements | Surface roughness<3.2μm, Clean surface | |
10 | Processing hardness requirements | HRC<40. Best effective | |
11 | Other requirements | 1. It is recommended to use emulsion to cool the processing, and small workpiece can be cooled with lubricating oil. 2. After a long period of use, the gap adjustment hole must be checked. The gap adjustment is worked by the gap is tightened and then relaxed slightly. Keep the smooth wheel rotation. |
NO. | PROGRAME | PARAMETER | DESCRIPTION |
1 | Material | Using southern diamond and domestic high-quality materials. | Imported core parts |
2 | Produce Life | Design life for 45# steel products can be continuously processed for more than 1500 hours | There are still other effects that reduce the life of the product in different situations. |
3 | Processing Effect | Ra0.05-0.4(It depends on different reasons. Such as material, lathe, rolling speed, prepare and so on) | |
4 | Processing Range | The minimum recommended outer cylinder diameter is 5mm and above. The minimum recommended inner hole diameter is 150mm above. End faces, flat surfaces, taper surfaces, etc. can be processed. | |
5 | Feed Quantity | 0.03-0.05mm(single side 0.02-0.05mm) | According to different materials about the hardness. Choosing adapt feed quantity. |
6 | Roll Interference | 0.005-0.01mm | |
7 | Rolling Speed | Lathe:0.05-0.15mm/r CNC-lathe:F50-F150 | |
8 | Linear Velocity | 80-150m/min | It can be adjusted according to the stability of the lathe. |
9 | Back Chipping Margin | Back chipping margin 1.0mm | |
10 | Processing Requirements | Surface roughness<1.6μm, Clean surface | |
11 | Processing Hardness Requirements | 18<HRC<68 | |
12 | Other Requirements | It is recommended to use emulsion to cool the processing, and small workpiece can be cooled with lubricating oil. The maximum feed quantity of single side should not be higher than 0.06mm. |