Audited Supplier
XMPYT-96/700
12 Months
12 Months
9200
Jarlo
Bulk
8000x1950x2190
China
8430509000
Product Description
XMPYT-97/700 Scaling Rig
Structure and Dimensions
Min. Turning Radius
Max. Working Height
Main configuration
Main technical parameters
| Model | XMPYT-97/700 | ||||
| Item | Unit | Parameters | |||
| Unit performance | Dimensions | L | mm | 8000(standard type) | |
| 8790 (dust reducing optional) | |||||
| W | mm | 1950 | |||
| Min. height | mm | 2190 | |||
| Max. height | mm | 2500 | |||
| Min. turning radius | mm | Inner:≤3340 Outer:≤5160 | |||
| Min. ground clearance | mm | 300 | |||
| Max. working Height | mm | 9200 | |||
| Total weight | kg | 11800±200 | |||
| Articulated steering angle | (°) | ±40 | |||
| Boom | Working pressure | MPa | 16 | ||
| Rated pressure | MPa | 17.5 | |||
| Work flow | L/min | ≥25 | |||
| Boom swaying angle(left & right) | ° | ±60 | |||
| Hydraulic rock breaker | Impact power | J | ≥700 | ||
| Impact frequency | Hz | 7.5-12.5 | |||
| Rod Diameter | mm | 68 | |||
| Weight | kg | 165 | |||
| Work flow | L/min | 40-70 | |||
| Work Pressure | MPa | ≤14 | |||
| Chassis | Drive mode | - | Tyre type(Articulated) | ||
| Driving speed | Fast gear | km/h | 21.0±2.1 | ||
| Slow gear | km/h | 9.0±0.9 | |||
| Gradeability | (°) | 25 | |||
| Optional functions | Remote control system | Remote control of driving and boom's action | |||
| Water spray dust reduction | Equipped with water tank | ||||
Performance characteristics
- Hydraulic torque converter and gearbox drive engineering chassis, four-wheel drive, large driving torque, high shoveling ability, and strong climbing performance.
- The cab adopts mining safety ergonomic design and has passed FOPS and ROPS certification. Centralized control, reasonable layout, comfortable and convenient; the cab can be raised, lowered and tilted to facilitate precise operation.
- Hydraulic wet dual braking system, oil brake for driving and closed spring brake for parking which meet the safety usage requirements of mines with long slopes and low tunnels.
- The fully hydraulic telescopic and rotating mechanical arm has strong load-bearing capacity, stable movement, flexible operation and no construction blind spots.
- The articulated special chassis has a smaller turning radius and can meet the needs of tunnel operations to the greatest extent.
- The breaking hammer adopts industry-leading South Korean imported brand products, with stable performance, flexible reversal, high impact energy, small recoil force and long service life.
- The reinforced engineering chassis greatly enhances the rigidity and strength of the vehicle body, making the vehicle heavier and more stable in crushing.
- The boom is equipped with an overload protection system, which can effectively protect the boom and hydraulic cylinder during scaling.
- Equipped with a ballast cleaning shovel, which can quickly and properly clean the blast pile before removing the ballast, so that the scaling rig can be driven to the working site to clean the stones on the roof and side walls. It has better pass-ability and stronger adaptability.
