Audited Supplier
WDT-1208
CATV Equipment
Signal Transmitting Device
CE
New
8
6 Inputs and 2 Asi Inputs
1 Asi and 1 IP Output
Support Mpts and Spts
Prevail/Fobetmoc
Neutral
satellite receiver series
China
85176239
Product Description
DescriptionThe WDT-1208 is a new compact (1RU only) chassis and cost-effective multi-functional TS receiver which is designed by Hangzhou Prevail according to the DVB related standards. It is a project-based digital stream converter, fully comply with DVB-S/S2/T/T2/C standards and receive all non-encrypted digital programs at home and abroad. WDT-1208 has 6 RF input ports and 2 ASI input ports, 2 group ASI output after multiplexing with loop output, 1 Network management port and 1 IP output port. Through the Ethernet link, users can view the device status; set the Tuner parameters, signal quality control and other related functions, easy operation, friendly interface.
Application
1.Digital TV head-end system
2.DVB mode:MPTS
3.IPTV mode:SPTS
4.Remote video education
Compatible
Recommended Operating Conditions
Stress in excess of the maximum absolute ratings can cause permanent damage to the device (See Table 1)
Table 1 - Recommended Operating Conditions
Note: Support both 110V and 220V supply voltage standards, but please let us know which one do you need when you release order.
Specifications
Table 2 - Technical Specifications
Ordering Information
Process
Company Profile
contact us
The WDT-1208 is a new compact (1RU only) chassis and cost-effective multi-functional TS receiver which is designed by Hangzhou Prevail according to the DVB related standards. It is a project-based digital stream converter, fully comply with DVB-S/S2/T/T2/C standards and receive all non-encrypted digital programs at home and abroad. WDT-1208 has 6 RF input ports and 2 ASI input ports, 2 group ASI output after multiplexing with loop output, 1 Network management port and 1 IP output port. Through the Ethernet link, users can view the device status; set the Tuner parameters, signal quality control and other related functions, easy operation, friendly interface.
- Features
- 6 tuner inputs, 2 ASI inputs
- 2X2 ASI outputs and IP output
- Compatible with DVB-S/S2,DVB-T/T2,DVB-C
- IP module(option) up to 32 programs with SPTS mode
- Zero jitter on TS over IP output, support MPTS or SPTS
- PID filtering and re-mapping
- PSI/SI tables regeneration
- PCR correction
- Memory protection for power-fail
- Multi-languages and interfaces for choosing
- Signal strength, quality of instruction
- access via Ethernet link
Application
1.Digital TV head-end system
2.DVB mode:MPTS
3.IPTV mode:SPTS
4.Remote video education
Compatible
- EN 50083-9
- ISO/IEC 13818-1
- ETSI TR 101 1 54
- ETSI TR 101 891
- EN300 429
Recommended Operating Conditions
Stress in excess of the maximum absolute ratings can cause permanent damage to the device (See Table 1)
Table 1 - Recommended Operating Conditions
| Parameter | Symbol | Min. | Max. | Unit |
| Supply Voltage Note | V | 90 | 250 | V |
| Supply Frequency | F | 49 | 51 | Hz |
| power consumption | C | 25 | W | |
| Ambient Operating Temperature | Tw | 0 | +50 | °C |
| Storage Temperature | Ts | -25 | +55 | °C |
| Operating Humidity | H | 10 | 75 | % |
Specifications
Table 2 - Technical Specifications
| Project | Parameter |
| RF interface | |
| Number of port | 6 RF input ports with loop output |
| Standard | DVB-S/S2,DVB-T/T2,DVB-C |
| interface type | F-Female |
| Impedance | 75Ω |
| Input frequency | S/S2:950 ~ 2150MHz; DVB-T: 60~900MHz; DVB-C:50~860MHz |
| Signal level | -65~-25dBm |
| Symbol rate | 5.0~45Msym/s(QPSK);10.0~31Msym/s(8PSK) |
| Demodulation | DVB-S:QPSK; DVB-S2:QPSK /8PSK; DVB-T:QPSK/16QAM/64QAM; DVB-C:4QAM~256QAM |
| Follow the standard | DVB-S:EN300 421; DVB-S2:EN302 307 DVB-C:EN300 429; DVB-T:ETS 300 |
| LNB Power supply | DVB-S/S2:0V/+DC13V/18V,Imax=400mA |
| ASI interface | |
| Number of port | 2 ASI inputs, 2X2 ASI outputs |
| interface type | BNC |
| Impedance | 75Ω |
| Level range | 800mv±5% |
| Physical bandwidth | 108Mbps |
| Packet format | 188/204 byte |
| Network management interface | |
| Number of port | 1 |
| Electrical standards | 100BAS-T |
| interface type | RJ45 |
| IP output | |
| Number of port | 1 |
| Electrical standards | 1000BASE-T |
| interface type | RJ45 |
| Physical bandwidth | 1000Mbps |
Ordering Information
| Part Number | Description |
| WDT-1208-S/S2 | Input frequency: 950 ~ 2150MHz. 6 RF input ports and 2 ASI input ports, support multiplexing, 2X2 ASI outputs, 1 Network management port. |
| WDT-1208-S/S2-IPA | Input frequency: 950 ~ 2150MHz. 6 RF input ports and 2 ASI input ports, support multiplexing, 2X2 ASI outputs, 1 Network management port, 10/100/1000Mbps auto-negotiation bitrates TS over IP output(option). IP module A: support 2*MPTS or 8*SPTS. |
| WDT-1208-S/S2-IPB | Input frequency: 950 ~ 2150MHz. 6 RF input ports and 2 ASI input ports, support multiplexing, 2X2 ASI outputs, 1 Network management port, 10/100/1000Mbps auto-negotiation bitrates TS over IP output(option). IP module B: support 2*MTPS or 32*SPTS. |
| WDT-1208-T/T2 | Input frequency: 60~900MHz. 6 RF input ports and 2 ASI input ports, support multiplexing, 2X2 ASI outputs, 1 Network management port. |
| WDT-1208-T/T2-IPA | Input frequency: 60~900MHz. 6 RF input ports and 2 ASI input ports, support multiplexing, 2X2 ASI outputs, 1 Network management port, 10/100/1000Mbps auto-negotiation bitrates TS over IP output(option). IP module A: support 2*MPTS or 8*SPTS. |
| WDT-1208-T/T2-IPB | Input frequency: 60~900MHz. 6 RF input ports and 2 ASI input ports, support multiplexing, 2X2 ASI outputs, 1 Network management port, 10/100/1000Mbps auto-negotiation bitrates TS over IP output(option). IP module B: support 2*MTPS or 32*SPTS. |
| WDT-1208-C | Input frequency: 50~860MHz. 6 RF input ports and 2 ASI input ports, support multiplexing, 2X2 ASI outputs, 1 Network management port. |
| WDT-1208-C-IPA | Input frequency: 50~860MHz. 6 RF input ports and 2 ASI input ports, support multiplexing, 2X2 ASI outputs, 1 Network management port, 10/100/1000Mbps auto-negotiation bitrates TS over IP output(option). IP module A: support 2*MPTS or 8*SPTS. |
| WDT-1208-C-IPB | Input frequency: 50~860MHz. 6 RF input ports and 2 ASI input ports, support multiplexing, 2X2 ASI outputs, 1 Network management port, 10/100/1000Mbps auto-negotiation bitrates TS over IP output(option). IP module B: support 2*MTPS or 32*SPTS. |
Process
Company Profile
contact us
