Digital Water Bath Heater Lab Thermostatic Water Bath for Laboratory 800W 12L

• [PRECISE CONTROL]:This Vacuum drying oven uses microcomputer and PID cutting-edge technology to control temperature and oscillation frequency, with timing function, which meets the requirement of accurate experiment.
• [SWEET DESIGN]: Adjustable circulating fan speed and temperature setting, with independent limit temperature alarm system, clear obstacles you may encounter during the experiment.
• [IMPORTANT PARAMETERS]: Speed range 50-300rpm; temperature setting range 5-60ºC(41~140 °F); timing range 1min -99h59min; amplitude 20mm (Circumferential rotation).

• High-quality 304 stainless steel Laboratory Vacuum drying oven machine.With high capacity chamber for long-lasting durability, the compact design ensures efficient use of space.
• Featuring double temperature and double pressure settings at 121ºC/0.12Mpa and 134ºC/0.22Mpa, this 1000W high-power machine delivers top-notch efficiency. Plus, the intelligent chip temperature control ensures smart operation.
• Prioritizing your safety, our Laboratory biological Vacuum drying oven automatically cuts off the power supply in case of internal temperature overheating. The safety valve adjusts the internal pressure, and if it exceeds the standard value, it will automatically vent.
• The steam equipment has the function of pressure adjustment: adjust the inter pressure, if over standard value automatic vent. The autoclave machine has the function of avoild overheat protect device: when inter temperature overheat, power break electric current automatically.

The production of the lautoclave sterillization machine introduce
1.Start by the blanking process for the metal part

Normally the house of the autoclave sterillization machine medical was made by the steel or stainless steel of type as 316
The part was beginning as the blanking
1.Laser blanking machine capacity :8000*2000*10mm 
2.We had about 15 pcs of the laser cutting machine in blanking workshop ,name from No1 to No 15,
3.6S fully carry out in our workshop according to the iso13485,
4.All of the raw material can be Traceability

The press brake machine is a powerhouse in the metal fabrication industry, providing an efficient and successful method to bend sheet metal into different forms
To form the metal part into the shape we need ,the first part was by the bending press and the bending die

 

Stainless Steel :Provides great strength and resistance to corrosion, but its greater spring back the ability to revert to its original shape after bending means that it must be handled carefully. 

 

High Temperature Autoclave Machine need the bracket for the motor and metal stamping part for the housing and electric connect part,The progressive die stamping can give out the huge volume and low cost for the Surgical Instruments Autoclave Steam Stainless Steel Sterilization Machine Lab Equipment machine spare metal part.

The Medical Sterilization machine need a lot of welding ,to imporve the capacity and welding quality we introduce the welding robot machine instead of labor human welding
1.QTY of the welding robot :23pcs
2.Capacity of the welding robot :500A
3.Work station:2000*1500mm

Plastic part was one part of the  Horizontal Universal Drying Oven 
We had about 10 sets of the plastic injection work for the Lab Universal Drying Oven
1.The capacity for plastic injection machine was :1000*850*750mm
2.The max ton for plastic injection machine was 1000T

The 6S was fully carry out in our warehouse with the ERP system 
1.We need to know how many part in our warehouse
2.We need to anticipate the part when to full fill in for all the benchtop Autoclave with Drying Function Water Storage Tank 

The rotor was the key part for the Universal Drying Oven ,to make it perfect especial for the Universal Drying Oven Equipment ,we need to control the tolerance of the rotor very tight,that was why we introduce the High Temperature Universal Drying Oven
1.CNC QTY:15PCS
2.Tolerance for CNC machine :0.01mm

All  Multifunction Steam Sterilization Machine need to be test before transfer it to the warehouse.

Customer review our Laboratory Universal Drying OvenMachine workshop,We were welcome all of our customer to visit our company to review and test theUniversal Drying Oven for Organisms, Medical, Chemistry,Our business vision was :long term business ,win-win for the future

Warehouse and stroage for the medical Medical Sterilization Machine,the temperature should be control within 18-25° for all equipment and test machine ,all the record can trace within 3 years.
 

The maintain and repair guarantee for the Medical Sterilization Machine workshop was the key to the business ,when a customer bought a machine from us ,the guarantee was the most importance things customer concern.we sent out technical service team to oversea customer site for the maintain and repair for our customer .Our service for the lab equipment was not stop after the Vacuum Steam Machine Machine sold ,it was the start for our company and your company for win win situation .You use the Vacuum Steam Machine Machine we take care of the rest.

We take part into the MedtecChina Canton Fair (The China Import and Export Fair) exhibition every year ,hope one day we can meet each on the fair

The supplier and the customer was togeher for the future ,both parties should be in win-win situation ,so we were looking forwarder to hold hand by hand for bright future.