Audited Supplier
Note: This is a complete set, including welding power supply and welding torch.
iOrbital 5000 welding power supply is designed and manufactured by Huaheng Company with the world's advanced technology. This power supply adopts an integrated design: control system, main power supply system and circulating cooling system. The main power supply and control system integrates decades of technology, development and manufacturing experience of Huaheng Company, and has progressiveness, digital, easy to operate, intelligent universality, reliability and other characteristics. This power supply is specially designed and manufactured for tube/plate welding. It is mainly used for welding and repairing various heat exchanger tubes/plates in petrochemical industry.
TOA series welding head is special designed for tube to tube TIG welding,suitable for carbon steel,stainless steel tube to tube butt joint.lt's fit for fusion welding or wire feeding with external TB1501 integrated wire feeder with AVC&OSC function.lt is compatible with iOrbital5000 programmable toachieve accurate orbital TIG welding for tube/tubewelding with high repeatability.lt mainly applied inchemical,food,medicine,engineering installation,boiler,nuclear and so on.
| iOrbital 5000 Power Source | |
| Power Type: | Inverter |
| Welding current: | 5~500A |
| No-load voltage: | 72V |
| Input voltage: | 380V±15% 50Hz |
| Water-cooling: | Built-in circulating water tank |
| Power: | 15KVA |
| Control function: | Gas/Current /Rotation/ Wire feeding/Arc length tracking |
| Display: | 10.4-inch industrial touch screen |
| Program storage: | 999 |
| Section: | 20 |
| Insulation/protection class: | H/IP23 |
| Print: | Integrated printer |
| Overall dimension (mm): | 1081x455x990 |
| Manufacturing standard: | GB15579-1995,IEC60974 |
| Temporary load rate(20°C): | 500A 60%/ 387A 100% |
| TOA Series TIG Welding Head | |||||
| TOA77 | TOA130 | TOA180 | TOA230 | TOA320 | |
| Weldable pipe diameter(mm) | Inner clamp:Φ19.05~Φ45 (3/4″~13/4″) | Inner clamp:Φ38.1~Φ76 (1 1/2″~3″) | Inner clamp:Φ50.8~Φ114.3 (2″~4 1/2″) | Inner clamp:Φ120~Φ178 (4 1/2″~7") | Inner clamp:Φ150~Φ230 (6″~9″) |
| Outer Clamp:Φ45~Φ77 (1 3/4″~3″) | Outer Clamp:Φ76~Φ130 (3″~5″) | Outer Clamp:Φ114.3~Φ180 (4 1/2″~7″) | Outer Clamp:Φ178~Φ230 (7″~9″) | Outer Clamp:Φ230~Φ324 (9″~12 3/4″) | |
| Tungsten electrode diameter(mm) | Φ2.4,Φ3.2 | Φ2.4,Φ3.2 | Φ2.4,Φ3.2 | Φ2.4,Φ3.2 | Φ2.4,Φ3.2 |
| Spinning speed(rpm) | 0.19~3.8 | 0.11~2.2 | 0.09~1.8 | 0.05~1.0 | 0.026~0.52 |
| Yaw width(mm) | 20 | 40 | 40 | 40 | 40 |
| Arc length height(mm) | 40 | 40 | 40 | 40 | 40 |
| Maximum wire feed speed (mm/min) | 1800 | 1800 | 1800 | 1800 | 1800 |
| Main dimensions(mm) |  | ||||
| A | 220 | 300 | 375 | 425 | 550 |
| B | 180 | 235 | 285 | 300 | 315 |
| C | 112~132 | 156~196 | 184~224 | 195~235 | 230~270 |
| D | 92 | 165 | 225 | 250 | 297 |
| E | 82 | 132 | 182 | 232 | 328 |
| F | 320 | 400 | 525 | 570 | 680 |
| wight (kg) | 5.5 (without cable) | 10.8 (without cable) | 19.5 (without cable) | 21.5 (without cable) | 36 (without cable) |
| Dimensions(mm) | 370×220×320 | 435×300×400 | 445×375×525 | 465×425×570 | 430×610×680 |
| Welding Torch Spring Balancer | |
| Load(kg) | 9~15 |
| Journey(mm) | 2000 |
| Weight (kg) | 3.8 |
 | iOrbital 5000 Power Source 1. Controlling interface including: WORK, PROGRAM, CONFIGURATION, FILE, LIBIARY, HELP; 2. Auto- generate the welding parameter for tube/ tube-sheet, and thin wall tube-tube welding; 3. Intelligent AVC function and carry out mechanism; 4. Real time detect and feedback of error like arcing fail, short circuit, over heat, over voltage, lack of gas, lack of water, lower voltage, arc extinguish, communication error etc; 5. Import/export welding program by USB driver, easy to switch between different programs; 6. Memory of the program editing while welding, and display the difference to original program; 7. Parameter like weaving speed/center/width, current, and rotation speed can be adjusted while welding to achieve special requirement of some welding seam; 8. Online and USB driver upgrade function and offline program function. |
 | TOA Series TIG Welding Head 1. Intelligent programming, database management; 2. AVC (arc voltage control) and OSC (auto-oscillation); 3. One side welding both sides formation to get uniform welding shape; 4. Welding procedure parameter management, store, copy and print. |
 | Welding Torch Spring Balancer 1. It is convenient and fast to move; 2. The load is adjustable to achieve the best operating state; |
Tube iOrbital 5000 welding power source and TOA welding torch head are usually packed in aluminum box with sponge, then will put aluminum box in wooden case for air and sea shipping. 
