IP Unknown

MadeInChina.com > Industrial Equipment & Components > Valve > Pressure Reducing Valve

Direct Acting Bellows Pressure Reducing Valve (GABRV2S)

Price	$1.00 Compare
Min Order	1 Piece
Shipping From	Zhejiang, China
Popularity	374 people viewed
Quantity	+-

Goole Valve technology Co., Ltd.

Audited Supplier 10 years

Profile Certified by SGS/BV

Zhejiang, China
Cindy (Ms.)
Sales Executive

Visit Homepage Product Catalog

Product Detail

Model NO.:

GABRV2S

Certification:

ISO

Temperature:

Ordinary Temperature

Connection:

Flange/Thread

Valve Seat:

Single-Seat

Structure:

Bellows

Material:

C.S

Size:

1"-2"

Category:

Pressure Reducing Valve

Connecting Type:

Threaded

Medium:

Steam., etc

Working Temperature:

Below 250 Deg C

Usage:

Pressure Reducing

Application:

Steam System and Air Compressor System

Trademark:

GOOLE, OEM

Transport Package:

Carton, Plywood Case

Specification:

ISO 9001

Origin:

China(Mainland)

HS Code:

8481804090

Product Description

Direct Acting Bellows Pressure Reducing Valve (GABRV2S)

Brief Introduction.

This pressure reducing valve is robust direct acting bellows pressure reducing valve designed for use on steam,air and inert industrial type gases.The valve is available in four nominal sizes:DN25,DN32 ,DN40 and DN50. Set the outlet pressure through adjusting spring, the opening of valve flap enlarged when the outlet pressure reduced, the opening of valve flap decreased when the outlet pressure reached to the set pressure. The valve pressure of the medium acts on the area of corrugated tube and transduce to adjusting spring, realizing the function of pressure reducing and regulating.

This reducing valve is designed in meet of the need of energy saving. It has the characteristics of multi-function and light. You can adjust the pressure by rotating the plastic hand wheel, no need to use tool, the connection and installation is very convenient. The internal structure use corrugated tube, the sealing face has filtering mesh protecting device, which protect the internal parts from damage, and greatly prolong the service life.

Working Principle

In operation the valve will modulate as a result of a downstream pressure signal fed through the sensing orifice in the valve stem . This pressure acts on the control bellows generating a force which is balanced by the compressed control spring.The internal forces generated as a result of both upstream and downstream pressures acting on the area of the valve head are minimized by use of a balancing bellows . A graphite reinforced PTFE bush incorporated in both the pushrod/balancing bellows assembly and bottom cap assembly provides two point guiding.

Note:
The maximum upstream pressure is 10 bar and it is recommended that the pressure turn down is limited to about 10:1.
BRV71 Screwed NPT Connections
BRV73 Flanged PN16,ANSI 150 or JIS 10 Connections.

Field of Application.

Product Name: BRV71/73 Direct Acting Bellows Pressure Reducing Valve.
Pressure Rating: 1.6- 2.5 Mpa.
Nominal Diameter: DN25-50 mm.
Body Material: Steel, CF8.
Standard Flanges: DIN, ANSI, JIS.
Standard Screwed: NPT,BSP.
Spring Range:0.14~1.7 bar g,1.4~4.0 bar g,3.5~9.0 bar g.

Material of Main Component.

Name of Component	Material of Component
ValveBody, Bottom Cover, Valve Cover	Cast Steel / CF8
Valve Flap,Valve Rod,Valve Seat	CF8
Bellows	1Cr18Ni9Ti
Hand wheel	Heat-resistant Plastic
Spring of Main Valve	50CrVA
Adjusting Spring	60Si2Mn

Main External Dimensions.

DN	G	A	A1
DN25	1	134	174
DN32	1 1/4	134	179
DN40	1 1/2	134	186
DN50	2	134	186

Main Technical Parameters and Indexes of Performance.

Nominal Pressure	PN1.6 Mpa
Tested Pressure of Shell	2.4 Mpa
Sealing Test Pressure	1.76 Mpa
Maximum Upstream Pressure	1.0 Mpa
Maximum Downstream Pressure	0.9 Mpa
Pressure Range of Outlet	0.014-0.9 Mpa
Medium	Water, steam, liquid, air, oxygen, nitrogen, etc.
Operating Temperature	210

Message Type
* Message Content
* Name
* Phone
* Email
* CAPTCHA