Audited Supplier
RO edi system DI deionized water system DM water system
Please Attention
Different user have difference output ro di water DM water system quality requirement?
| Tips: one gallon=3.785 liters, 1m3=1ton=1000 liters, GPS,GPM When designing, we ultimately select based on the hourly water output flow rate. | ||||||
| Different Water TDS(Total Dissolved Solids) compare and usage | ||||||
| Raw water/Application | Bottled water, | City tap water | Softener water | Industry use (1st level) | Industry use (2nd level) | Industry use (3rd level) |
| Bag water | ||||||
| TDS Range | 2-10ppm | 100-1000ppm | 0.03mmol | Conductivity Range: 1--0.1 μS/cm | Resitivity Range: 1----10MΩ/cm | Resitivity Range: 10----15MΩ/cm Or more higher: 18 MΩ/cm |
| Direct Drinking | Yes | Yes/No | ||||
| Cooking, human | Yes | Yes | ||||
| consumption, washing | ||||||
| Irrigation, Industry, | Yes | Yes | ||||
| Animal Drinking | ||||||
| For inudustry use: Condutivity beteen range 1-0.15us/cm or Resitivity 10-18 megohm. Different industry have different water quality requriement. | ||||||
| 1..Electricity supply:220V-480v, 50hz or 60hz,3 phases 2.Capacity: 500L/H to 50m3/hr. 20ft or 40ft containerized 3.Membranes :DOW(Dupont) or Toray or Vontron 4.UV sterilizer/Ozone generator, CIP washing system, anti-scale dosing system is for optional | ||||||
And the process also is difference.
1. Source water tank →Pretreatment parts→ Single RO system→ RO tank→EDI system →DI water system→10MΩ/cm outlet water.
2.Source water tank →Pretreatment parts→ Single RO system→ RO tank→Mixed bed →DI water system→10MΩ/cm outlet water.
3.Source water tank →Pretreatment parts→ doulbe RO system→Double RO tank→EDI system →DI water system→15MΩ/cm outlet water
4.Source water tank →Pretreatment parts→ doulbe RO system→Double RO tank→EDI system →Polish resin filter→ 18 MΩ/cm outlet water
5.Source water tank →Pretreatment parts→ cation resin →anion resin →Middle tank→Mixed bed →DI water→15MΩ/cm outlet water
For DM water output water quality.
1. Conductivity : 1us/cm.
2. Conductivity : 0.1us/cm
3. Resitivity:15MΩ/cm or 18 MΩ/cm
DM water system 25m3/hr pre-filters+ro+mix bed for industrial use
20L to 50L/hr Laboratory ultrapure water purification system DI water unit
DM/DI water output water quality have below differnece process and flow chart(based on user choose suitbae process)
RO+EDI Process (50m3/hr) Sand+carbon+2 pass ro+edi process
1000L/hr RO+EDI Photo (1 pass ro+edi)
50m3/hr Demineralized water system (Adopt Pre-filters→ cation resin →anion resin) Carbon steel material
30m3/hr DM water system (Adopt Pre-filters→ cation resin →anion resin) FRP vessel material
50m3/hr Deionzied water system (Adopt Pre-filters→ ro+mixed bed process) carbon steel vessel material
Advantages:
· Consistent high-purity water
· Can handle high variations in feedwater chemistry
· Proven, long operating history
· Most plant operating personnel are familiar with this process
Disadvantages: If use the mixed resin then need chemical
· Requires chemicals
· Chemical feed storage tanks required
· Neutralization process required
Deionized water system
| Model | Productivity | Motor power | Recovery rate | Outlet water conductivity(us/cm) | Raw water conductivity |
| HYRO-500L | 0.5T/H | 1.5kw | 50 | ≤0.1 | ≤300 |
| HYRO-100L | 1T/H | 2.2kw | 50 | ≤0.1 | ≤300 |
| HYRO-2000L | 2T/H | 3kw | 50-60 | ≤0.1 | ≤300 |
| HYRO-3000L | 3T/H | 4.5kw | 55-65 | ≤0.1 | ≤300 |
| HYRO-4000L | 4T/H | 6.5kw | 55-65 | ≤0.1 | ≤300 |
| HYRO-5000L | 5T/H | 8kw | 60-70 | ≤0.1 | ≤300 |
| HYRO-1000L | 10T/H | 15kw | 60-70 | ≤0.1 | ≤300 |
| HYRO-2000L | 20T/H | 22kw | 65-75 | ≤0.1 | ≤300 |
| HYRO-3000L | 30T/H | 26kw | 70-75 | ≤0.1 | ≤300 |
| HYRO-50000L | 50T/H | 55kw | 70-75 | ≤0.1 | ≤300 |
RO+EDI deionized water system
50m3/hr EDI system deionized water system 50m3/hr RO+EDI water system
RO+Mixed bed DI water system
DM Demineralized Water System
2 factories +300 workers+ Experienced engineeing team
- We are dedicated in water treatment since 2006
- Direct factory with mature supply chain to offer good price
- Export experience over 30 countries, familiar with customs issues
- Customized water treatment solution for varied industries
- ISO9001 quality certification & OEM service available
Contact Us now get more info.
Sherry
Product Manager
