Audited Supplier
General Description: The equipment consists of a pressing and forming part, a conveying part, and a control system.
Raw materials: formula raw materials are widely applicable, including fresh meat and meat meal, soybean meal, protein powder, grains, fiber, other micronutrients, etc.;
By adjusting the formula and the design of the mold, it is possible to produce various shapes of different hardness particles, rods, flakes, etc.
Application: Low-temperature cold pressed pet food
Capacity: 500 kg / h or less, 800 ~ 1200 kg / h, 1500 ~ 2500 kg / h, 2500 ~ 3000 kg /
1. It is composed of feeding roller, die roller and canvas drive rubber roller. Driven by three motors respectively, frequency conversion speed regulation.
2. The pressing of the rubber roller is automatically controlled by the motor, and the two sides of the demoulding pressure roller can be adjusted.
3. In the structure, there are mechanisms such as canvas rectifying and tensioning, faceting knife adjustment, canvas scraping and slag cleaning, feeding roller gap adjustment, and assisting disassembly and assembly of pressing rollers.
In the secondary canvas conveying place, there is a slag recycling device, which is clean and hygienic.
4. The whole equipment adopts frequency conversion speed regulation.
5. Change the mold to produce granular products of various shapes.
| Dryer |
| Capacity: Customized according to customer needs |
| Based on: 1) Inlet material moisture: 21%-28%; |
| 2) Outlet material moisture:5-8% |
| Including following parts: |
| 1) Feeding section; |
| 2)Discharging section; |
| 3)Drying section; |
| * The inner wall of the main unit is made of stainless steel, and the frame is made of carbon steel. |
| 4) Transportation mesh belt with Variable Speed Drive; |
| * Drying time: 15~60 minutes, mesh belt with chute type tensioning device |
| 5) Recycling Section; |
| * Contain 2 independent hot air circulation units, each unit is equipped with a centrifugal circulation fan |
| 6) Support Structures; |
| 7) Air Heating and Recycling System; |
| 8) Temperature sensor ; |
| 9) Steam valves |
(2) Concept: Modular function, humanized menu system, various applications are always our pursuit. LY cold extrusion machine for advanced design concepts can meet different requirements.
(3) Profession: We have a professional and manufacturing industry to ensure the precision and coordination of each component of the extruder, while maintaining stable processing and low noise.
(4) Precision: Precise food manufacturing technology and material selection that ensure cable life is superior to extruder products, to minimize screw and barrel wear.
(5) Experience: More than twenty years of experience in domestic and international advanced double screw extruder. We produce various kinds of food extrusion, such as vegetable protein, cereal flakes / breakfast cereals, pellets, feed / animal feed, etc., enough to solve the problems met during production.
Our Company
(2) Achieved equipment independent design and production, obtained a number of patents, successfully realized the grains products Extension and promotion of nutrition, rice, breakfast cereals, kinds of fried, non-fried snack foods, high molecular tissue proteins, brush tissue protein, instant porridge, instant rice and other fields.
requirement of our customers, and to propose, plan, design and project food plants to suit your budget and specific production needs.
Q: What kinds of products can be made?
A: corn flakes, puffs, breakfast cereals food, animal feed, animal feed, soy protein texture food.
Q: What's the delivery time?
A: We usually need 40-45 days for large sizes, depends on the finished product, so machine wash-change.
Q: What about the installation service?
A: Depending on the whole line of equipment price list, it usually takes 2-3 weeks. We will provide you with installation instructions, such as start, as well as their operation machines for quality control, testing of different recipes.
Q: What is the warranty period for using the device?
A: 1 year for auger and cylinder due to modular design, changing the wearing parts will be OK, unlike a full set of screws, no need to change the whole set.
