Double Pins Potentiometer B50K B503 50K Handle Length 20mm Rotary Potentiometer

Price Negotiable Compare
Min Order 500 Pieces
Shipping From Guangdong, China
Popularity 221 people viewed
Quantity
+-
 

FF TEK CO., LIMITED

VIP   Audited Supplier 5 years
Profile Certified by SGS/BV
FF-R24NS-DR2
Fixed Resistor
Protective Resistor
DIP Resistor
Metal Film Resistor
Throught Hole
Varistor
Duplex
Square
Log Scale
Medical Apparatus and Instruments
None
FF
Reel
Rotary type
Shenzhen
8451900000
Product Description

 

Product Parameters

 
Electrical Characteristics
Total Resistance1KΩ~1MΩ
Resistance Tolerance500Ω<R<1MΩ:±20% R<=500Ω or R>=1MΩ:±30
Resistance TaperA.B.C
Max. Operating VoltageAC 50V, DC 10V
Rated Power0.05W
Insulation ResistanceLess than 100MΩ at DC 250V
Withstand Voltage1 minute at AC 300V
Residual Resistance50Ω Max
Gang Error (Dual Unit or Multi-unit)-40db~Odb±3db
Mechanical characteristics
Detent1(Center) detent, 11 detents
Total Rotational Angle300°±10°
Push-Pull StrengthPull: 10Kgf Min; Push: 10Kgf Min at 10sec
Rotational Torque20-200gf.cm
Stopper Strength3.0Kgf.cm Min
Shaft Wobble0.5mm Max
Detent Torque20 ~ 250gf.cm
Bushing nut tighten Strength10.0Kgf.cm
Durability
Rotational LifeStandard life: 30,000 Cycles Min.; Long life: 100,000 Cycles Min.
Cold Test-20±2°C for 96 hours. △TR< ±15% 
Dry Heat70±2°C for 96 hours. △TR< ±15% 
Temperature Cycle20~+70°C, 5 cycles. △TR< ±15% 
Soldering ConditionSolder dip: 260±5°C 5 Sec; Manual Soldering: 350°C±10°C 3 sec
Switch Characteristics
Rated Power3.0A at DC 16V
Contact ResistanceLess than 50mΩ
Switch Angle30°±10°
Switch Torque50~250gf.cm
Switch Life25,000 cycles at without load
 

Product Description

 

1.Flux builded-up prevention is taken through inserting molding around the resistorwith resin.

2.A large variety of products lined up to support various applications.

3.Dual Shaft and miniature design for audio applications.

4.Long Life Type Available.

Product Series

Product Application

 

Certifications

 

Packaging & Shipping

 

 

Company Profile

 

 
 
 

FAQ

Q: Where Can we get the datasheets of the products?
A: Each product has the specification, Please contact with our sales if you need

Q: Can we get the samples before placing the order?
A: Yes. we can send you some free samples for your test before your order.

Q: How long is the lead time?
A: Normally we keep stock for most products, the lead time is 5~7 days as soon as the payment is released.
For customized products, it takes longer.


Q: How about the after-sale service?  
A:We offer 12 months for every products we sold. If you meet any problems after sales, Pls contact us freely,we'll help solving the problems within 24 hours.

Q:  What's the payment terms? 
A: Normally we accept TT and Paypal. L/C is also accepted if the order quantity is large. For old customers, we'll guanartee monthly payment after good cooperationship.

Q: How about your quality control?
A: All the products will be 100% checked before the shipment. 

Q: Does your company accept small order?
A: Yes, we accept small trial order.

Q: Do you support customization?
A: We support the OEM&ODM service.

 
 
Message Type
* Message Content
* Name  
* Phone
* Email
* CAPTCHA