Audited Supplier
Brass Foot/check valve are installed on the bottom of suction tubes in the fuel storage tank to maintain prime in suction system fuel lines. Double-poppet models provide redundant protection for holding the prime, and are ideal for installations where the valve is not easily accessible. Brass check valve prevent the liquid backflow. It is suitable for oil machine. When install it,Remove the plastic cover, clean it ,and tight the components and install the filter net to keep from the dirt. The body and the petal have been precision treatment.
Technical Specification/ Packaging detailed:
Advantages
1. in case of overflow when transfering oil
2. easy connecting, good quality seal
Technical Specification
Product Name: Fuel Dispenser Brass Bottom Valve /Check Valve/Foot valve
Material: Body and Poppet Brass
Thread: BSPT/NPT/BSP
Size: DN 20/ DN 25/ DN 40/ DN 50-- 1" 1.5" 2" 2.5" 3" 4"
Working Pressure: 1MPa
Closing Speed: 0.5S
Temperature Range: -33°C ~ +55°C
Medium: Gasoline,kerosene,diesel,water,etc
Body Length | 510mm |
Upper Drop size | DN 100mm |
upper coupling | male coupling |
Spill Container For Gas Station
Spill Container is to collect the leakage fuel when rhe tanker is loading .the cover is carbon steel material ,the body is toughness .the body is installed in the sand which can efficiently protect the outside influence to avoid the leakage of the container .Unique and reasonable design to make it afford the weight of the tanker driving on it .there is a drain valve ,when pull this valve ,it will release the inside fuel go back to the underground tanker .
Technical Information
| Type | Spill Container For Gas Station |
| Size | 4 " |
| Material | Plastic + Carbon Steel |
| Pressure | 0.6Mpa |
| Open Mode | Manual |
Features
Spout retaining ring - adds extra measure in securing nozzle spout in fill pipe
Helps reduce spills - a unique two-stage lever design assures a positive shut-off, even if held wide open
Design Working Pressure - products are designed to work at 50 PSI maximum pressure
Easily replaced spout - simply remove three screws. Replacement kits are readily available from
Dash-pot action - for smoother closing action and reduced line shock
Dual poppets - easy to open nozzle against high pressure
FlowLock™ - designed to shut-off automatically when the spout is tipped up, limiting spillage
Low reliable shut-off - specially designed to ensure proper shut-off as low as 5 gallons per minute
Even, smooth spray pattern - minimizes diesel foaming and false shut-offs
