Audited Supplier
FD-6BL
12months
12months
Surface Grinding Machine
Flat Workpieces
Grinding Wheel
PLC
Semiautomatic
Surface Grinding Machine
High Precision
ISO 9001
New
Electricity
Grinding Disc
with Variable Speed
Grinding Industry
Double Grinding
Oversea Setup & After-Sale Avalaible
Double Plate
3-5
Pneumatic
Metal and Non-Metal
Lapping Slurry
PONDA
Wood Crate
700× 950× 1950mm
China
Product Description
Why Ponda?
Ponda has profound experience of lapping, polishing and thinning. We heretofore supplied more than 60, 000 lapping process solutions and appliances over the industries of machinery, electronic, aerospace, aviation, automotive, atomic energy, optics; the substances of metal, wafer substrate, ceramics, glass, industrial sapphire, plastics, and any other composites.
Main uses:
This machine is mainly used for grinding or polishing silicon wafer, quartz wafer, optical crystal, glass, sapphire on both sides.
Products Show
7. Diamond dressing wheel can be used to repair the disc.
8. The large size design of the drive shaft enhances the rigidity of the shaft, thereby eliminating the jitter caused by insufficient rigidity.
SPECIFICATION
Picture of double-sided grinder
SAMPLE DEMONSTRATION (DOUBLE PLATE)
Production and assembly shopDelivery & Packing
Packing Details : Packing, 1 pcs/Wooden box.
FAQs
Q1: Which machine is most applicable for my product?
A: It usually depends on 5 requirements and parameters of your product: flatness, roughness, thickness, dimension, productivity:
1. If better flatness and roughness were required, you might need both lapping and polishing machine.
2. If to thin the product in a big margin, such as 500μm, you might need a thinner machine for extra.
3. If the productivity were excessive, you might need larger machine or to expand production line.
Additionally, we can confirm the production line as we make samples for you.
Q2: Does Ponda charge for making samples?
A: No, it's free to make samples.
Q3: Is Ponda trader or manufacturer?
A: We are manufacturer, certified National High-Tech Enterprise.
Q4: How long does it take machine to deliver?
A: Approximately 15 days to deliver. If the machine are out of stock, we need 15 days more to manufacture.
Q5: Does Ponda provide oversea setup and after-sale service?
A: Yes, we provide oversea service and online tutorial.
Q6: How many type of machine does Ponda manufacture?
A: We have 21 major series of machines, 5 different types run in different principles, more than 15 types of plates, 100 types of slurries.
Ponda has profound experience of lapping, polishing and thinning. We heretofore supplied more than 60, 000 lapping process solutions and appliances over the industries of machinery, electronic, aerospace, aviation, automotive, atomic energy, optics; the substances of metal, wafer substrate, ceramics, glass, industrial sapphire, plastics, and any other composites.
Main uses:
This machine is mainly used for grinding or polishing silicon wafer, quartz wafer, optical crystal, glass, sapphire on both sides.
Products Show
Main features of double-sided machine:
1, the use of AC inverter motor drive, soft start, soft stop, stable and reliable.
2, grinding machine adopts four stages of pressure, that is, light pressure, medium pressure, heavy pressure, repair operation process
3, the column grinding machine adopts torsion operation, frequency conversion speed regulation, the motor speed and running time can be directly input on the control panel.
4, oil pressure lifting gear ring [Microsoft user 1], very stable.
5, the upper plate is separately set with a slow drop cylinder, not only effectively prevent the fragile workpiece from breaking, but also independent pressure control.
6, through the use of electronic preset counter, the number of grinding cycles, requirements can be accurately controlled.
1, the use of AC inverter motor drive, soft start, soft stop, stable and reliable.
2, grinding machine adopts four stages of pressure, that is, light pressure, medium pressure, heavy pressure, repair operation process
3, the column grinding machine adopts torsion operation, frequency conversion speed regulation, the motor speed and running time can be directly input on the control panel.
4, oil pressure lifting gear ring [Microsoft user 1], very stable.
5, the upper plate is separately set with a slow drop cylinder, not only effectively prevent the fragile workpiece from breaking, but also independent pressure control.
6, through the use of electronic preset counter, the number of grinding cycles, requirements can be accurately controlled.
8. The large size design of the drive shaft enhances the rigidity of the shaft, thereby eliminating the jitter caused by insufficient rigidity.
SPECIFICATION
| Standard Specification | |||||
| Machine Model | FD6B | FD9B | FD13-6B | ||
| Lower Plate Diameter | Φ386 mm / 15 inches | Φ640 mm / 25 inches | Φ973 mm / 38 inches | ||
| Upper Plate Diameter | Φ386 mm / 15 inches | Φ640 mm / 25 inches | Φ973 mm / 38 inches | ||
| Star Wheel Parameter | DP 12, Z=66, A=20° | DP 12, Z=108, A=20° | DP 19.3, Z=152, A=20° | ||
| Conditioning Ring Parameter | DP 12, Z=66, A=20° | DP 12, Z=108, A=20° | DP 19.3, Z=152, A=20° | ||
| Max. Workpiece Diameter | Φ120 mm | Φ180 mm | Φ290 mm | ||
| Process Thickness | 0.2mm≤N≤20mm | 0.2mm≤N≤25mm | 0.2mm≤N≤30mm | ||
| Number of Station | 3≤N≤5 | 3≤N≤5 | 3≤N≤5 | ||
| Plate Rotate Speed | 0-60 rpm | 0-60 rpm | 0-50 rpm | ||
| Total Weight | 600 kg | 2000 kg | 3200 kg | ||
| Total Floor Space | 700×950 mm | 1350x960 mm | 1700×1380 mm | ||
| Built-In Optional Kits | |||||
| Grade | Standard | Advanced | |||
| Slurry Supply System | - | Integrated with PLC | |||
| Facing and Grooving System | - | Integrated with PLC | |||
| Machine Enclosure | - | Framed by Metal Plate | |||
| *NOTE: the optional kits based on the production requirements, making samples can confirm if they are necessary. | |||||
Picture of double-sided grinder
SAMPLE DEMONSTRATION (DOUBLE PLATE)
About the Company
We have a production workshop and testing equipment, assembly workers and mechanical design engineers
45 people
45 people
Packing Details : Packing, 1 pcs/Wooden box.
FAQs
Q1: Which machine is most applicable for my product?
A: It usually depends on 5 requirements and parameters of your product: flatness, roughness, thickness, dimension, productivity:
1. If better flatness and roughness were required, you might need both lapping and polishing machine.
2. If to thin the product in a big margin, such as 500μm, you might need a thinner machine for extra.
3. If the productivity were excessive, you might need larger machine or to expand production line.
Additionally, we can confirm the production line as we make samples for you.
Q2: Does Ponda charge for making samples?
A: No, it's free to make samples.
Q3: Is Ponda trader or manufacturer?
A: We are manufacturer, certified National High-Tech Enterprise.
Q4: How long does it take machine to deliver?
A: Approximately 15 days to deliver. If the machine are out of stock, we need 15 days more to manufacture.
Q5: Does Ponda provide oversea setup and after-sale service?
A: Yes, we provide oversea service and online tutorial.
Q6: How many type of machine does Ponda manufacture?
A: We have 21 major series of machines, 5 different types run in different principles, more than 15 types of plates, 100 types of slurries.
