Audited Supplier
Model: TC205
System available: FANUC, SIEMENS, MITSUBISHI, SYNTEC, HCN etc.
Double spindle
5-axis function
Max machining diameter: 20mm
Motorized spindle
Features
*Each axis equipped with imported high-precision linear guide,ball screws and precise bearings.
* Using synchronous guide bush structure,realize high-speed and high-precision machining.
* With guide bush or without guide bush switching flexiblely to meet different needs of processing.
* Key components with gas sealing structure, oil and slag prevention, improving service life and stability.
* Select high torque motor, high rigidity and high strength slipway for each axis and tool holder to meet the requirements of large cutting volume and high efficiency.
* High scalability, tool quantities matched with different requirements of processing, reaching great cost-effective.
Layout
| Model | TC205-1 | TC205-2 | TC205-3 | TC205-4 | ||
| 5-axis,dual spindle | 5-axis,dual spindle | 5-axis,dual spindle | 5-axis,dual spindle | |||
| NC system | SYNTEC 220TB | SYNTEC 220TB | SYNTEC 220TB | SYNTEC 220TB | ||
| Lathe rated power | kw | 15 | 15 | 15 | 15 | |
| Machining range | ||||||
| Maximum machining diameter | mm | φ20 | φ20 | φ20 | φ20 | |
| Maximum machining length (one-time clamping)With guide bush | mm | 230 | 230 | 230 | 230 | |
| Maximum machining length (one-timeclamping)Non guide bush | mm | 2D | 2D | 2D | 2D | |
| Main spindle power | kw | 2.2/3.7 | 2.2/3.7 | 2.2/3.7 | 2.2/3.7 | |
| Sub spindle power | kw | 2.2/3.7 | 2.2/3.7 | 2.2/3.7 | 2.2/3.7 | |
| Main spindle max through hole dia | mm | φ27 | φ27 | φ27 | φ27 | |
| Main/sub spindle rev speed | rpm | 10000/10000 | 10000/10000 | 10000/10000 | 10000/10000 | |
| Sub spindle max clamping dia | mm | φ20 | φ20 | φ20 | φ20 | |
| Sub spindle max through hole dia | mm | φ27 | φ27 | φ27 | φ27 | |
| Max tool installed qty | 18 | 20 | 21 | 23 | ||
| OD Turning tool | ||||||
| Qty x Model | mm | 6*#12 | 6*#12 | 6*#12 | 6*#12 | |
| Cross live tool | ||||||
| Cross live tool | mm | 4*ER16 | 4*ER16 | 4*ER16 | 4*ER16 | |
| Drilling dia | mm | φ10 | φ10 | φ10 | φ10 | |
| Tapping/Threading die dia | mm | M6 | M6 | M6 | M6 | |
| Live tool rev speed | rpm | 5500 | 5500 | 5500 | 5500 | |
| Live tool power | kw | 1 | 1 | 1 | 1 | |
| End -face tool (Mainspindle) | ||||||
| Fixed | Qty x Model | mm | 4*ER16 | 4*ER16 | 4*ER16 | 4*ER16 |
| Drilling dia | mm | φ10 | φ10 | φ10 | φ10 | |
| Tapping/Threading die dia | mm | M8 | M8 | M8 | M8 | |
| Live | Qty x Model | mm | -- | -- | 3*ER16 | 3*ER16 |
| Drilling dia | mm | -- | -- | φ10 | φ10 | |
| Tapping/Threading die dia | -- | -- | M6 | M6 | ||
| Live tool rev speed | mm | -- | -- | 5500 | 5500 | |
| Live tool power | kw | -- | -- | 0.75 | 0.75 | |
| Back end-face tool(Sub spindle) | ||||||
| Fixed | Qty x Model | mm | 4*ER16 | 4*ER16 | 4*ER16 | 4*ER16 |
| Drilling dia | mm | φ10 | φ10 | φ10 | φ10 | |
| Tapping/Threading die dia | mm | M8 | M8 | M8 | M8 | |
| End face live tool | mm | -- | 2*ER16 | -- | 2*ER16 | |
| Side- Live tool | mm | -- | -- | -- | -- | |
| Drilling dia | mm | -- | φ10 | -- | φ10 | |
| Tapping/Threading die dia | mm | -- | M6 | -- | M6 | |
| Live tool rev speed | mm | -- | 5500 | -- | 5500 | |
| Live tool power | kw | -- | 1 | -- | 1 | |
| Rapid feed speed | m/min | 18(X1)24(X2/Y1/Z1/Z2) | 18(X1)24(X2/Y1/Z1/Z2) | 18(X1)24(X2/Y1/Z1/Z2) | 18(X1)24(X2/Y1/Z1/Z2) | |
| Feed motor power | kw | 1 | 1 | 1 | 1 | |
| The power capacity | kva | 15 | 15 | 15 | 15 | |
| Air pressure device | mpa | 0.6 | 0.6 | 0.6 | 0.6 | |
| Weight | kg | 3500 | 3500 | 3500 | 3500 | |
| Dimensions L*W*H | mm | 2450*1350*1850 | 2450*1350*1850 | 2450*1350*1850 | 2450*1350*1850 | |
Service and support are a top priority. Our engineers and after sales team are trained to provide uncompromising customer service and support.
Training policy
Pre-training is available at our factory freely for our clients, video or remote training can also be provided. We charge for local training on the basis of travel expense + man day.
Warranty policy
Warranty period: 12-month. It is free of charge if it is damaged under normal use during warranty period. If the equipment is damaged due to improper operation, we charge material fees within one year. After one year, it will charge material fees and Labor costs
1.What's the main products of your company?
A: We specialized in Swiss-type CNC lathes for small, complex, precision metal parts processing.
2.What CNC system do you use?
A:FANUC, SIEMENS, MITSUBISHI, SYNTEC, HCN .It depends on your choice.
3.How can I choose the most suitable machines?
A:Send us the products drawings and applications ,we will choose the most suitable machines for you.
4.What is your leading time?
A:Generally speaking, 1-3 month based on different quantity.
5.What's the Payment Terms?
A: Our practice is T/T ,30% deposite ,70% balance before shipment.
6.What's the shipment Terms?
A: By sea, by train, by truck, by air(metal parts samples).
7.What's the offering Terms?
A:EXW/Shenzhen, FOB/Shenzhen, CIF/Shenzhen, CFR/shenzhen.
8.Where is your factory located? How can I visit there?
A :Our company is located at Building A#, Xinhui industrial park, Tangtou, Shiyan, Baoan, Shenzhen, Guangdong, CN. We are warmly welcomed to visit us.
