Audited Supplier
Downhole Motor Pdm Drill Mud Motor 2 7/8~14 3/4" with bending house
Downhole motor PDM drill mud motor 9 7/8~14 3/4"
Downhole Motor Pdm Drill Mud Motor 9 7/8~14 3/4" with bending house
Specifications
1.Increased rate of penetration
2.Better hole deviation control
3.Reduction in drill string failure rate
4.Meet API-7-1
DOWNHOLE MOTOR/ MUD MOTOR
1. About the Manual
The SEACO Drilling MOTOR is a powerful and reliable positive displacement motor. The motor generates an optimum balance of rotational speed and high torque to drive a variety of drill bits at speeds that maximize tool life and performance. SEACO MOTORS offers a choice of flow rates, speeds, and torques to match a wide range of operational parameters. SEACO MOTORS are used in applications such as straight hole drilling, directional (steerable) drilling, horizontal drilling, hole opening, and re-entry(work over).
2. CONSTITUTION
Downhole motors differ in size and performance characteristics, but they share the same basic components as follows:
Crossover Sub
Safety Catch Sub
Power Section
Coupling Assembly
Bearing Assembly
Type | 5LZ73 7.0 | 5LZ89 7.0 | 5LZ95 7.0 | 7LZ95 3.5 | 9LZ95 7.0 | 5LZ120 7.0 | |
Hole Size | Mm | 95~121 | 114~152 | 118~152 | 118~152 | 118~152 | 149~200 |
In | 33/4~43/4 | 41/2~6 | 45/8~6 | 45/8~6 | 45/8~6 | 57/8~77/8 | |
Thread Type | Top | 23/8"REG | 23/8"REG | 27/8"REG | 27/8"TBG | 27/8"REG | 31/2"REG |
Bottom | 23/8"REG | 23/8"REG | 27/8"REG | 27/8"REG | 27/8"REG | 31/2"REG | |
Nozzle pressure drop | Mpa | 1.4~7 | 1.4~7 | 1.4~7 | 1.4~3.5 | 1.4~7 | 1.4~7 |
Recommend Flow | L/S | 3~8 | 3~8 | 7~12 | 7~11 | 6~10 | 9~14 |
Bit rotary | R/Min | 109~291 | 95~200 | 90~195 | 120~240 | 90~200 | 95~200 |
Motor pressure drop | Mpa | 2.4 | 2.4 | 3.2 | 2.4 | 2.4 | 3.2 |
Working torque | N.M | 460 | 628~838 | 1260~1630 | 723~960 | 750~1020 | 1480~1820 |
Lagging torque | N.M | 650 | 1300 | 2200 | 1500 | 1550 | 2440 |
Output power | KW | 4.7~12.5 | 7.3~15.3 | 13.6~29.5 | 18~24 | 8.3~18.5 | 16.4~34.5 |
Recommended bit weight | T | 4.7~12.5 | 2.0 | 2.5 | 1.0 | 2.5 | 3 |
Max bit weight | T | 2.5 | 3.0 | 5 | 1.5 | 5 | 5 |
Length | Straight | 3450 | 3570 | 4450 | 2500 | 3590 | 5085 |
Single curve | 3450 |
| 4675 |
| 3590 | 5335 | |
Weight | Straight | 100 | 98 | 140 | 89 | 120 | 390 |
Single curve | 102 |
| 150 |
| 120 | 420 | |
Type | 5LZ165 7.0 | 5LZ165 7.0 | 5LZ172 7.0 | 5LZ197 7.0 | 5LZ210 7.0 | 5LZ244 7.0 | |
Hole Size | Mm | 213~251 | 213~251 | 213~251 | 251~311 | 251~375 | 311~445 |
In | 83/8~97/8 | 83/8~97/8 | 83/8~97/8 | 97/8~121/4 | 97/8~143/4 | 121/4~171/4 | |
Thread type | Top | 41/2"REG | 41/2"REG | 41/2"REG | 51/2"REG | 65/8"REG | 65/8"REG |
Bottom | 41/2"REG | 41/2"REG | 41/2"REG | 65/8"REG | 65/8"REG | 75/8"REG | |
Nozzle pressure drop | Mpa | 1.4~7 | 1.4~7 | 1.4~7 | 1.4~7 | 1.4~7 | 1.4~7 |
Recommend Flow | L/s | 20~28 | 20~28 | 25~35 | 25~57 | 35~50 | 50~75 |
Bit rotary | R/min | 90~160 | 80~150 | 90~160 | 86~196 | 100~160 | 100~160 |
Motor pressure drop | Mpa | 2.4 | 3.2 | 4.0 | 4.0 | 4.0 | 4.0 |
Working torque | N.m | 2750~3960 | 3860~4980 | 5860~6970 | 7800~9350 | 9980~11900 | 12870~13970 |
Lagging torque | N.m | 6300 | 8470 | 11550 | 18690 | 19600 | 23000 |
Output power | Kw | 31.6~56.2 | 37~69.4 | 60.4~107.4 | 70~160 | 115~183 | 140~225 |
Recommended bit weight | T | 8 | 8 | 10 | 16 | 17 | 18 |
Max bit weight | T | 16 | 16 | 16 | 24 | 28 | 30 |
Length | Straight | 5930 | 6830 | 7230 | 8470 | 8400 | 9060 |
Single curve | 6180 | 7080 | 7480 | 8720 | 8660 | 9320 | |
Weight | Straight | 742 | 820 | 930 | 1140 | 1460 | 1980 |
Single curve | 772 | 850 | 970 | 1195 | 1520 | 2050 | |
Packing type:
