Audited Supplier
GD03
1 Year
1 Year
None
Driving Data Recording, Accident Recording and Analyzing, Video Storing, Identity Recognition, Data Input, Fatigue Driving Warning, Over Speed Warning
360°
5 Million
16GB-128GB
Night Vision
Image Recorder
2-way
Full HD
Great-Will/Targestar
Autochip Mt6735 Cortex-A53 Quad Core, 1.5GHz
Android 5. 1
GPS&Bd Dual Band, with External GPS Antenna
GSM B5/B3 WCDMA B1/B5 TD-SCDMA B34/B39 Tdd-LTE B38
802. 11b/G/N 2.4GHz; Support WiFi Hotspot
3-Axis G-Sensor
Gc2053( 1920X1080p), Mipi Interface
Gc1064 ( 1280X720p), IR(850); Mipi Interface
4mAh
-20~+70°c
-30~+80°c
4%~90% Rh
40% Rh
1X Dash Camera, 1X Power Cable;1xgps Antenna, 1X3m
Great Will
Carton Box
109mm x 61mm x 28mm
China
8526919090
Product Description
GD03--Dual Channels Cameras Driving Video Recorder 4G Night Vision Dash Camera Full HD 1080P Wide Angle Lens Security Camera DVR Car Accessories Auto Electronics Dash Cam With SIM Card For Van Truck Bus
FAQ:
Emergency video recording is enabled by default. If the dash cam detects any collisions, it will automatically record an emergency video.
Also the recording process cannot be interrupted. Once the emergency recording is completed, the dash cam will automatically switch back to normal video recording mode.
If the dash cam automatically stops recording, please use the following to solve the problem,
1) Restoring dashcam to factory settings
2) Formatting the internal memory card
3) Updating firmware
4) Detecting abnormality in the internal memory card (e.g., non-dash cam-related files). In this case, please format the internal memory card.
After exiting these operations, the dash cam will automatically resume recording.
1) The positioning system on the dashcam is not functioning and cannot obtain positioning information.
Solution: Check the dashcam's GPS light. If it is not lit, move the dash cam to an open space and wait for approximately 3 minutes before trying again.
2) The car did not move, hence no driving record data was generated.
Solution: Ensure that the dashcam is correctly installed in the car and operating normally. Drive the car a certain distance to generate driving record data.
3) The phone has no network connection. The phone requires a network connection to load the map when viewing driving records.
Solution: Disconnect the phone from the dashcam's Wi-Fi hotspot and connect it to a network (WLAN or mobile data network).
1) The dashcam's camera is not positioned correctly, too far from the center front, i.e. too close to the left and right sides or the upper and lower sides.
2) The nighttime light is too dim, making it difficult to identify the lane line accurately.
3) The lane line appears blurred, making it impossible to identify.
| 4G Smart Night Vision Dash Camera Product Parameter | ||
| Storage | Flash ROM | 8GB EMMC |
| RAM | 1GB LPDDR3 | |
| ADAS | Support | |
| Loop Recording | Support | |
| Parking Monitor | Support | |
| IR Night Vision | Support Infrared light in Inside Camera | |
| SOS | Support one-key click alarm | |
| IR Night Vision | Support Infrared light in Inside Camera | |
| SOS | Support one-key click alarm | |
Input/Output | Speaker | Built-in high-fidelity mono 1.5W / 8R speaker |
| MIC | Build in MIC-Phone Noise Reduction | |
| TF card | Support TF card, maximum 128GB (not include) | |
| USB | Micro USB 2.0 | |
| Key button | Power button | |
| RESET | Support | |
| Powered by | External power | BMW line power supply; power supply voltage 9V- 16V |
| Car Assist App for Android/ iOS | ||
| Parking Monitor | Support capture front and inside camera video and image | |
| Real-time preview | Support 1080p/720p video live preview | |
| GPS track history | Support GPS logger path and video synchronous playback | |
| Monitor and Alarm | Support Message / photo alarm if collision happened when car parking | |
| Video download | Support Point-to-point video download to the phone, don't consume internet data | |
The DMS (Driver Monitoring System) camera in a car's dashcam monitors the driver's behavior and condition. Its primary functions include:
1. Driver Monitoring: Observing if the driver is fatigued, distracted, or in an unusual posture.
2. Safety Alerts: Providing alerts or warnings when issues are detected, reducing the risk of accidents.
3. Behavior Analysis: Recording driver actions like phone use or smoking, offering suggestions for better driving habits.
4. Accident Recording and Evidence: Serving as evidence in accidents, aiding in understanding causes and responsibilities.
Overall, the DMS camera aims to monitor and enhance driving behavior, thus improving overall driving safety.
1. Driver Monitoring: Observing if the driver is fatigued, distracted, or in an unusual posture.
2. Safety Alerts: Providing alerts or warnings when issues are detected, reducing the risk of accidents.
3. Behavior Analysis: Recording driver actions like phone use or smoking, offering suggestions for better driving habits.
4. Accident Recording and Evidence: Serving as evidence in accidents, aiding in understanding causes and responsibilities.
Overall, the DMS camera aims to monitor and enhance driving behavior, thus improving overall driving safety.
When a dashcam is connected to a 4G network, it serves several purposes and functionalities:
1. Remote Real-time Monitoring: With a 4G connection, you can remotely monitor your vehicle's real-time movements. This allows you to check the vehicle's location, speed, and surroundings, enabling real-time tracking of the vehicle's status.
2. Remote Playback and Download: Accessing the dashcam's stored footage remotely, you can review historical driving records, even download relevant videos for verification or sharing purposes.
3. Emergency Event Notifications: In the event of a collision or an unexpected incident, a dashcam connected to a 4G network might automatically send alerts to you or specified contacts, enabling swift action.
4. Cloud Storage and Backup: By connecting to the cloud through a 4G network, the dashcam can automatically store video footage, ensuring the security and backup of video data, thus preventing loss due to device damage or loss.
In summary, a 4G network connection enhances the intelligence and convenience of a dashcam, allowing for remote management and monitoring of vehicle safety.
1. Remote Real-time Monitoring: With a 4G connection, you can remotely monitor your vehicle's real-time movements. This allows you to check the vehicle's location, speed, and surroundings, enabling real-time tracking of the vehicle's status.
2. Remote Playback and Download: Accessing the dashcam's stored footage remotely, you can review historical driving records, even download relevant videos for verification or sharing purposes.
3. Emergency Event Notifications: In the event of a collision or an unexpected incident, a dashcam connected to a 4G network might automatically send alerts to you or specified contacts, enabling swift action.
4. Cloud Storage and Backup: By connecting to the cloud through a 4G network, the dashcam can automatically store video footage, ensuring the security and backup of video data, thus preventing loss due to device damage or loss.
In summary, a 4G network connection enhances the intelligence and convenience of a dashcam, allowing for remote management and monitoring of vehicle safety.
FAQ:1.How to record an emergency video?
Emergency video recording is enabled by default. If the dash cam detects any collisions, it will automatically record an emergency video.
Also the recording process cannot be interrupted. Once the emergency recording is completed, the dash cam will automatically switch back to normal video recording mode.
2.Why the dash cam stops recording?
If the dash cam automatically stops recording, please use the following to solve the problem,
1) Restoring dashcam to factory settings
2) Formatting the internal memory card
3) Updating firmware
4) Detecting abnormality in the internal memory card (e.g., non-dash cam-related files). In this case, please format the internal memory card.
After exiting these operations, the dash cam will automatically resume recording.
3.No driving route data displays on the app/platform
1) The positioning system on the dashcam is not functioning and cannot obtain positioning information.
Solution: Check the dashcam's GPS light. If it is not lit, move the dash cam to an open space and wait for approximately 3 minutes before trying again.
2) The car did not move, hence no driving record data was generated.
Solution: Ensure that the dashcam is correctly installed in the car and operating normally. Drive the car a certain distance to generate driving record data.
3) The phone has no network connection. The phone requires a network connection to load the map when viewing driving records.
Solution: Disconnect the phone from the dashcam's Wi-Fi hotspot and connect it to a network (WLAN or mobile data network).
4.Why does ADAS calibration fail?
1) The dashcam's camera is not positioned correctly, too far from the center front, i.e. too close to the left and right sides or the upper and lower sides.
2) The nighttime light is too dim, making it difficult to identify the lane line accurately.
3) The lane line appears blurred, making it impossible to identify.
