Audited Supplier
MBC-65-ND-S00
Industrial Gas Burner
ISO, CE
New
Low
Valve, Solenoid Valve
Control Gas
Solenoid Valve
Mbc-65-ND-S00
Dungs
220-230 V, 50 - 60 Hz
-15 °c to +60 °c
About 3.5kg
100 % ED
65 Mbar (6.5 Kpa)
IP 54
Video Technical Support
Gas Burners Industrial Accessories
Hydrogen, Nitrogen
Medium
Dungs
Carton
45X32X44 cm
Germany
8481100090
Product Description
Dungs MBC-65-ND-S00 251195 Air Gas MultiBloc Control Solenoid Valves Safety Combination One-Stage Mode For Gas Burners
Technical description Filter, valves, regulator and pressure switch are integrated in the DUNGS GasMultiBloc to form a compact fitting.
- Dirt trap:Microfilter
- One regulator and two valves
- Two valves (fast opening)
- Regulator (fast opening) or regulator (slow opening)
-Solenoid valves as per DIN EN 161 Class A Group 2 MBC-65 to 200 mbar (20 kPa) MBC-120 to 360 mbar (36 kPa)
- Sensitive setting of output pressure via servopressure regulator as per DIN EN 88 Class C Group 2
- Opening delay by means of damped pressure rise
-High flow values at low pressure difference
-DC voltage solenoid drive
- Main valve restrictor downstream of regulator - Flange connections with tube threads as per ISO 7/1
- Easy-to-mount, small dimensions, low weight
Application
The modular system provides individual solutions in gas safety and control systems. Suitable for gases of gas families 1, 2, 3 and other neutral gaseous media.
Approvals EC type test approval as per EC Gas Appliance Directive:
Approvals
MB-65/120-… CE-0085 AU 0377
EC type test approval as per EC Pressure Equipment Directive:
MB-65/120-… CE0036
Approvals in other important gas consuming countries.
Gas flow
1. Valves V1 and V2 are closed. Inlet pressure is applied to chamber A until valve V1 is seated. 2. The min. pressure switch is connected to Chamber A by a borehole. If the inlet pressure exceeds the reference value set on the pressure switch, it switches to the automatic gas burner control.
3. After a release signal from the automatic gas burner control, valves V1 and V2
open. The gas flow through chambers A, B, C and D of the GasMultiBloc is released.
open. The gas flow through chambers A, B, C and D of the GasMultiBloc is released.
Dirt trap device
Dirt trap device, fine-meshed filter (1) to protect the fitting.
Operating mode of valve V1 and valve V2
The plungers of valves V1 and V2 are connected to the valve plate units. On opening, the plungers pretension the closing springs. The valves open completely without limitation.
Closing function
When the power supply of solenoid coils of V1 and V2 is interrupted, the valves are closed within < 1s by means of pressure springs.
Operating mode of servopressure regulator
The servopressure regulator equalises the pressure fluctuations in the
power supply. The output pressure is set at the reference value adjustment device (14). The servopressure regulator controls the
pressure regulator (5) via nozzle (7). The "slow opening" function is enabled by a damped pressure increase. The opening time of
MBC-120 cannot be set. With MBC-120, the opening behaviour can be adjusted at high operating pressure values.
pressure regulator (5) via nozzle (7). The "slow opening" function is enabled by a damped pressure increase. The opening time of
MBC-120 cannot be set. With MBC-120, the opening behaviour can be adjusted at high operating pressure values.
Start flow adjustment
The adjustment screw (15) for the start flow restrictor (10) is closed (factory setting). The start flow can be set by
opening the restrictor up to approx. 80 % of the main flow.
opening the restrictor up to approx. 80 % of the main flow.
Main flow adjustment
The adjustment screw (13) for the main flow restrictor (9) is completely open (factory setting). The servopressure regulator Sectional view MBC-65-DLE-S20 Pressure taps 1. Microfilter 2. Inlet P1 3. Housing 4. Spring, gas pressure regulator 5. Diaphragms, gas pressure regulator 6. Cover side 7. Nozzle 8. Outlet P3 9. Main flow restrictor 10. Start gas restrictor 11. Damper 12. Servopressure regulator 13. Adjustment screw - main flow 14. Reference value adjustment device -pressure regulator 15. Adjustment screw - start flow 16. Solenoid housing V1, V2 17. Electrical connection 18 Setting of opening time (only MBC-120) keeps the output pressure upstream of the main flow restrictor constant. The burner pressure is determined when the output pressure and the main flow restrictor (9) are adjusted.
Gas pressure switch
The gas pressure switch
monitors the gas pressure on the inlet side; the pressure switch is preset.
monitors the gas pressure on the inlet side; the pressure switch is preset.
item | value |
Warranty | 1.5 years |
Type | Kitchen Gas Shut-Off Valves, Emergency Shut-Off Valves, Truck Shut-Off Valves, AXIAL VALVES, Backwater Valves, Pressure Vacuum Breaker, Atmospheric Vacuum Breaker, Safety Relief Valves, Adjustable Relief Valves, Pressure Regulators, Boiler Feed Valves, VENT Valves, Mixing Valves, Temperature Regulating Valves, SOLENOID VALVES, Globe Valves, PLUG VALVES, Drain Valves, Air Valves & Vents, Faucet Valve, Flush Valves, REVERSING VALVE |
Customized support | OEM |
Place of Origin | Germany |
Brand Name | Dungs |
Model Number | MBC-65-ND-S00 |
Application | Gas Burner Accessories |
Power | Solenoid |
Media | Gas |
Port Size | Rp 1/2 |
Structure | Plug |
Product name | Dungs MBC-65-ND-S00 GAS Solenoid Control Valves |
Model | MBC-65-ND-S00 |
Brand | Dungs |
Power Supply | 220-230 VAC,50 - 60 Hz |
Max. operating pressure | 65 mbar (6.5 kPa) |
Ambient temperature | -15 °C to +60 °C |
Opening time | < 1 s |
Color | Grey |
After Warranty Service | Video technical support |
Usage | Gas Burner Accessories |
Dungs MBC-65-ND-S00 251195 Air Gas MultiBloc Control Solenoid Valves Safety Combination One-Stage Mode For Gas Burners
OR Dungs DMV-D-5065/11 Double Solenoid Control Valves Burner Gas Valve For Burners Electromagnetic Valve
