Audited Supplier
| Model | Main components configuration | Main Material | Host size | Ozone Production (kg/h) | Energy Consumption | Featured Design |
| NO.1 | Air compressor, gas tank, filter, cold dryer, oxygen generator, ozone generator, plate heat exchanger | Stainless Steel | 2200*1600*1700mm | 1 | 7kw.h Ozone per kg | It can produce ultra-clean ozone with high concentration, large flow and high pressure, and the ozone concentration can reach 140~160mg/L. Adopting advanced manufacturing technology and materials, it can effectively improve the purity of ozone generation and reduce the generation of impurities and by-products. It reduces the energy consumption of the ozone generator, improves energy utilization efficiency, reduces operating costs, and has good economic and environmental benefits. The key components of the ozone generator adopt high-quality materials and advanced manufacturing technology, with good corrosion resistance, wear resistance and stability, and can operate stably for a long time, reduce the failure rate and maintenance times of equipment, and improve the continuity and stability of production. |
| NO.2 | 2230*1700*1700mm | 2 | ||||
| NO.3 | 2250*1800*1850mm | 3 | ||||
| NO.4 | 2300*1850*1850mm | 4 |
Machinery Introduction
During the process of purifying water quality, the original components of the water will not be changed, and the beneficial mineral elements contained in the water can be retained;
Due to the poor stability of ozone, it easily decomposes into oxygen in water, so it can not only play a role in sterilization and disinfection, but also oxygenate the water quality;
Small ozone generator disinfection purifies water quality through oxidative flocculation, and does not produce secondary pollution during operation. The oxides produced during the disinfection process are non-toxic, odorless, and biodegradable substances;
Since small ozone generators have extremely strong oxidizing properties, harmful substances such as nitrite and hydrogen sulfide that are more harmful to fish in fresh water or seawater used in the aquaculture industry can be oxidized into non-toxic NO, SO, N and other organic substances. At the same time, inorganic substances can also be degraded to produce non-toxic substances to organisms, thereby reducing biological oxygen consumption and chemical oxygen consumption in the water;
The strong oxidizing performance of the small ozone generator can quickly kill algae and other protozoa in the water.
a. High-efficiency discharge tube
Micro-gap double-layer discharge
HMS Patented design hexagon conductive plate
Constant high-voltage sharp pulse discharge mode
Specially for the capacitive load of ozonegeneration chamber,constanthigh-voltage sharp pulse dischargemodeis adopted to centralize thehigh-voltage energy in the most efficientHigh-Voltage lonization Dischargeamplitude, with high utilization rate ofelectric energy andlowpowerconsumption.Specially for the capacitive load of ozone generation chamber, constanthigh-voltage sharp pulse discharge mode is adopted to centralize thehigh-voltage energyin the most efficient High-Voltage lonizationDischarge amplitude, with high utilization rate of electric energy and lowpower consumption.
a.Reasonable Transformer Parameter Design
b.Power Supply Design at the Right Ratio
a. Power Protection Technology
b. Protection against electrical breakdown
c. Protection against fragmentation of chamber media
d. Dedicated Monitoring Protection Circuits
5.Application Field
a. Sterilization and disinfection of health products
b. Fruit and vegetable preservation
c. Livestock and poultry breeding
d. Agricultural production
e. Sewage treatment
f. Medical care
g. Public places
10,000 square meters of water treatment filler production workshop
20,000 square meters of high-end environmental protection equipment production workshop
4000 square meters large open laboratory
More than 30 productive experimental bases
More than 40 pilot systems
More than 50 small pilot test devices
More than 60 large instruments and equipment
More than 50 petents
More than 18 years of experience
Top 5 position of environmental protection technology industry in China.
1. Chemical/pharmaceutical/industrial park comprehensive wastewater pretreatment and upgrading
2. Coal chemical wastewater treatment
3. Petrochemical energy wastewater treatment
4. Dye/pigment wastewater treatment
5. Pesticide wastewater treatment
A:No minimum order, but it can get a discount if you order a large quantity.
3.Q:Do you have certificates?
A:Yes,we have ISO,SGS certificate.
4.Q:Can you meet my special requirements for the product?
A:Yes,we have a professional design team.We can provide drawings according to your requirements.
5.Q:How to buy your idea products?
A:You can provide us your water or waste sources,water or waste quality,flow rate and ground area (connect us for more details)
6.Q:How to pay?
A:T/T and L/C are acceptable and T/T will be more appreciated 30% deposit before producing,70% balance before loading by T/T.
7.Q:What is the delivery time ?
A: It depends on order quantities .Generally speaking ,the delivery time will be within 2 to 4 weeks.
8.Q:How to pack the products?
A:We use standard package .If you have special package requirements ,we will pack as required ,but the fees will be paid by customers.
9.Q:How to install after the equipment arriving destination?
A:We will provide detailed illustrations to you. If it is necessary, we will send technicians to help you. However, the visa fee ,air tickets ,accommodation, wages will be paid by buyers.
