Audited Supplier
ZnAl based
Industrial, Electronics, Shot Blasting, Anti-Corrosion
JIS, ASTM, GB
ZnAl Based
Zinc Shot
Non-alloy
Not Powder
Damno
Bundle, Plastic Spool, Drum, Plywood Pallet
0.3mm-1.60mm
Shaoxing, China
79040000
Product Description
Shot blasting is a conventional technology for metal surface treatment. As a kind of shot blasting material, it is used for removing oxidation skin, and burr, eliminating the surface defect, removing stress, etching, unknit, strengthening, and preventing rust before painting of metal die-casting, precision casting, hardware tool, machinery manufacturing, automobile spare parts, apparatus, pump valve industry.
Shot peening is a method of cold working a part surface under a spray or blast of round shot to increase a part's fatigue life. Fatigue failures usually begin on the surface of a part. Shot peening makes tiny dents or curves on the surface of the metal. This creates a layer of compressive stress, which delays the creation and growth of fatigue cracks. In some instances, peening can increase the fatigue life of a part by 2,000% or more.
Chemical composition:
Product Features:
The holding time of the hardness test is 10 seconds, and the test temperature is 20 degrees.
Diameter: 0.3mm≤Ф≤1.60mm
Product packing:
Pallet will be used, such as 1100mmX1100mm, 1200mmX800mm, 1000mmX1000mm, 800mmX800mm. 
Our wire is an ideal material to make shot peening materials.
Zinc alloy has a wide range of applications with high-precision surface treatment and is safer and more environmentally friendly in use.
We are looking forward to your cooperation!
Shot peening is a method of cold working a part surface under a spray or blast of round shot to increase a part's fatigue life. Fatigue failures usually begin on the surface of a part. Shot peening makes tiny dents or curves on the surface of the metal. This creates a layer of compressive stress, which delays the creation and growth of fatigue cracks. In some instances, peening can increase the fatigue life of a part by 2,000% or more.
Chemical composition:
| Item | Main elements (%) (min) | Impurities (≤)%(max) | |||||||
| Zn | Al | Mg | Ni | Fe | Pb | Cd | Cu | TTL | |
| ZA2Mg | REMAINING | 1.0-3.0 | 0.001-0.005 | - | 0.08 | 0.01 | 0.002 | 0.05 | 0.1 |
| ZA3Mg | REMAINING | 2.0-4.0 | 0.001-0.005 | - | |||||
| MLZ-1 | REMAINING | 0.005-0.5 | 0.005-0.02 | - | |||||
| MLZ-2 | REMAINING | - | - | 0.001-0.004 | |||||
Product Features:
| Item | Hardness HV0.1 |
| ZA2Mg | ≥ 35 |
| ZA3Mg | ≥ 42 |
| MLZ-1 | ≥ 70 |
| MLZ-2 | ≥ 25 |
Diameter: 0.3mm≤Ф≤1.60mm
| DIAMETER | PERMISSIBLE |
| (MM) | VARIATION |
| 0.3≤Ф<0.6 | +0.00,-0.02 |
| 0.5≤Ф≤1.00 | +0.00,-0.03 |
| 1.00≤Ф≤1.6 | +0.00,-0.04 |
| 1.60<Ф≤2.00 | +0.00,-0.05 |
| 2.00<Ф≤2.50 | +0.00,-0.06 |
Product packing:
| Hard paper drum | 20-400 kg |
| Plastic spool | 10-25 kg |
| bundle | 5-40 kg |
Our wire is an ideal material to make shot peening materials.
Zinc alloy has a wide range of applications with high-precision surface treatment and is safer and more environmentally friendly in use.
We are looking forward to your cooperation!
