Audited Supplier
GTAT-D0018
New
Customized
ISO9001, CE, ISO45001/ISO14001
GTEE
Wooden Case
about 120kg
Guangzhou, China
90230000
Product Description
EV trainer Electric Car Can-Bus System Trainer automotive training board educational equipment
P.N.: GTAT-D0018
Technical parameter:
Dimension: 2000x700x2000mm(LxWxH);
Power supply: single-phase, AC220V/50Hz;
Product description:
This training platform adopts the original BYD E5 CAN-BUS system components, equipped with motor control system, battery management system, main control management, ABS-ECM, SRS-ECM, EHPS, air conditioning ECU, smart key control ECU, air conditioning system, combination instrument system and other devices. It can visually display the structural composition of the electric vehicle CAN-BUS system and demonstrate the working process of each system. It is equipped with fault setting module and can provide training on fault setting and troubleshooting for electric vehicle CAN-BUS systems.
Product composition:
1. Left and right front headlights
2. Left and Right Horn
3. Dashboard
4. Left and right rearview mirrors
5. Left and right fog lights
6. Battery management controller
7. High voltage electronic control assembly
8. Left and right front door lock motors
9. Windshield wiper motor
10. Indoor lights
11. Keyless ECU
12. ABS-ECU
13. Steering shaft lock
14. Keyless entry antenna
15. Dimming switch
16. High mounted brake light
17. OBD diagnostic seat
18. Shift lever
19. CD radio
20. License plate lights
21. Left and right front window motors
22. Left and right rear door lock motors
23. Front headlight adjustment switch/rearview mirror switch
24. One click start switch
25. Left and right rear window motors
26. Washing motor
27. Left and right tail lights
28. Main controller
29. Air conditioning controller
30. Gateway controller
31. Driver's side window switch
32. Left and right rear window switches
33. Left and right front window switches
34. Hazard light switch
35. Horn switch
36. Reverse light switch
37. Fusebox
38. SRS-ECU
39. Combination switch
40. Steering gear ECU
41. Fault setting module: manual switch type (optional intelligent type)
Training Courses
1. Function introduction of the main components of the CAN bus network system for electric vehicles
2. Demonstration of the working process of the CAN bus network system for electric vehicles
3. Electrical parameter testing of electric vehicle CAN bus network system
4. Fault setting and troubleshooting
5. Use of scanner.
Packing&Shipping
Solid plywood box and normally ship by sea, but if the size is not big, also by air, FedEx or DHL, TNT and so on.
Company Profile
Guangzhou Guangtong Educational Equipment Co.,LTD is a well-known high-tech company, we participate in many international educational tenders and help our customer win the tender.
We are specialized in development and manufacturing of professional Educational Equipment including automotive teaching equipment, air conditioning and refrigeration teaching equipment, electrical and electronic teaching equipment, lift teaching, solar energy trainer, electric car training device and other vocational training equipment etc.
GTEE is located in Baiyun District, Guangzhou City and adjacent to Guangzhou Baiyun International Airport.
With our several years of design, development, manufacturing and international service experience and expertise, GTEE is growing up and developing very fast. We continuously focus on providing high quality products with competitive price and reliable after sale services for our overseas customers. We will response to our customers within 24 hours after get the feedback and requirements.
Show Room:
Customer Photos:
FAQ
Q: Are you trading company or manufacturer?
A: We are manufacturer.
Q: How long is your delivery time?
A: Depends on product quantity and stock. Please check with our sales team.
Q: What are your terms of payment?
A: Payment<=5000USD, 100% in advance.
Payment>=5000USD, 50% T/T in advance, 50% T/T balance before shipment.
Q: Do you offer aftersales support ?
A: Yes, of course, we will provide training materials together with the device, and also we can provide on-site training and installation if customer request. We also have technical engineer for online or remote support, and if within warranty, products parts damaged due to our quality problems, we will send parts via DHL to you for replacement for free as we seek long term cooperation with customers.
Q: How to have exclusive sales rights of GTEE?
A: Place order to GTEE, when the order amount reach certain level, GTEE and customer will negotiate about exclusive rights.
Or send your company profile to GTEE, after GTEE evaluation, start from general agents and gradually become exclusive agent.
P.N.: GTAT-D0018
Technical parameter:
Dimension: 2000x700x2000mm(LxWxH);
Power supply: single-phase, AC220V/50Hz;
Product description:
This training platform adopts the original BYD E5 CAN-BUS system components, equipped with motor control system, battery management system, main control management, ABS-ECM, SRS-ECM, EHPS, air conditioning ECU, smart key control ECU, air conditioning system, combination instrument system and other devices. It can visually display the structural composition of the electric vehicle CAN-BUS system and demonstrate the working process of each system. It is equipped with fault setting module and can provide training on fault setting and troubleshooting for electric vehicle CAN-BUS systems.
Product composition:
1. Left and right front headlights
2. Left and Right Horn
3. Dashboard
4. Left and right rearview mirrors
5. Left and right fog lights
6. Battery management controller
7. High voltage electronic control assembly
8. Left and right front door lock motors
9. Windshield wiper motor
10. Indoor lights
11. Keyless ECU
12. ABS-ECU
13. Steering shaft lock
14. Keyless entry antenna
15. Dimming switch
16. High mounted brake light
17. OBD diagnostic seat
18. Shift lever
19. CD radio
20. License plate lights
21. Left and right front window motors
22. Left and right rear door lock motors
23. Front headlight adjustment switch/rearview mirror switch
24. One click start switch
25. Left and right rear window motors
26. Washing motor
27. Left and right tail lights
28. Main controller
29. Air conditioning controller
30. Gateway controller
31. Driver's side window switch
32. Left and right rear window switches
33. Left and right front window switches
34. Hazard light switch
35. Horn switch
36. Reverse light switch
37. Fusebox
38. SRS-ECU
39. Combination switch
40. Steering gear ECU
41. Fault setting module: manual switch type (optional intelligent type)
Training Courses
1. Function introduction of the main components of the CAN bus network system for electric vehicles
2. Demonstration of the working process of the CAN bus network system for electric vehicles
3. Electrical parameter testing of electric vehicle CAN bus network system
4. Fault setting and troubleshooting
5. Use of scanner.
Packing&Shipping
Solid plywood box and normally ship by sea, but if the size is not big, also by air, FedEx or DHL, TNT and so on.
Company Profile
Guangzhou Guangtong Educational Equipment Co.,LTD is a well-known high-tech company, we participate in many international educational tenders and help our customer win the tender.
We are specialized in development and manufacturing of professional Educational Equipment including automotive teaching equipment, air conditioning and refrigeration teaching equipment, electrical and electronic teaching equipment, lift teaching, solar energy trainer, electric car training device and other vocational training equipment etc.
GTEE is located in Baiyun District, Guangzhou City and adjacent to Guangzhou Baiyun International Airport.
With our several years of design, development, manufacturing and international service experience and expertise, GTEE is growing up and developing very fast. We continuously focus on providing high quality products with competitive price and reliable after sale services for our overseas customers. We will response to our customers within 24 hours after get the feedback and requirements.
Show Room:
Customer Photos:
FAQ
Q: Are you trading company or manufacturer?
A: We are manufacturer.
Q: How long is your delivery time?
A: Depends on product quantity and stock. Please check with our sales team.
Q: What are your terms of payment?
A: Payment<=5000USD, 100% in advance.
Payment>=5000USD, 50% T/T in advance, 50% T/T balance before shipment.
Q: Do you offer aftersales support ?
A: Yes, of course, we will provide training materials together with the device, and also we can provide on-site training and installation if customer request. We also have technical engineer for online or remote support, and if within warranty, products parts damaged due to our quality problems, we will send parts via DHL to you for replacement for free as we seek long term cooperation with customers.
Q: How to have exclusive sales rights of GTEE?
A: Place order to GTEE, when the order amount reach certain level, GTEE and customer will negotiate about exclusive rights.
Or send your company profile to GTEE, after GTEE evaluation, start from general agents and gradually become exclusive agent.
