Audited Supplier
MQ
Online Service
1 Year
According to Product Size
220V
Aluminum Alloy
Pneumatic
Diaphragm
Nitrile Rubber
Explosion
1-1/2"
8.3
6
8
GLOYEL
Standard Export Package
according to product size
Henan
Product Description
Economical and Practical Coating Industry Pneumatic Diaphragm Membrane Mud Pump
Pneumatic disc valve pump
Technical parameter
| Specifications | Maximum working pressure (bar) | Maximum dry suction lift (m) | Maximum wet suction lift (m) | Maximum flow rate (L/min) | Maximum particle diameter (mm) | Weight (kg) | Common pump types |
| 1-1/2" | 8.3 | 6 | 8 | 480 | 25 | 30 | FA15AAXXS |
| 2" | 8.3 | 6 | 8 | 680 | 38 | 40 | FA20AAXXS |
| 3" | 8.3 | 6 | 8 | 902 | 50 | 62 | FA30AAXXS |
Can transport powder with a bulk density of 50-850kg/m
Maximum conveying capacity 4.5T/h, maximum conveying height 30m
Easy to install, convenient to use, and easy to move, this product is ready to use and does not require debugging.
Good sealing performance, no leakage throughout the powder process, avoiding contact between personnel and materials.
Micro stirring avoids material heating, and there is no electric spark or heat generation during operation.
Low shear force, maximizing the integrity and initial state of the material.
Economical and practical, the cost is only one tenth of that of traditional equipment, and maintenance is simple.
| Specification | A | B | C | D | E | F | G | H | I | J | K | L |
| 1-1/2" | 519 | 310 | 233 | 197 | 136 | 96 | 10 | 569 | NPT3/4 | BSPT2" | 78 | 510 |
| 2" | 546 | 330 | 262 | 222 | 160 | 110 | 12 | 608.5 | NPT3/4 | BSPT2" | 74.2 | 544 |
| 3" | 696.5 | 420 | 314.6 | 262.6 | 210 | 150 | 14 | 776.5 | NPT3/4 | BSPT3" | 102.5 | 755.6 |
Pneumatic powder pump
Technical parameter| Specifications | Maximum working pressure (bar) | Maximum head (m) | Maximum flow rate (T/h) | Maximum particle diameter (mm) | Weight (kg) | Common pump types |
| 2" | 8.3 | 30 | 2.5 | 6.5 | 30 | PA20AAXXX |
| 3" | 8.3 | 30 | 4.5 | 10 | 52 | PA30AAXXX |
Can transport powder with a bulk density of 50-850kg/m
Maximum conveying capacity of 4.5T/h, maximum conveying height of 30m
Easy to install, convenient to use, and easy to move, this product is ready to use and does not require debugging.
Good sealing performance, no leakage throughout the powder process, avoiding contact between personnel and materials.
Micro stirring avoids material heating, and there is no electric spark or heat generation during operation.
Low shear force, maximizing the integrity and initial state of the material.
Economical and practical, the cost is only one tenth of that of traditional equipment, and maintenance is simple.
| Specification | A | B | C | D | E | F | G | H | I | J |
| 2" | 651 | 565 | 330 | 498 | 17 | 2"BSP | 330 | Φ16 | 220 | 250 |
| 3" | 792 | 678 | 387 | 597 | 17 | 3"BSP | 420 | Φ16 | 220 | 280 |
Pneumatic booster diaphragm pump
Infinite regulation of boost ratio (1-2 times), without the need to deliberately control the air source pressure.
The pressure value dial displays, allowing for real-time monitoring and stable output of pressure values.
Technical parameter| Specifications | Maximum working pressure (bar) | Maximum head (m) | Maximum flow rate (L/min) | Maximum particle diameter (mm) | Weight (kg) | Common pump types |
| 1-1/2" | 14 | 140 | 380 | 6.5 | 60 | ZA15SAXXX |
| 2" | 14 | 140 | 680 | 6.5 | 80 | ZA20SAXXX |
| 3" | 14 | 140 | 902 | 10 | 120 | ZA30SAXXX |
Easy installation, easy to use and no debugging required.
Good sealing performance, no leakage of materials throughout the entire process, avoiding contact between personnel and materials
Micro stirring avoids material heating, and there is no electric spark or heat generation during operation.
Low shear force, maximizing the integrity and initial state of the material.
The maximum flow rate can reach 90OL/Min, and the maximum lift can reach 140 meters
The optimized diaphragm and ball valve have reliable performance and longer service life.
Economical and practical, the cost is only one tenth of that of traditional equipment, and maintenance is simple.
Electric diaphragm pump
Product Features
Efficiency is 80% higher than that of pneumatic diaphragm pumps
Can be equipped with back pressure shutdown and leakage alarm devices
Unique back pressure protection design to extend the service life of the diaphragm
No additional pulsation dampers need to be added to reduce pulsation
Can be turned dry
Self priming (can operate without the need for a manual priming pump)
Compared with traditional pneumatic diaphragm pumps, the high-efficiency and energy-saving electric drive mode. Can reduce energy consumption by up to 5 times
Can be equipped with back pressure shutdown and leakage alarm devices
Unique back pressure protection design to extend the service life of the diaphragm
No additional pulsation dampers need to be added to reduce pulsation
Can be turned dry
Self priming (can operate without the need for a manual priming pump)
Compared with traditional pneumatic diaphragm pumps, the high-efficiency and energy-saving electric drive mode. Can reduce energy consumption by up to 5 times
| Specifications | Maximum working pressure (bar) | Maximum head (m) | Maximum flow rate (m3/h) | Maximum particle diameter (mm) | Power (kw) | Common pump types |
| 1" | 4.5 | 45 | 4.5 | 3.2 | 1.5 | E10SAXXX |
| 1-1/2" | 4.5 | 45 | 10 | 6.5 | 3 | E15SAXXX |
| 2" | 4.5 | 45 | 20 | 6.5 | 4 | E20SAXXX |
| 3" | 4.5 | 45 | 32 | 10 | 5.5 | E30SAXXX |
Payment
GLOYEL accept different kinds of payment,such as T/T, L/C, Western Union, Money Gram.
Shipment
GLOYEL has established long-term and reliable cooperation with professional packing and shipping company.
