Audited Supplier
E-260
1 Year
Pre Milling, Gluing, Edge Banding, End Trimming, Fine Trimming, Scraping, Buffing
Linear Edge Banding Machine
0.4-3mm
Automatic
16m/min
CE, ISO
10-60mm
150mm
60mm
Glue Tank Underneath
Customized
24-Hour Online Service
5.98kw
White
380V
50Hz
950kg
100mmx3
0.6MPa
TQS
Plywood Package
4090*680*1235mm
China
84659900
Product Description
| Model | E-260 | ||
| Board length | ≥150mm | Input voltage | 380v |
| Board width | ≥60mm | Input frequency | 50HZ |
| Board thickness | 10~60mm | Output frequency | 200HZ |
| Tape width | 12~65mm | Total motor power | 10.35Kw |
| Tape thickness | 0.4~3mm | Air pressure | 0.6pa |
| Feeding speed | 16~23m/min | Phase | 3 |
| Workbench height | 900mm | Dust exhaust hole | 100mm×4 |
| Dimension | 5450*680*1235mm | Weight | 1250kg |
Machine Body
- Machine body has been solid welded by the laser cutting steel, and did the heat treatment, to ensure the structure stability.
- Main beam adopts Aluminum profile structure with electrical elevating, which is uniform and rigid.
Control Panel
Adopts 7 inch touch screen, which integrated the following functions:
Adopts 7 inch touch screen, which integrated the following functions:
- Function control
- Beam elevating
- Parameter setting
- Temperature controller
- Alarm details
Separating Spray
Before the pre milling function, the machine equipped with one separating spray device, which will isolate the dust and adhesive on the board surface, which will be easy to remove them.
Before the pre milling function, the machine equipped with one separating spray device, which will isolate the dust and adhesive on the board surface, which will be easy to remove them.
Pre-milling Structure
- Two pieces 2.2KW high speed motor, to do the joint trimming before the gluing, to reduce the adhesive mark on the edge.
- Through adjusting the feeding fence position, we can adjust the milling amount.
- Two pieces PCD cutter:φ125mm x φ30mm x H35mm
- Come with dust blower device
- With individual dust exhausting hood
Glue Pot Structure
The machine underneath glue pot, adopts screw type extracting structure. The amount of adhesive is adjusted via pneumatic cylinder.
The machine underneath glue pot, adopts screw type extracting structure. The amount of adhesive is adjusted via pneumatic cylinder.
End Cutting Unit
- Two pieces 0.37kw high speed motor with 200Hz frequency and 12000rpm rotation speed
- The motor come with manual rotating device, which can adjust the angle easily.
- Saw blades size:104*2.6*22*24Z
Fine Trimming Unit
- Two pieces 0.75kw high speed motor with 200Hz frequency and 12000rpm rotation speed
- Motor angle is adjustable
- With individual dust exhausting hoods
Scraping Unit
- Scraping cutter with R2 radius
- With the air blower device
Cleaning Spray Device
With the special cleaning agent spray device, which can help the buffing unit to clean the leaking adhesive on the board surface.
With the special cleaning agent spray device, which can help the buffing unit to clean the leaking adhesive on the board surface.
Buffing Unit
- Considering the dual-glue pots structure, the machine comes with double buffing unit, to meet the different color polishing.
- Can do the board edge polishing, and remove the leaking adhesive mark on the surface.
Automatic Lubrication Pump
Which will do the automatic lubrication to the linear guide way on the end cutting unit, to extend the using life of the structure.
Which will do the automatic lubrication to the linear guide way on the end cutting unit, to extend the using life of the structure.
Low-voltage apparatus
3.Delta PLC is from Taiwan.
4.Brand parts will ensure the safety and stability of the control system.
1.Input power: 3~380v,50hz
2.Circuit brake, 24V power supplier and AC contactor are from Schneider France.3.Delta PLC is from Taiwan.
4.Brand parts will ensure the safety and stability of the control system.
Options
The latest appearance design of the edge bander.
Also can do the OEM for your side.
The latest appearance design of the edge bander.
Also can do the OEM for your side.
Options
10inch Touch Screen
Adopts 10 inch touch screen, which integrated the following functions:
10inch Touch Screen
Adopts 10 inch touch screen, which integrated the following functions:
1.Function control
2.Parameter setting
3.Temperature controller
4.Alarm details
Options
Vertical glue pot
The machine adopts vertical glue pot, which can process the adhesive like EVA and PUR.
Vertical glue pot
The machine adopts vertical glue pot, which can process the adhesive like EVA and PUR.
1.The glue pot come with two pieces individual glue buckets.
2.With quick changing design, to enhance the working efficiency.
1. What's your guarantee? Which type after sale service can you provide to us?All the machine, we can offer the 1 year guarantee to our customers; any parts damaged due to the quality issue, we will send the parts via DHL, Fedex or air shipment urgently.
After sale service: if you purchased our CNC nesting center or edge bander, and we don't have any dealer or agent in your region, we will send our engineer to your site for installation and training ( you should pay the round-trip flight ticket, salary of engineer- each day 100.00USD, also take charge of the local accommodation. ). Considering the situation, we can do the online training. Also any small issues, you can knock us online, we will offer the rapid action to your concerns.
2. Which type payment term can you accept? How could we keep our capital safe?
We can accept the T/T and L/C at sight. We have more than 10 years exporting experience, so we know more about the capital safty concern of our customer. We will offer the video call or pictures to your side, during our loading, then you can check what we have done for the loading, if any cheating, then you can control your payment (T/T or L/C).
3. What is the leading time, if we did the payment to your side?
The leading time of most common machines, will be 10-25 days after collecting the down payment / copy of L/C. Specially designed production will take little bit longer time.
4. Can you accept some O.E. M service to us? or any other service could you do for us?
We have more than 15 years experience in the woodworking machinery industry, also have more than 5 experienced engineers, so we can do the special design according to your requirement.
Also, our exporting team has more than 10 years of experience in this field, so they can help you to purchase relevant products, parts, or tools, which can save your time and your cost.
