Audited Supplier
AISI, JIS, ASTM, DIN, BS, GB
Cans, Easy Open Ends, Bodies, Crown Corks or Caps
Cutomized
Bright / Stone / Matte / Melted
Mr / L / D
DOS-a
0.13 ~ 0.49
Ts / Th / T / Dr
Ba / Ca
300 / 310 / 311
Runfei Steel
China
72101200
Product Description
ETP & TFS Electrolytic Tinplate Tin coated steel coil sheet plate
Product introduction
Steels for packaging are thin gauge flat carbon steels, tin or chromium coated on both sides. This particular combination gives the tinplate an interesting set of properties: strength and stiffness, formability, welding ability, lacquer ability and printability, good cosmetic appearance and corrosion resistance. These properties bring appropriate response to all the necessary requirements: content protection during stocking and transportation, safe food preservation, printed information for the final user, ease of use, sustainability and environmental friendliness. Mass production of tinplate for canning human food started in year 1810, when Nicolas Appert wrote a famous book describing the technique of sterilization (also called "appertization") to preserve the food and when Peter Durand patented the same year the use of metal cans for the foodstuffs. Since then, tinplate has constantly taken advantage of dramatic improvements, especially over the past decades: improvements of the steel production processes (lower melting residuals and better inclusion cleanliness, switch from ingots to continuous casting, better temperature controls during hot rolling, high precision cold rolling), improvements of the coating process (hot dip tinning replaced by electro tinning to reduce the thickness of the tin layer), improvements of lacquers to increase the corrosion resistance, switch from soldering to electric welding for the can bodies. Unlike any other packaging material, steel is 100% infinitely recyclable and recycled. Thanks to its magnetic properties, steel packaging is the easiest and most economical type of packaging to sort and recover for recycling. Regardless of how many times it is recycled, steel loses none of its strength or inherent properties. 
Product specificationsCoating
As mentioned earlier, there are two types of Steel for Packaging, depending on the metallic coating:
• Tinplate with a tin coating and, in most of the cases, a passivation layer made of Chromium compounds
• Electro Chromium Coated Steel (ECCS) or Tin-Free Steel (TFS) with a coating made of Chromium compounds
The choice between these two products is sometimes imposed by the type of packaging or guided by the aimed aspect or by the product to be packed.
Tin coating
Tin coating is usually a three-stage process:
1. electro tinning
2. tin flow-melting (optional)
3. chromium passivation (optional)
Passivation
The tinplate surface is in most cases passivated to stabilize the surface, typically by preventing the growth of tin oxides. The most common is passivation 311. It is an electrochemical treatment in a bath of sodium dichromate to deposit both metallic chromium and chromium oxide on the tin surface. We are also proposing passivation 310, a lighter version of passivation 311, when a better lacquer adhesion is required.
Chromium coating
Chromium coating was primarily developed as an economic alternative to tin coating. It is an electrolytic treatment in a bath of chromic acid to deposit metallic chromium and chromium oxide on the blackplate. The usual name is Electro Chromium Coated Steel (ECCS) or Tin-Free Steel (TFS). TFS is excellent for lacquer adhesion and must always be lacquered both faces before use. TFS is not suitable for welding or soldering. Its appearance is less attractive (lower brightness) than tinplate. The absence of tin makes TFS non appropriate for acidic food (pH < 4) because of lower corrosion resistance
Oiling
Oiling is necessary to reduce friction and scratches while handling the sheets. The three most common oil types are:
• DOS = dioctyl sebacate
• BSO = butyl stearate
• ATBC = acetyl tributyl citrate
Mechanical properties
| Standards | ASTM,CE,EN10202,JIS G3315,GB24180 |
| Material | MR,SPCC,SPHL,L |
| Thickness | 0.12-0.6mm(Tolerance -/+0.005mm) |
| Width | 600-1200mm(Tolerance -/+0.2mm) |
| Tin Coating | 2.8/2.8,2.8/5.6,5.6/5.6,5.6/11.2,11.2/11.2 etc |
| Hardness | T2-T5,DR8,DR9 |
| Surface Finish | Bright,Stone,Silver,Matte,Mirror |
| Annealing | BA(Batch annealing) & CA(Continuous annealing) |
| Coil ID | 508mm or 610mm |
| Coil Weight/Pallet | 3-6MT |
| Packaging | Waterproof paper and Metal cover with corner protected. |
| Application | Bottle,Lid,Can body,EOE tabstock,Ink container,General draw can,Household lines,Electrical components,other food and paint box packing and other |
Our Advantages
We have over 10 years professional export experices.
Professional in Tinplate produce and export only.
Good quality,very competitive price,Reliable Service
Samples can be offered in free.
The DP,CIF,CFR,FOB items are very master and professionals.
Your money is safe by our business with T/T or L/C of China bank.
Control core products and resources and develop with you together.
Your logo can be OEM by us and supply strong business helps.
Help you to plan and open the new and big markets and supply new business.
RFQ
Q1: Where is your warehouse located? How can I visit your company?
A1: Our warehouse is located in Tianjin, about 10min drive from our office. All our clients, from home or abroad, are warmly welcome to take a visit here!
Q2: How does your company do regarding quality control?
A2: Quality is very important and always be put at the first place. SLM team members always pay great attention to quality controlling from the very beginning to the end.
Q3: Can I get some samples?
A3: Yes, sure, we are honored to offer you samples, moreover we offer video online.
Q4: What is your method of Transportation?
A4: We deliver by shipping, container, break bulk or as your requirements.
Q5: What's your Payment method supported?
A5: We accept T/T, L/C at sight etc.
Q6: What about your Warranty?
A6: It's 1 years warranty.
