Audited Supplier
1. Main technical conditions of the forming line:
Temperatura: -10 ºC ~ 35 ºC(Temperature:-10ºC~35ºC)
Voltage:110volt 60Hz or 220volt 60Hz(or according to customer request
Air pressure:0.6~1.2Mpa
Total Power:≈4.5kw)
Color:
Production capacity:0-15meters/min(without cutting)
Dimension (L*W*H): L≈ 1.6 m, W≈ 1.5 m, H≈ 1.2 m
1. Flow Chart of roll forming machine:)
2. Main components:
| No. | Components Name | Unit Set/Pcs | Marks |
| 1 | 3-4 tons manual uncoiler | 1 | |
| 2 | Feeder | 1 | |
| 3 | Roll Forming Machine | 1 | |
| 4 | Electrical control system | 1 | |
| 5 | Hydraulic Guillotin | 1 | |
| 6 | Electric seamer | 1 | |
| 7 | Receiving table | 1 | |
| 8 | Bending machine | 1 | |
| 9 | Spare parts | 1 | |
| 10 | Technical Manual | 1 | |
| 11 | Customized container | 1 |
3.Photos of Machine:
Manual cutting standing seam roll former
Auto cutting standing seam roll former
4. Technology parameters:
The weight of the machine is about 1.8tons)
The total dimension of machine:2500(L)*1500(W)*1200mm(H)
4.1 4 TONS Manual uncoiler: 1SET
Capacity of uncoiler:3-4tons
Expansion of segment:manual
Rotation of segment:manual
Number of segment:4
Range of segment expansion:480-520mm
4.2 Feeding
Entrance and adjustable wheel
Qty: 1
4.3Main forming machine
It adopts a steel wall structure with chain transmission.
The machine base is made of welded steel with destressing treatment
Coil thickness:0.5-0.8mm
Main motor type: 3-phase asynchronous motor
Main motor power: 2.2KW
Forming speed: 0-15m/min(without cutting)
Approx.6 groups rollers)
Roller : S45C with heat treatment, and the surface is being hard chrome coated)
Shaft: Shafts of rollers are tooled by a grinding machine two times to ensure the precision of the final product.
Transmission type: by gearbox and chain
Qty: 1
4.4Hydraulic System:
Material of blade: Cr12
Length measuring: Automatic encoder length measuring
Way of cutting: The main machine automatically stops and the cutting will take place. After the cutting, the main machine will automatically start
4.5Product support frame
Size:L 3m x W .0.7m
Qty:2
4.6PLC Control System
(The whole line is controlled by PLC and touch screen. The PLC system is with a high-speed communication module, it is easy to operate.The technical data and system parameters can be set by touch screen.)
Control the quantity & length& cutting length automatically)
The Machine will be stopped while it is cutting
Automatic Length measurement and quantity counting (precision 3m+/-2mm)
Voltage:110volt 60Hz or 220volt 60Hz (As per buyer`s request)
4.7Auto seamer:
| No. | Item | Parameter | Remark | |
| 1 | Suitable material | Type | Color steel, galvanized steel | |
| Thickness(mm) | 0.35-0.8mm | Test material standard 0.45mm | ||
| Yield strength (Mpa) | ≤300mm | |||
| Width (mm) | according to design | |||
| 2 | Forming speed | About 10-15 m/m | Not include cutting time | |
| 3 | Motor of forming system (kw) | 4kw | Depends on final design | |
| 4 | Hydraulic station power(kw) | 2.2kw | Depends on final design | |
| 5 | Voltage requirements | AC380V, 50Hz, 3phase | According to the customer's request | |
| 6 | Roller material | #45 steel with heat treatment 58-62 degrees | ||
| 7 | Shaft diameter | 70mm solid | ||
| 8 | Control system | PLC with touchscreen | Delta brand | |
