Audited Supplier
Tooling paste description
- Thixotropic tooling paste, specific for the surface moulding with CNC milling on wooden supports, MDF, compounds, fiberglass, PU foams and sealed polystyrene.
- Easy to applied, it allows to obtain thin or thick thicknesses,fast harden.
- Easy to obtain excellent surface finishes already at the end of the mechanical process.
- Small defects can be repaired through machine or hand after milling.
- Low density.
- Epoxy resin base.
- Have a throughly mixing till white disappear by hand or a planetary mixer follow by the indicated ratio.
- To make the adhesion of the paste on its support.Strong propose to apply a thin epoxy resin coat first prior to apply tooling paste epoxy resin.
- Have 10-15hrs post cure at room temperature before milling.
Safety attention
- Sure enough ventilation for the workshop and the workers should be wear gloves, safety glasses and waterproof clothes.Feel free contact us or consult SDS if further information.
Package
16kg for a package(8kg resin + 8kg hardener separately)
Shelf life
- 12months without mixing since manufacture date.
Paste characteristics
| Item | Resin | Hardener | Mixture |
| Ratio by weight | 100 | 100 | / |
| Appearance | White Paste | Pink Paste | Pink Paste |
| Specific gravity at 25°C (g/cm3) | 0.50-0.55 | 0.40-0.50 | 0.45-0.55 |
| Pot life for mixture at 25°C ( 500 g) | / | / | 55-75mins (PET115°C ) |
| Application thickness propose | / | / | 10-40mm |
| Hardening time to milling (20-25mm) at 25ºC | / | / | 10-15hrs |
Cure property of mixture
| Item | Testing method | Value |
| Hardness(Shore D) | ISO 868:2003 | 52MPa |
| Flexural strength | ISO 178:2001 | 16MPa |
| Flexural modulus | ISO 178:2001 | 1.9GPa |
| Compressive strength | ISO 604:2002 | 20 |
| Glass transition temperature(Tg) | ISO 11357:2002 | 70ºC |
| Coefficient of Thermal Expansion(10-6.K-1) | ISO 11359:1999 | 25 |
- Tooling gel coats are formulated specifically for mold making. These series contain both special polyester and vinyl ester products.
- Skin coat.Superior mold cosmetics can be achieved by using a skin coat with hybrid vinyl ester resin behind the gel coat. Be applied after the gel coat application and offer good protection from fiber-print and distortion on the gel coat surface in order to increase mould turnaround time.
- A full line of tooling resins for all methods of tool manufacture. These products include a vinyl ester and a series of low profile resins. The vinyl ester resin can be used as skin and bulk materials in the conventional mold building process. This process consists of daily single ply lamination until the required mold skin thickness is achieved.
| Application | Procedure | Product type | Description |
| Master mold(Plug) construction | Frame construction | Epoxy | Atmospheric temperature |
| Polyester | styrene free version | ||
| Tooling paste | Epoxy | Low density, hand up/extrude | |
| Unsaturated polyester | Low styrene, spray/extrude | ||
| Vinyl ester | High HDT, Low styrene, spray & extrude | ||
| Surface finish | Sanding Gelcoat | Easy sanding, good gloss | |
| High gloss Gelcoat | High gloss | ||
| Female mold construction | Tooling Gel coat | ISO | High HDT, Good gloss |
| Vinyl ester resin | High gloss recovery | ||
| Vinyl ester resin | High HDT/gloss retention | ||
| Skin coat | Vinyl ester resin | Low shrinkage | |
| Vinyl ester resin modified | Low shrinkage, thin lamination | ||
| Traditional bulk resin | ISO unsaturated polyester resin | HDT:130ºC | |
| Vinyl ester resin | High elongation | ||
| Vinyl ester resin modified | Low shrinkage | ||
| Low profile controlled resin | filled | Low shrinkage/profiled | |
| Un-filled | Low shrinkage/profiled, High HDT. |
We focus on composites resin business and have a tolling plant in Changzhou city. We can supply all kinds of modified resin to feed up your solutions for composites. The business covers the total composites industry.
Q1:Do you provide sample for the trial?
A1:We could supply small size package for free.but we have to charge the freight.
Q2.Could you supply customized products friendly?
A2: Yes,we do.We have a team to sever in Fortune 500 and be able to supply products to satisfied with the end-users' technical requirement.
Q3. What about your lead time?
A3: Generally 2-4weeks after the order confirmed.
Q4. What are your terms of payment?
A4:Usually we do EXW, FOB, CIF, and DDP.
