Audited Supplier
Other
Model Number:
JTSJM-150
1 Year for machinery warranty|1 Year for Core Components
Support Sea freight
Lead Time:
| Quantity(Sets) | 1 - 1 | >1 |
| Est. Time(days) | 30 | Negotiable |
Customization:
Equipment composition
Heaters, separators, condensers, preheaters, vacuum systems, heat pumps, electrical meters, control cabinets, etc. 304 or 316L is determined according to the material process requirements.
Features
1. The material has a short residence time in the heating tube, which is especially suitable for the concentration of heat sensitive materials, and can be continuously fed and continuously discharged.
2. The evaporation temperature is low, and the efficiency and evaporation temperature can be selected according to customer requirements.
3. Heating the evaporator top spray film device is unique, and the film formation is uniform.
4. The condenser has a unique structure. a large heat transfer coefficient and good effect.
5. The injection heat pump is adopted, and the energy saving effect is obvious.
6. According to customer requirements, both automatic control and manual control can be adopted.
Main parameters
| Model | JTSJM-150 | JTSJM-250 | JTSJM-500 | JTSJM-1000 | JTSJM-1500 |
| Capacity(Ethanol)(L/H) | 150 | 250 | 500 | 1000 | 1500 |
| Evaporate temperature(ºC) | 65-75 | 65-75 | 65-75 | 65-75 | 65-75 |
| Heater Jacket pressure(Mpa) | <0.3 | ||||
| Condenser Pressure(Mpa) | <0.3 | ||||
| Heat trans surface(m²) | 6.5 | 30 | 30 | 55 | 80 |
| Condenser surface(m²) | 9.5 | 35 | 35 | 65 | 100 |
| Steam consumption(KJ/H) | 250000 | 795000 | 795000 | 1600000 | 2390000 |
| Cooling capacity(Kcal/H) | 8200 | 23500 | 23500 | 4500 | 67000 |
| Vacuum pump power(KW) | 3 | 7.5 | 7.5 | 11 | 15 |
| Circle pump flow capacity(T/H) | 6 | 20 | 20 | 40 | 60 |
| Dimension(mm) | 1600*1200*3550 | 2600*1600*5900 | 2600*1600*5900 | 3200*1800*7800 | 3500*2200*9500 |
