Audited Supplier
| Parameters | Turbo 100 | Turbo 125 | Turbo 150/Turbo 160 | Turbo 200 | Turbo 250 | Turbo 315 | ||||||
| Speed | min | min | min | max | min | max | min | max | min | max | min | max |
| Voltage [V] | 1~230 | 1~230 | 1~230 | 1~230 | 1~230 | 1~230 | 1~230 | 1~230 | 1~230 | 1~230 | 1~230 | 1~230 |
| Frequency [Hz] | 50/60 | 50/60 | 50/60 | 50/60 | 50/60 | 50/60 | 50/60 | 50/60 | 50/60 | 50/60 | 50/60 | 50/60 |
| Power [W] | 23 | 25 | 25 | 29 | 42 | 50 | 76 | 108 | 125 | 177 | 227 | 315 |
| Current [A] | 0.10 | 0.11 | 0.11 | 0.13 | 0.19 | 0.22 | 0.34 | 0.48 | 0.54 | 0.79 | 0.99 | 1.42 |
| Maximum air flow [m3/h(l/s)] | 170(47) | 230(64) | 230(64) | 345(96) | 430(119) | 560(156) | 805(224) | 1080(300) | 1070(297) | 1360(378) | 1420(394) | 1750(486) |
| RPM[min-1] | 1980 | 1535 | 1535 | 2265 | 1940 | 2620 | 1915 | 2380 | 1955 | 2440 | 2115 | 2505 |
| ound pressure level at 3 m [dBA] | 27 | 29 | 29 | 34 | 32 | 44 | 39 | 45 | 44 | 51 | 41 | 52 |
| Max. transported air temperature [ºC] | +60 | +60 | +60 | +60 | +60 | +60 | ||||||
| SEC class | C | B | B | B | - | - | ||||||
| IP rating | IPX4 | IPX4 | IPX4 | IPX4 | IPX4 | IPX4 | ||||||
| Motor IP rating | IPX4 | IPX4 | IPX4 | IPX4 | IPX4 | IPX4 | ||||||
| ErP | - | - | - | 2018 | 2018 | 2018 | ||||||
o The casing is made of low-flammable polypropylene.
o Ventilation unit with terminal box. Can be turned to any position.
o Special design of the casing permits easy dismantling of the impeller and motor block for fan servicing without dismantling the air duct.
Motor
o Two-speed single-phase motor on ball bearings.
o Equipped with thermal overheating protection.
Speed control
o The control (minimum speed, maximum speed and shutdown) is executed with the integrated three-position switch (US modification) or with the
external switch for multi-speed fans (specially ordered accessory).
o Smooth speed control is possible with a built-in speed controller (FR1 modification) or an external thyristor speed controller (available upon separate order).
o Due to the compact design the fan is the ideal solution for mounting in limited spaces, including space behind a false ceiling.
o The fan can be installed in any section of the ventilation system from intake to the end of the ductworks.
o Wall or ceiling mounting with a mounting plate.
o TD: mounting kit for installation of one diameter fans in parallel (for boosting capacity)
o TL: mounting kit for installation of one diameter fans in series (for boosting pressure).
o T: turn-off delay timer adjustable from 2 to 30 minutes.
o US: three-position speed switch.
o FR1: smooth speed controller adjustable from 0 to 100 % and power cable with mains plug.
o G1: speed controller, temperature controller with external temperature sensor (cable length 4 m), power cable with mains plug.
o GT1: speed controller, temperature controller with external temperature sensor (cable length 4 m), 5 min timer switch and power cable with mains plug.
o GI1: speed controller, temperature controller with integrated temperature sensor and power cable with mains plug.
o GTI1: speed controller, temperature controller with integrated temperature sensor, 5 min timer switch and power cable with mains plug.
o The G1 and GI1 modifications enable automatic speed control depending on indoor temperature. The optimal ventilation solution for premises requiring permanent temperature control as greenhouses, orangeries, etc.
o W1: power cable with mains plug.
| Designation key | ||
| Series | Duct diameter [mm] | Modifications |
| Turbo | 100;125;150;160; 200;250;315 | T : turn-off delay timer adjustable from 2 to 30 minutes US : three-position speed switch FR1 : smooth speed controller adjustable from 0 to 100% and power cable with mains plug G1 : speed controller, temperature controller with external temperature sensor, power cable with mains plug GT1 : speed controller, temperature controller with external temperature sensor, 5 min timer switch and power cable with mains plug GI1 : speed controller, temperature controller with integrated temperature sensor and power cable mains plug GTI1 : speed controller, temperature controller with integrated temperature sensor, 5 min timer switch and power cable with mains plug W1 : power cable with mains plug |
Q1: Wonder if you accept small orders?
A1: Do not worry. Feel free to contact us .In order to get more orders and give our clients more convener ,we accept small order.Q2: Can you send products to my country?
A2: Sure, we can. If you do not have your own ship forwarder, we can help you.
Q3: Can you do OEM for me?
A3: We accept all OEM orders,just contact us and give me your design. We will offer you a reasonable price and make samples for you ASAP.
Q4: What's your payment terms ?
A4: By T/T,LC AT SIGHT,50% deposit in advance, balance 50% before shipment.
Q5: How long is your production lead time?
A5:It depends on product and order qty. Normally, it takes us 15 days for an order with MOQ qty.
Q6: When can I get the quotation ?
A7: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation. Please call us or tell us in your mail, so that we could regard your inquiry priority.
Q7: Is Blauberg a Chinese Brand?
A7: We are a branch company of Blauberg Group. Blauberg Group is a Germany company. Our headquater is in Munich , Germany. Chinese factory is the main production plant of Blauberg Group.
