Audited Supplier
JONSN HT series high viscosity drum pump is specially designed for middle-high viscosity liquid, adopts JONSN traditional easy disassembly structure design, this design's advantage is easy washing, can deliver glycerin, glue, oil paint, latex, all kinds of resin and polymer etc.
Matching different motor can deliver different viscosity medium, max. delivered viscosity can reach 15,000cps.
Product parameters
4. Max. Visocisty: 0-15000cps
5. Pump OD: 51mm
8. Seal type: Mechanical seal
9. Impeller: Single screw
8. Immersion length: 1000mm, 1200mm or customize
Features:
Security: Designed with a non-leakage, high pressure shielding structure, the PT drum pump is safe to use and able to convey all kinds of hazardous material.
Practicality: Portable with a total weight 4-8kg for pump & motor; The PT pump has a high performance closed impeller, enabling it to empty a standard 200L drum in 2-3 minutes.
Versatility: Standard quick-fit 1" connector or quick-fit G1 thread structure, suitable for all types of connectors, complete with accessories to meet different demands
Reliability: The motor and pump tube adopt quick-alignment mounting structure and the modular construction design makes installation, dismantling for cleaning and maintenance easier without auxiliary tools. Dismantling and assembling can be completed in 5-10 minutes.
Environment Friendliness: No pollution to the environment.
3. Easy to replace and maintain: Motor and pump adopt adjustable installation structure; a pump can be replaced with different motors easily in 5-10mins.
4. Leakage-free and high pressure shielding design, ensure its safety for dangerous liquid transfer. And lower down its maintenance cost.
5. High performance & low cost: With decades years experience of international branded high quality pump, set factory in Ganzhou, Jiangxi, we optimize the design and production make it to be high performance with lower cost.
The HT series adopt sanitary structure for easy cleaning and replacement.
| MODEL | TYPE | POWER | SPEED | MOTOR PHASE | N.W | |
| PM750 | Electric motor | 750W | 3000rpm | single/three | 15kg | |
| PM1500 | Electric motor | 1500W | 1500rpm | three | 18kg | |
| PM2200 | Electric motor | 2200W | 1500rpm | three | 22kg | |
| BM750 | Explosion-proof motor | 750W | 3000rpm | three | 28kg | |
| BM1500 | Explosion-proof motor | 1500W | 1500rpm | three | 38kg | |
| BM2200 |
| 2200W | 1500rpm | three | 45kg | |
| AM1500 | Air motor | 1500w | 300-3000rpm | 18kg | ||
| AM3000 | Air motor | 3000w | 300-3000rpm | 20kg |
1. The motor performance defers from pumps tube matches, please check production parameters while choosing motor.
2. The rotating speed of air motor is affected by air source and pressure, thereby flow rate and head is affected.
3. Explosion-proof area shall use air motor or explosion-proof electric motor match with stainless steel pump, install potential grouding wire to prevent electrostatic sparks from causing explosions.
4. Pump match IEC single phase or three phases motor, normal or explosion-proof motor by adapter, or by Y or YB series B14 Flange. Or match air motor with standard connection.
| 1. Quick clamp | 6. Hose | 11. Hose with live joint | 16. Air filter |
| 2. Te-flon gasket | 7. Threaded hose connector | 12. Pump fixator | 17. Dosing gun |
| 3. Threaded quick connector | 8. Reducer union | 13. Equipotential ground wire | 18. Adaptor joints |
| 4. Hose quick connector | 9. Quick combination connector | 14. Stainer | 19. Drain pipe |
| 5. Hose clamp | 10. Flowmeter | 15. Wall mounting |
OUR SERVICE
