Audited Supplier
XJ-20/25/30/40
Support
Electric
New
CCC, PSE, RoHS, ISO, CE
12 Months
Single-Screw
FEP/PFA/ETFE Fluoroplastics Cable Extrusion Machi
28:1
Max.180m/Min
Siemens
NSK
Yaskawa
NEWTOPP
PE Film + Wooden Box
CE SGS
Dongguan City, China
8479400000
Product Description
FEP/PFA/ETFE High Temperature Insulation Wire Cable Extruder Machines Wire Extrusion Line
1.Application:Suitable for FEP(also called F46),PFA and ETFE(also called F40) fluorplastics high-frequency cable and coaxial cable extrusion production.
2. Machine Features:
1) Used Widely: Used in insulation extrusion for micro-fine coaxial wire or high-frequency single transmission wire and cale etc;
2) Steady productivity: Optimize design of the screw, make it durable, non coated chrome worn down, non conglutination, productivity steady;
3) High quality: Concentricity:over 93%; OD tolerance:±0.002;
4) Temperature control precise: Adopt SCR power controller or solid-state relay(SSR) , with imported high-quality temperature control table and copper casting heater, temperature zone of machine controlled within ±1ºC;
5) Operate easily: Exclusive adopt NEWTOPPspecialized touch screen, both provide Chinese/English operation interface, auto-control and auto-feedback, operate easily.
3. Technical Parameters:
| Model | XJ-20 | XJ-25 | XJ-30 | XJ-40 |
| Pay-off type | Active | Active | Active | Active |
| Pay-off bobbin | Φ100-200mm | Φ100-200mm | Φ200-300mm | Φ200-300mm |
| Screw diameter | Φ20mm | Φ25mm | Φ30mm | Φ40mm |
| Vacuum pump | 200W | 200W | 400W | 400W |
| Screw L/D ratio | 28:1 | 28:1 | 28:1 | 28:1 |
| Extrusion output | 5kg/h | 8kg/h | 12kg/h | 30kg/h |
| Main power | 3kw Servo motor | 4kw Servo motor | 7.5HP Servo motor | 10 Servo motor |
| Extrusion OD | Φ0.2-0.6mm | Φ0.3-0.8mm | Φ0.3-1.5mm | Φ0.8-2.5mm |
| Cooling device | U-type single-layer water trough | |||
| Accumulate length | 0-100m | 0-100m | 0-100m | 0-100m |
| Capstan power | 1kw Servo motor | 2kw Servo motor | 2kw Servo motor | 2kw Servo motor |
| Max speed | 150m/min | 150m/min | 180m/min | 180m/min |
| Take-up type | Double shaft | Double shaft | Double shaft | Double shaft |
| Take-up power | 3HP | 3HP | 4HP | 3HP |
| Take-up bobbin | Φ100-200mm | Φ200-300mm | Φ200-300mm | Φ300-400mm |
| Size( L*W*H) | 8000*1200*2100 | 8000*1400*2100 | 9000*1400*2100 | 12000*1800*2100 |
| Total Weight | 3.0 T | 3.5T | 4T | 5.5T |
1) Single bobbin active type pay-off stand
2) High frequency induction preheater
3) Wire straightening unit
4) Main extruder
5) Electric control cabinet
6) Special crosshead
7) Vacuum pumping and adjustment control device
8) Movable water trough
9) Single layer cooling water trough
10) High precision Horizontal wire accumulator
11) Single wheel type belt capstan
12) Double-shaft type take-up machine
13) Laser OD tester
14) Convex-concave tester
15) High frequency spark tester
16) Underwater capacitance tester
17) LED electronic display board
5. Safety performances:
1) Switch-off at overpressure
2) Disabling signal at under temperatures
3) Stop at over temperature
3) Motor power limit
4) Emergency stop
5) Monitoring of tolerances and alarms
6) Monitoring of sensors
6. Machine pictures:
7.Packaging & Shipping:
8.Our Services:
1) Free technical consulation for machine configuration and model selection etc.;
2) Free training for machine operation and daily maintenance;
3) Improve the design to the operator's requirements;
4) Cost price for required parts in lifelong period;
5) Provide overseas technical support and services.
9. About us:
Dongguan NewTopp Electrical Machinery Co.,Ltd is a high-tech enterprise which specializes in developing and manufacturing wire and cable machines, and our main products includes all kind of extrusion production line, single twisting machine, double twisting machine, cantilever stranding machine, cage-type twisting machine, planetary cabling machine, triple-core stranding with back-twist and taping, and single layer/double layer taping machine etc. and our products have passed CE certification and SGS audited , and we also have passed ISO9001:2015.
10.FAQ:
We are a manufacturer with more than 10 years of R&D and manufacturing experience in the field of cable machiner, there are more than 6000 square meters of workshop and office space in our factroy. welcome come to visit our factory at any time.
2) How can we get to your factory to see the machines?
Add: No.286 Huai'de road, Humen Town, Dongguan City,Guangdong Province,China.
Only 40 minutes by car from Shenzhen Baoan International airport to our factory;
Only 2.5 hours by car from Guangzhou Baiyun Airport to our factory;
Only 17 minutes by high-speed rail from Guangzhou south station to Humen.
