Audited Supplier
HT 1HP - 5HP Vertical Pump for Waste Gas & Chemical Fluid
Features and Benefits:
1. With PVC flange, 2 grade energy efficient motor, 3 Phase Moter, 0.75KW to 11KW,
2. Dry-running without damage.
3. Molded parts are out of FRPP, CFRPP , PVDF applicable for various chemicals.
4. Shaft seal stops corrosive vapor to reach the motor bearing perfectly.
5. Closed impeller, fastened independent of rotational direction .
6. Shaft is separated from the chemicals by a plastic protective tube.
7. Radial and axial forces are absorbed by reinforced motor bearings.
8. Double protections of corrosion resistance to paint coat.
Identification for Model No. :
Model Desc.: HT - 50 VK 5 - 5 V P 1 2 3 4 5 6 7 |
| 1. Type: HT |
| 2. In-Outlet: 40-1-1/2" 50-2" 65-2-1/2" 80-3" |
| 3. Gravity: VK-1.1 VP-1.4 |
| 4. Power: 3-3HP 5-5HP 7.5-7.5HP 10-10HP |
| 5. Frequency: 5-50HZ 6-60HZ |
| 6. O-ring: V-VITON E-EPDM N-NBR |
| 7. Pump body material: P-FRPP K-P |
Datasheet:
| Model No. | In-Outlet(mm) | Phase | HP | 50HZ Max. Head(m) | 50HZ Max. Capacity (L/min.) | 60HZ Max. Head(m) | 60HZ Max. Capacity(L/min.) |
| HT-40VK-1 | 50x40 | 3 | 1 | 16.5 | 280 | 13 | 250 |
| HT-40VK-2 | 50x40 | 3 | 2 | 20 | 400 | 23 | 320 |
| HT-40VK-3 | 50x40 | 3 | 3 | 24 | 450 | 28.5 | 390 |
| HT-50VK-3 | 65X50 | 3 | 3 | 23 | 530 | 23 | 520 |
| HT-50VK-5 | 65X50 | 3 | 5 | 31 | 580 | 36 | 560 |
| HT-65VK-5 | 80X65 | 3 | 5 | 29 | 600 | 29 | 740 |
| HT-65VK-7.5 | 80X65 | 3 | 7.5 | 32 | 780 | 37 | 960 |
| HT-65VK-10 | 80X65 | 3 | 10 | 32 | 970 | 39.5 | 1000 |
| HT-40VP-3 | 50X40 | 3 | 3 | 22 | 400 | 23 | 340 |
| HT-50VP-3 | 65X50 | 3 | 3 | 19 | 500 | 16.5 | 415 |
| HT-50VP-5 | 65X50 | 3 | 5 | 28 | 560 | 32.5 | 500 |
| HT-65VP-5 | 80X65 | 3 | 5 | 27 | 580 | 25 | 600 |
| HT-65VP-7.5 | 80X65 | 3 | 7.5 | 31 | 750 | 35 | 750 |
| HT-65VP-10 | 80X65 | 3 | 10 | 31 | 780 | 38 | 760 |
| HT-100VK-15 | 100X100 | 3 | 15 | 35 | 1710 | 35 | 1950 |
