Audited Supplier
(W~ha~ts~Ap`p+86 18~56~1~39`~09~0`8)
Equipment Characteristics
1.By the well type tank nitriding furnace as the main body
using hydrogen analyzer and intelligent instrument for nitrogen potential control, and equipped with nitriding expert system software, the whole process is controlled by computer, process parameters control, high degree of automation, easy to operate.
Electric heating multi-zone synchronous control technology, one button operation again, the whole process record, automatic and efficient completion;
Constant current, constant voltage, constant power control technology, according to different load characteristics, effective protection of power failure caused by damage to the load;
Multiple time curves can be set, and the total number of curves is up to 50 segments;
Two program setting modes of "given value + time value" and "heating section + constant temperature section" are optional;
All parameters can be set by key, and the data is automatically saved without loss;
2.English operation interface
Touch screen integrated control, English interface, simple operation;
3.Furnace body seal
The sealing fan for the all-fiber furnace cover and the integrated air-cooled furnace adopts double sealing for the furnace cover and the furnace mouth. The outer side adopts high temperature resistant silicone strip and the inner side adopts asbestos rope heat insulation to effectively protect the high temperature silicone strip and the gas sealing property is good. The unique design of water circulation cooling system is adopted to effectively protect the sealing silicone strip to ensure its service life.
4. Furnace cover lifting system
The furnace cover lifting adopts electric lifting, simple operation, no hydraulic lifting oil leakage phenomenon.
5. high furnace uniformity
The unique power distribution method is used to ensure that the furnace temperature uniformity meets the process requirements, and the furnace uniformity can reach ±10ºC;
6. safety protection device
The overtemperature controller is used to monitor the upper limit temperature in the furnace, and automatically cut off the power supply when overtemperature is reached;
Support to turn off the output when the furnace door switch is off;
7. Intake and exhaust system:
The furnace cover is equipped with sampling tube, exhaust pipe and input tube on the upper side wall of the furnace can be used for ammonia input. The furnace tank and the furnace cover are sealed with water-cooled vacuum rubber and equipped with a compression bolt. The exhaust gas in the furnace is discharged out of the furnace through the exhaust pipe
| Model | Rated power kw | Rated voltage V | Rated temperature ºC | Working size mm | Temperature rise in empty furnace h | Maximum load kg | Weight kg |
| RN3-20-6 | 20 | 380 | 650 | Φ400×500 | ≤1 | 100 | 1500 |
| RN3-35-6 | 35 | 380 | 650 | Φ500×650 | ≤1 | 200 | 2000 |
| RN3-60-6 | 60 | 380 | 650 | Φ700×900 | ≤1 | 400 | 3000 |
| RN3-75-6 | 75 | 380 | 650 | Φ700×1250 | ≤1.5 | 550 | 3500 |
| RN3-80-6 | 80 | 380 | 650 | Φ900×1000 | ≤1.5 | 600 | 3500 |
| RN3-100-6 | 100 | 380 | 650 | Φ700×1800 | ≤1.5 | 800 | 4500 |
Shandong Runhai Machinery Technology Co., Ltd. registered capital of 10 million, the existing staff of 25 people, technical personnel 6 people, the factory covers an area of 3200 square meters, the annual production capacity of 50 million yuan, located in Weifang City, Shandong Province, the products involved in steel and metallurgy, aerospace, military medical, automotive and other fields.
The company actively carries out the development of scientific research projects, and introduces and absorbs the advanced technology of European and American countries, has accumulated rich experience in design and manufacturing, and has trained a strong technical research and development team and after-sales service guarantee team. The company's products are exported to Australia, Russia, Mexico, Hungary, Turkey, India, Malaysia, Indonesia, Thailand, Morocco nearly 20 countries and regions, has been praised by domestic and foreign customers.
The company's main products are: truck annealing furnace, forklift quenching furnace, tempering furnace, carburizing furnace, nitriding furnace, vacuum furnace, mold shell baking furnace, medium frequency furnace, precision casting equipment, sand casting equipment, shot blasting machine, cooling tower and other products.
The company always adheres to the purpose of quality first and customer first, and is willing to meet the needs of market competition and international economic globalization with high-quality products, reliable commitment and first-class service.
1.Are you manufacturer?
Yes, We are manufacturer.
Shandong Runhai Machinery Technology Co., Ltd. registered capital of 10 million, the existing staff of 25 people, technical personnel 6 people, the factory covers an area of 3200 square meters, the annual production capacity of 50 million yuan, located in Weifang City, Shandong Province, the products involved in steel and metallurgy, aerospace, military medical, automotive and other fields.
2. Can I ask for special design?
Of course,we offer customized services.
3. How about installation and commission overseas?
We can provide remote guidance and overseas services. If you need me arrange engineers to go to your factory to debug equipment,you just need to extra pay the engineer's travel expenses.
4.What can you buy from us?
Electric furnace, Molding equipment,Shell making equipment,Wax processing equipment,Roasting and casting equipment,Post-processing equipment or other equipment.
5. How long is the delivery time?
It usually takes 30 days, depending on the quantity.
6. What is the terms of payment?
We support T/T and L/C payment terms. you need pay by T/T advance 30% as deposit within 7 working days after signing contract and pay the balance 70% before delivery.
