Audited Supplier
SJ501
Product Description:
Aluminum-titanium sintered flux, basicity is 1.0, granularity is 10-40 mesh, bulk ratio: 1.2-1.5g /cm3. Ac or DC reverse connection is recommended. It is suitable for the occasions where the base material is not cleaned before welding, for the welding of low carbon steel, low alloy steel and heat-resistant steel, such as ships, boilers and pressure vessels, especially for the high-speed welding of thin plates, which has high requirements for the appearance of the weld.
Meet the standard:
AWS A5.17 F7A0-EL8
NB/T47018-2017
Scope of application:
With appropriate welding wire (such as H08A, H08MnA, H08MnMoA), it can weld low carbon steel and low alloy steel structures, such as ships, boilers, pressure vessels; Especially suitable for high-speed welding of thin plates.
Welding position:
Horizontal and horizontal welding
Note:
Prior to soldering, the flux must be baked at approximately 300-350 ° C (572-662 ° F) for 2 hours.
Before welding, it is necessary to remove rust, scale, primer and other impurities on the surface of the base metal to obtain excellent welding deposited metal.
In the case of multi-layer welding, the bottom welding of groove welding requires a small current and welding speed.
New flux is added regularly to prevent flux defects and poor bead surface forming caused by flux reuse.
Chemical composition of flux (wt%) Typical value:
| SiO2+TiO2 | CaO+MgO | Al2O3+MnO | CaF2 | S | P | |
| SJ501 | 32.11 | 19.05 | 37.67 | 8.9 | 0.019 | 0.031 |
Typical values of mechanical properties of deposited metal
| flux/wire | yield strength ratio (MPa) | strength of extension(MPa) | elongation (%) | V-notch impact toughness | class |
| SJ501/SU08A | 421 | 527 | 28 | 66@-20ºC | AWS:F7A4-EH14 |
To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.
FAQ
1. How do you ensure your product and service quality?
All our processes strictly adhere to ISO9001 procedures.And have 12months quality warranty and exchange service against Bl issue date forthe quality problem caused by our side.
2. Canyou provide several pieces of samples for testing before place mass order?
Yes,we are pleasure to send you samples to test the quality and performance.
3. How canImake order and settle payment?
Once clear your requirement and determined which product is ideal foryou,we will send Pl to you. L/C,D/P,T/T,Paypal, Western Union etc.are allavailable.
4. lf we find your bank account different as before how should we respond?
Please DON'T arrange the payment until double check with us.(Bank details will be listed in each piece of PI)
5. What about Delivery Date?
For sample order: 3-5 days after the requirement.For mass order: 15 days after confirm order.
6. What about Shipping?
We can send the small batches by express and the mass orders by LCL orFCL condition.To save logistics cost,you can either use your own nominated shippina aaent for the shipment.
