Audited Supplier
WD-010
Online Technical Support
15 Years
Modern
E0
Waterproof, Anti-Static, Thermal Insulation
CE / ISO
Household, Outdoor, Commercial, Fireproof
Customized
WPC Decking
Wood-Plastic Composite
60% Wood Fiber + 30% HDPE+ 10% Additives
Sanding,Brushing,Groove,Wood Grain,Co-Extrusion
Eco-Friendly Weather Resistant
Outdoor Construction
Square Hollow / Round Hollow / Solid
2.2m/2.8m/2.9m/3.6m/4m/5.8m/Customized
LT
Bubble Film with Pallet
Zhejiang, China
3918909000
Product Description
Advanges of Wood Plstic Composite
Natural Wood Texture,High Strength, Clean, Elegance Easy to Work,
Eco-Friendly, Ideal deco material for outdoors Water-proof,
Humidity-proof, Acid Base, Termite ProtectionHigh density,
Resistant,No Rotting, Non-deformation Durable Temperature
between -40 to +60 Centi Degree No Painting,No Glue and Low
Maintainence UV Protection,Stable ColorFully Environmental,
Recyclable, Saving Forest Resource
Natural Wood Texture,High Strength, Clean, Elegance Easy to Work,
Eco-Friendly, Ideal deco material for outdoors Water-proof,
Humidity-proof, Acid Base, Termite ProtectionHigh density,
Resistant,No Rotting, Non-deformation Durable Temperature
between -40 to +60 Centi Degree No Painting,No Glue and Low
Maintainence UV Protection,Stable ColorFully Environmental,
Recyclable, Saving Forest Resource
Co-extrusion Decking Covered with a high polymer that completely encapsulates the board in an impermeable layer of protection from fading, staining mildew,and scratching.
created a patented process called Naturalerm on its that makes the board visually more matte and gives a realistic fibrous texture to the board.
created a patented process called Naturalerm on its that makes the board visually more matte and gives a realistic fibrous texture to the board.
3D Wood Grain Decking is a revolutionary products to traditional wPCThe embossing process didn't from "thermo print" but "pressure print" so this wood grain can stay at least 8-10 years.
It keeps plastic crust so the surface is more hard and absorb less water.Scratch will not work on the surface because of the hard surfaccwater/oil/wine stain will not stay on the surface as well
It keeps plastic crust so the surface is more hard and absorb less water.Scratch will not work on the surface because of the hard surfaccwater/oil/wine stain will not stay on the surface as well
Co-Extrusion Decking
Co-extrusion decking foor has solid, hollow 2 big kinds of product, apply to average household respectively
and the business place oferowd dense.In each of the subtle grooves, all the polymer composite protective layer 360 - degree full - covering technology.Ayoid mildew, water cracking, discoloration, deformation and warping defects of traditional solid wood. preservative wood.common outdoor profile and other products
Co-extrusion decking foor has solid, hollow 2 big kinds of product, apply to average household respectively
and the business place oferowd dense.In each of the subtle grooves, all the polymer composite protective layer 360 - degree full - covering technology.Ayoid mildew, water cracking, discoloration, deformation and warping defects of traditional solid wood. preservative wood.common outdoor profile and other products
Plastic Wood Co-Extrusion products have solid wood color changes and texture, polymer protective layer 360-degreefull coverage technology.While comprehensively enhancing the product strength.we also ensure that the product can withstand the severe test of outdoor enyironment and avoid various defects of traditionasolid wood and anti-corrosion wood roducts.The rich color sclection of the wholc color system further strengthens itshigh-end status in the field of outdoor foor, so as to adapt to different cultural backgrounds worldwide.develop new products and meet different demands of customers.
| PRODUCT SPECIFICATION | ||||||||||||||||||
| Item | Standard | Requirements | Result | |||||||||||||||
| Slip Resistance Dry | EN 15534-1:2014 Section6.4.2 CEN/TS 15676:2007 | Pendulum value≥36 | Longtitudinal direction:Mean 72,Min 70 Horizontal direction:Mean 79,Min 78 | |||||||||||||||
| EN 15534-4:2014 Section 4.4 | ||||||||||||||||||
| Slip Resistance Wet | EN 15534-1:2014 Section6.4.2 CEN/TS 15676:2007 | Pendulum value≥36 | Longtitudinal direction:Mean 46,Min 44 Horizontal direction:Mean 55,Min 53 | |||||||||||||||
| EN 15534-4:2014 Section 4.4 | ||||||||||||||||||
| Falling mass impact resistance | EN 15534-1:2014 Section7.1.2.1 | None of the speciments shall a failure with a crack length≥10mm or a depth of residual indentation≥0.5mm | Max.Crack length(mm):No crack Max.Residual indenation(mm):0.31 | |||||||||||||||
| EN 15534-4:2014 Section 4.5.1 | ||||||||||||||||||
| Flexural properties | EN15534-1:2014 AnnexA | -F'max:Mean≥3300N,Min≥3000N -Deflection under a load of 500N Mean≤2.0mm,Max≤2.5mm | Bending Strength:27.4 MPa Modulus of elasiticity:3969 MPa Maximum load: Mean 3786N,Min 3540N Deflection at 500N: Mean:0.86mm,Max:0.99mm | |||||||||||||||
| EN 15534-4:2014 Section 4.5.2 | ||||||||||||||||||
| Creep behaviour | EN 15534-1:2014 Section7.4.1 | Known span in use: Mean S≤10mm,Max S≤13mm, Mean Sr≤5mm | Span: 330mm,Mean S 1.65mm,Max S 1.72mm,Mean Sr 1.27mm | |||||||||||||||
| EN 15534-4:2014 Section 4.5.3 | ||||||||||||||||||
| Swelling and water absorption | EN 15534-1:2014 Section8.3.1 | Mean Swelling:≤4% in thickness,≤0.8% in width,≤0.4% in length Max swelling:≤5% in thickness, ≤1.2% in width,≤0.6% in length Water absorption: Mean:≤7%,Max:≤9% | Mean Swelling:1.81% in thickness,0.22% in width,0.36% in length Max Swelling:2.36% in thickness,0.23% in width,0.44% in length Water absorption:Mean:4.32%,Max:5.06% | |||||||||||||||
| EN 15534-4:2014 Section 4.5.5 | ||||||||||||||||||
| Boiling Test | EN 15534-1:2014 Section8.3.3 | Water absorption in weight: Mean≤7%,Max≤9% | Water absorption:Mean:4.32%,Max:5.07% | |||||||||||||||
| EN 15534-4:2014 Section 4.5.5 | ||||||||||||||||||
| Linear thermal expansion coefficient | EN 15534-1:2014 Section9.2 | ≤50×10 K¹ | 34.2 x10 K¹ | |||||||||||||||
| EN 15534-4:2014 Section 4.5.6 ISO 11359-2:1999 | ||||||||||||||||||
| Resistance to indentation | EN 15534-1:2014 Section7.5 | Brinell hardness: 79 MPa Rate of elastic recovery:65% | ||||||||||||||||
| EN 15534-4:2014 Section 4.5.7 | ||||||||||||||||||
| Heat reversion | EN 15534-1:2014 Section9.3 | Test Temperature:100ºC Mean: 0.09% | ||||||||||||||||
| EN 15534-4:2014 Section 4.5.7 EN 479:2018 | ||||||||||||||||||
