Audited Supplier
| WPC | Wood |
| 100% Waterproof | Would swell or deform under severe water conditions |
| Resistance to rot and crack | High possibility rot or crack |
| Low flame spread | Weaker resistant to flame spread |
| Stable over wide range of temperature | Could deform at high emperatures |
| Outstanding screw and nail retention | Weaker slip resistance |
| Readymade material: no need to pain, wax, | Under goes several stages on site for |
| Or stain on site | surface treatment |
| Does not require periodic painting | With age could require repainting |
| ls impervious to insets | Could corrode with age by termites or wood ants |
| High scratch resistance | Low resistance to scratch |
| High impact resistance | Weaker impact resistance |
| product name | WPC (wood plastic composite) door | |||||||||
| Material | WPC (wood plastic composite) door | |||||||||
| surface treatment | Baking paint/heat transfer/PVC laminating | |||||||||
| surface design | Flush (solid color) | engraving design | Insulated glass | decorative moldingrecessed | 5D printing | |||||
| Door leaf width (mm) | 510mm/520mm/560mm/600mm/630mm/650mm/700mm/710mm/730mm/750mm/760mm/800mm/850mm/900mm/910mm | |||||||||
| Thickness (mm) | 45mm | |||||||||
| Length (mm) | Unlimited | |||||||||
| Door frame(mm) | 90mm | 100mm | 140mm | 180mm | 220mm | 260mm | ||||
| Lintel (mm) | 60mm/80mm/can be customized | |||||||||
1. The raw materials used for wood-plastic doors are formed in one step under high temperature, high pressure, and vacuum conditions. The materials do not contain formaldehyde. Thermal transfer technology is used in the secondary processing, which is paint-free. There are no toxic or harmful gases and odors during production and use. Release is a type of environmentally friendly building materials and decoration products.
2. Waterproof, moisture-proof, anti-corrosion, anti-mildew, anti-insect, and non-deformation. Wood-plastic products have the dual characteristics of wood and plastic. Therefore, in addition to being used as indoor doors, wood-plastic door sets are especially suitable for large temperature differences, humidity, and poor ventilation. Places such as damp bathrooms require anti-corrosion, mildew-proof, moth-proof storage rooms, etc.
3. Reasonable structure and high strength. The special cavity structure design ensures the ideal internal structure of the wood-plastic foam material. Together with the excellent formula design and reasonable production technology, the strength of the product is ensured.
4. The wood-plastic door has a quick-installation structure, and the door pocket is extremely convenient to install. The door pocket wire and door pocket are connected using bayonet connections. No nails or glue are required for fixation, which saves time and effort in installation.
5. Good thermal insulation and sound insulation properties. The material used in the wood-plastic set door has uniform and fine cells and a specially designed cavity structure, which ensures that its thermal conductivity is lower than ordinary plastic materials and its noise reduction performance is good.
6. It has good flame retardant properties. The wood-plastic door will not support combustion when exposed to open flames and will automatically extinguish after leaving the fire. It is a safety-level interior decorative door product.
JADELIGHT is a leading enterprise integrating product research and development, manufacturing, sales and service in the modern home building materials industry. The project covers an area of about 20,000 square meters, with a total investment of 100 million yuan. In the first half of 2021, it will be listed as the preferred project of new and old kinetic energy conversion in Shandong Province.
The products have the advantages of green environmental protection, waterproof, fireproof, non-slip, wear-resistant, etc. The annual production capacity of the project is about 15 million square meters, and the products meet NE649-2011 and GB4085-83 Standards, and passed SGS, CE and other certifications, the products are mainly exported to the United States, Europe, Canada, the Middle East, South America, Southeast Asia and other countries and regions. And established a long-term cooperative relationship, the market prospect is broad.
Adhering to the brand core value of "quality, professionalism and trust", with the vision of promoting people's home pleasure and quality of life, JADELIGHT uses its professional experience in the field of SPC floor manufacturing to allow consumers to enjoy high-quality green home life.
1.Q: What are your main products?
A: Our main products include: wood-plastic doors and wood-plastic wall panels.
2.Q: How do you ensure the quality of your products? Is there any warranty time?
A: We have a QC department that is responsible for every bit of quality from raw materials to finished products. Our warranty is 2 years.
3.Q: Can you make the door according to our drawings?
A: We can. But customers should send us drawings for inspection first, and then we will discuss in detail. If we are unable to do so, we will notify the customer.
4.Q: Can you provide door accessories (locks, handles and hinges)?
A: Yes, we have good partners who produce door accessories.
5. Q: Can you send us samples?
A: Yes, mini door samples are free.
6. Q: What is your minimum order quantity?
A: Our MOQ for WPC doors is 30 sets per pallet. For WPC door panels, our MOQ is 100 pieces.
7.Q: What are your payment terms?
A: 30% T/T in advance, 70% balance paid before delivery.
8. Q: What is your delivery time?
A: It depends on your order, usually 20-25 days after receiving the deposit.
