Audited Supplier
• Save600 Daily and Finish Projects 2X Faster
• Let Your Competitors Stay Stuck in the Mud!
• 3-in-1 Workflow
• Single-Engine Design Cuts Fuel Use by 40% vs Traditional Loader+Mixer Combo
• Deliver Ready-Mix Concrete 2X Faster - From Loading to Pouring in 1 Trip!
• No Excavator = No Extra Maintenance Costs - Save $5,000/year on Spare Parts.
• Patented Dual-Chamber Design: Front Compartment Loading While Rear Compartment Mixing - Zero Waiting Time.
• Automatic Balance Control - Ensures Stable Mixing Even on 25° Slopes. Where Others Get Stuck, We Keep Mixing!
• Cost optimization:
Scale production reduces manufacturing costs, while modular design (e.g. engine can be equipped with Yuchai, Cummins, Weichai) to meet diversified needs.
•One-stop service: provide "equipment + training + accessories + financial solutions" package sales
• Scenario application: vertical domain customization
| Scenarios | Pain Points | Solutions |
| Urban construction | Height restriction, noise control | Small mixer truck (4-6m³) + silent hydraulic system. |
| Remote mining area | Poor road conditions, difficult to maintain | Reinforced tires + anti-vibration cab + localized parts stock. |
| Nuclear Power / High Speed Rail | High Precision Concrete Requirements | Equipped with intelligent mixing system with weighing error <1%. |
| Mountainous terrain, large load capacity | Enhanced chassis design + steep hill descent function |
Mobile flexibility: It can self-propel to different construction sites without the need for additional transport vehicles, thus improving work efficiency.
Labor savings: It does not require a large amount of labor for loading and other operations, reducing labor costs.
Efficient concrete mixing equipment, Self-Loading Concrete Mixer = Mixer+loader+truck.
"Stop Wasting $5,000/month on Loaders & Workers!!! Our Self-Loading Mixer Cuts Labor Cost by 70% & Works on 30° Slopes - ROI in 6 Months."
Model | Concrete Output |
0.8m³ | 4-4.8m³/hour,32-38.4m³/day |
1.2m³ | 6-7.2m³/hour,48-57.6m³/day |
1.8m³ | 9-10.8m³/hour,72-86.4m³/day |
2.0m³ | 10-12m³/hour,80-96m³/day |
2.6m³ | 10.4-13m³/hour,83.2-104m³/day |
3.5m³ | 14-17.5m³/hour,112-140m³/day |
4.0m³ | 16-20m³/hour,128-160m³/day |
5.5m³ | 22-27.5m³/hour,176-220m³/day |
6.5m³ | :26-32.5m³/hour,208-260m³/day |
(2) For suppliers, we will provide you with sufficient profit margin, and at the same time, we will provide after-sales service for our products within 1-3 years.
(3) We will provide you with pre factory testing to ensure product quality. At the same time, we will provide free promotion for you in your country/region and support customized colors and product trademarks
Assuming an 8-hour workday and 26 days per month:
-SQMG mixer truck: 1 person x $20/hour=$4160/month -Traditional method: 1 loader ($50/hour)+3 workers ($15/hour)=$50 x 8+$15 x 3 x 8=$400+$360=$760/day → $19760/month Save $15600 per month**
Parameter | SQMG Self loading concrete mixer truck | Ordinary mixer truck Ordinary mixer truck |
Loading time | 3-minute automatic feeding | Need loader+15 minutes |
Minimum number of homework participants | 1 person | 3-4 people |
Maximum climbing gradient | 45° | 15° |
dynamic system | German hydraulic system | Domestic standard hydraulic |
Product Advantage
1. Our products are delivered faster.
Our company has more than 1,000 production workers, a complete production process, and also adds robot manufacturing. The delivery cycle is guaranteed, and more than 80% of orders last year were delivered ahead of schedule. Our early delivery helps our foreign dealer customers save costs and better maintain their customers.
2.The same price with the best quality, the same quality with the best price
Our company has established a complete supplier credit evaluation directory for all raw material suppliers. Conduct third-party inspections of raw materials provided by suppliers and issue reports, and document each batch of raw materials to achieve material traceability.
Abandoning traditional craftsmanship, all product surfaces adopt baking paint technology and will not rust after 10 years of use.
There is no sample inspection before the products leave the factory, and all products are required to be inspected.
High-quality products reduce after-sales service and increase customer experience.
3. Innovation ability
Our company has a professional R&D team to ensure product updates based on market feedback every year, ensure that the products sold by dealers are updated every year, and submit the market share of dealers.
4. Product Diversity
The above four points create the diversity of our company's products. The professional team perfectly completes the OEM production required by customers.
Automatic Hydraulic Chute
2.Feed Cost Saving: The feeding speed can be adjusted according to the pig's intake, avoiding overfeeding or underfeeding, thereby saving feed costs.
3.Reduction in Infectious Disease Probability: Due to the uniform feed output, feed does not accumulate, reducing the opportunity for the spread of infectious diseases.
4.Easy Cleaning: Compared to traditional feed troughs, automatic hydraulic feed troughs are easier to clean, reducing the possibility of feed residue and bacterial growth.
- Capacity and Size: The capacity and size of the scoop vary according to different mixer truck models and requirements. Generally speaking, the larger the scoop capacity, the more concrete it can carry.
- Wear Resistance: The scoop is usually made of wear-resistant materials to withstand the wear and impact of concrete, thereby extending its service life.
- Mixing Function: The scoop may be equipped with mixing blades or mixing mechanisms inside, capable of mixing concrete during transportation to ensure its uniformity and quality.
- Discharging Method: There are also various discharging methods for the scoop, including tilting discharge, flipping discharge, etc., to accurately discharge concrete to the required location.
- By enhancing the function of the bucket through vibration, the excavator can complete various tasks more quickly.
- It can be used in various working scenarios such as soil compaction, pile driving, asphalt cutting, etc.
- Compared to traditional diesel-powered compressors, it has a smaller volume and is more suitable for mobile use.
- Effective heat dissipation can reduce the wear and aging of hydraulic components, extending the service life of the system.
2.
Nowadays, turbocharging technology has been widely applied to automobile engines. A turbocharged engine mainly consists of two parts: a compressor turbine and an exhaust turbine.
3.The compressor turbine is connected to the intake manifold, while the exhaust turbine is connected to the exhaust manifold. When the engine reaches a certain speed, the rotation of the exhaust turbine drives the rotation of the compressor turbine, which compresses the air and delivers it into the engine cylinders.
4.This increases the amount of air entering the cylinders, thereby increasing the fuel injection amount and enhancing the engine power.
Improved Passability: Due to the two-part reduction mechanism, the volume of the axle housing is significantly reduced, and the ground clearance is increased, thus providing better passability, especially suitable for off-road conditions.
Adaptability to Poor Road Conditions: In situations with poor road conditions, frequent climbing, or heavy loads, the dual brake wheel hub reduction axle can better cope with these challenges, demonstrating high reliability.
Heat Dissipation: During high-speed driving, the heat generated by friction between the tires and the ground concentrates at the wheel ends. The heat dissipation conditions of the wheel hub reducer are poor, making it prone to overheating.
Comprehensive certification
Our company's product certifications include CE, ISO90001, etc. At the same time, every year our company invites SGS .BV.TUV to come to the company for company certification and issue a certification report.
Established in 1992, Shandong Shanqi Construction Machinery (Group) Co., Ltd. located in Laizhou City, Yantai. We have 3 factories cover an area of 200,000 square meters and has more than 600 employees.
The company's main products are self-loading mixer trucks, rough terrain forklifts, wheel loaders, etc.
Under the guidance of the corporate philosophy of "taking science and technology as the guide to make the environment more harmonious; using innovation as the driving force to make human life better" and the business belief of "quality management, leading technology", we use unknown excellent products and scientific and efficient management , high-quality and standardized services, we have developed into an outstanding enterprise.
The company is a professional construction machinery manufacturer with 31 years of experience. It ranks first in production and sales of self-loading mixer trucks in China and supplies to five Fortune 500 companies.
Production process
Process Description
We also offer(free of charge) to all customers:
1. Details of video chat machines (special models)
2. User manual/special model user manual/special OEM requirements for the machine.
3. One toolbox and one (possibly two:) additional engine filter
4. If any special parts are damaged, they will be sent by air express.
5. We have a loading area. If you have any other goods, please send them to us and package them together with our machines (free of charge)
6. Machine images and videos of customer websites and advertisements (our professional advertising design) 7. Gifts
Mature product design/production system/service guarantee system
Years of international trade cooperation experience let us have full OEM/ODM customization capabilities, follow the quality standards in strict accordance with the customer's own needs to customize, to provide customers with perfect solutions
30-Day Money Back Guarantee if Not Satisfied 3-Year Core Parts WarrantyWe have enjoyed repeating orders from many clients who trust us for years, and it is all about stable quality.
We are very serious about quality inspection and we try our best to stop any defective products from being shipped.Once we found any quality issues or un-qualified products, we will replace them at any cost.
After-sales service:
1.Localized service network
a.Set up service centers in key markets to provide 48-hour on-site response.
b.After-sales team to provide technical guidance, and the team to track customer usage
2.Digitalized after-sales tools
c.Remote guidance - customers can get real-time maintenance guidelines through cell phone camera
Q: Are you the original manufacturer?
Answer: Yes, ZKJF was established in 1992 and is a national heavy equipment manufacturing enterprise mainly supported by the Chinese government.
Q: How is the quality of your products?
Answer: Our company has passed ISO9001, ISO45001, ISO14001 and other certifications. Most of our products have patent certificates, and related products have also passed CE certification. All the machines are carefully and strictly inspected and maintained by our skilled workers according to Chinese national standards as well as international standards, before shipping we will check the equipment again until it runs well before delivery. So as to ensure that every machine we deliver to customers has good performance and high quality.
Q: Will the price be higher than that of low-end products in the industry?
Answer: We are the leading manufacturing factory in China, and many big brand owners also carry out OEM production in our company. The production scale has reached a certain level. Although our products are of higher quality, the price is still very favorable.
Q: Do you provide after-sales service?
Answer: Yes. We provide a 12-month warranty, and our company is responsible for product quality problems caused by quality during this period. That is, if quality problems occur within 12 months after purchase, our company will provide free spare parts and promise to provide technical services. Our company has a professional after-sales service team, after-sales engineers provide installation and commissioning training, and solve all your worries systematically, thoroughly and quickly.
Q: How about your product spare parts service?
A: We are committed to providing our customers with high quality product spare parts service, precise fit and fast delivery and service. If spare parts are damaged due to product quality problems during the warranty period, we provide free spare parts.
Q: What about problems in daily use?
Our customer maintenance department and after-sales service engineers provide online consultation at any time
