SRCKSG480-10/7%
Power, Electronic, Instrument, Lighting, Rectifier, Audio
Three
Othe
Dry-type Transformer
Other
Other
Single-phase Transformer
Low Frequency
Ring
Tongtian
Efficient and Reliable
TongTian
Other
1030*780*320mm
Jiangsu, China
Product Description


Advantages:
- High-efficiency harmonic suppression capability: THD < 5%
- Equipment protection and lifespan extension: Reduces temperature rise and power loss; Suppresses voltage spikes
- Enhanced system stability: Improves power factor, strengthens grid compatibility
- High reliability and durability: High temperature resistance, rugged environmental adaptability
- High-efficiency harmonic suppression
- Reduced operational and maintenance costs
- Environmental compliance
Trademark | TongTian | |
Place of Origin | Jiangsu, China | |
Product Name | Resistant capacitor | |
Specification | 1030*780*320mm | |
Reactance Rate | 6%, 7%, 12%, 14% | |
Low Temperature Rise | ≤70K (@ rated current at power frequency) | |
Low Noise | ≤70K48, dB (@ power frequency, measured 1m from the product) | |
Insulation Class | H Class (180ºC) | |
Voltage Resistance | Apply 4kVac between phases and to ground for 1 minute, no breakdown phenomenon | |
Linearity | 1.8In, inductance value not less than 0.95 of rated inductance | |
Overtemperature Protection | NC125ºC temperature control | |
Standards | GB/T 1094.6-2011 IEC60076-6 "Reactors" | |
Connection Method | Three-phase | Three inputs and three outputs, with the top being the input terminal and the bottom being the output terminal. |
Single-phase | One input and one output, with the top being the input terminal and the bottom being the output terminal. | |
Installation altitude | No higher than 2000m. | |
Installation location | No severe mechanical vibrations. | |
Installation environment | Temperature -25ºC to +45ºC, relative humidity not exceeding 90%. | |
There should be no flammable or explosive hazardous materials nearby, and good ventilation conditions should be ensured. If installed in a cabinet, ventilation equipment should be added. |
Product Model | A(mm) | B(mm) | C(mm) | D(mm) | E(mm) | F(mm) | G(mm) | Material |
SRCKSG0.48-0.35/7 | 185 | 185 | 90 | 90 | 150 | 18 | 10 | Copper, Aluminum |
SRCKSG0.48-0.7/7 | 185 | 185 | 90 | 90 | 150 | 18 | 10 | Copper, Aluminum |
SRCKSG0.48-1.05/7 | 185 | 185 | 90 | 90 | 150 | 18 | 10 | Copper, Aluminum |
SRCKSG0.48-1.4/7 | 225 | 210 | 120 | 105 | 180 | 18 | 10 | Copper, Aluminum |
SRCKSG0.48-1.75/7 | 225 | 210 | 120 | 105 | 180 | 18 | 10 | Copper, Aluminum |
SRCKSG0.48-2.1/7 | 225 | 210 | 120 | 105 | 180 | 18 | 10 | Copper, Aluminum |
SRCKSG0.48-2.8/7 | 225 | 230 | 120 | 105 | 180 | 18 | 10 | Copper |
SRCKSG0.48-2.8/7 | 235 | 230 | 120 | 105 | 180 | 18 | 10 | Aluminum |
SRCKSG0.48-3.5/7 | 225 | 230 | 120 | 105 | 180 | 18 | 10 | Copper |
SRCKSG0.48-3.5/7 | 235 | 230 | 120 | 105 | 180 | 18 | 10 | Aluminum |
SRCKSG0.48-4.2/7 | 265 | 230 | 140 | 115 | 190 | 18 | 10 | Copper, Aluminum |
SRCKSG0.48-2.1/14 | 225 | 210 | 120 | 105 | 180 | 18 | 10 | Copper, Aluminum |
Product Model | A(mm) | B(mm) | C(mm) | D(mm) | E(mm) | F(mm) | G(mm) | Material |
SRCKSG0.525-2.8/14 | 225 | 210 | 120 | 105 | 180 | 18 | 10 | Copper, Aluminum |
SRCKSG0.525-3.5/14 | 265 | 235 | 140 | 115 | 190 | 18 | 10 | Copper, Aluminum |
SRCKSG0.525-4.2/14 | 265 | 235 | 140 | 115 | 190 | 18 | 10 | Copper, Aluminum |
SRCKSG0.525-5.6/14 | 300 | 280 | 140 | 115 | 190 | 18 | 10 | Copper, Aluminum |
SRCKSG0.525-7.0/14 | 300 | 280 | 140 | 125 | 200 | 18 | 10 | Copper, Aluminum |
SRCKSG0.525-8.4/14 | 300 | 280 | 140 | 125 | 200 | 18 | 10 | Copper |
SRCKSG0.25-0.23*3/7 | 240 | 180 | 135 | 85 | 175 | 18 | 10 | Copper, Aluminum |
SRCKSG0.25-0.35*3/7 | 240 | 180 | 135 | 85 | 185 | 18 | 10 | Copper, Aluminum |
SRCKSG0.25-0.47*3/7 | 240 | 180 | 135 | 95 | 185 | 18 | 10 | Copper, Aluminum |
SRCKSG0.25-0.58*3/7 | 240 | 200 | 135 | 100 | 190 | 18 | 10 | Copper, Aluminum |
SRCKSG0.25-0.7*3/7 | 240 | 200 | 135 | 100 | 190 | 18 | 10 | Copper, Aluminum |
SRCKSG0.25-0.93*3/7 | 240 | 200 | 135 | 100 | 190 | 18 | 10 | Copper |
SRCKSG0.25-0.93*3/7 | 250 | 220 | 135 | 105 | 200 | 18 | 10 | Aluminum |
This series of harmonic suppression reactors is primarily designed to support low-voltage system power capacitors, improve the power factor of the power system, effectively suppress higher-order harmonics in the power grid, reduce overloads on capacitors caused by harmonics, prevent harmonic amplification, and ensure the safe operation of capacitors. It also improves the waveform of network voltage, enhances power supply quality, and contributes positively to the safe and economical operation of the power grid. It is suitable for reactive power compensation and filtering for loads with 3rd, 5th, 7th, 11th, and 13th harmonics.

















Yes.
Q2.Can l use my own logo or design on the products?
Yes, we offer OEM/ODM service; your logo and design can be made on the products
Q3. Do you have a factory?
Yes, we have a factory in Jiangsu. Welcome to visit our company and factory.
We are a professional manufacturer and offer OEM/ODM service to our customers.
Q4.What is the production capacity of your factory?
Our production capacity is equivalent to 80,000pcs per month for triggers, 300,000pcs permonth for compensation capacitors and 100,000 units per month for power capacitors.
Q5.When do you ship products?
All of our products are in stock and will be shipped within 5 days. We can deliver 40,000 pcswithin 7 days.