Audited Supplier
JCLJ 04051
on Line
3 Months
Equilateral Prism
Beam Split
Cube Corner Prism
Glass
Optical
Customized
3-200mm
+/-0.05mm
1'
40-20
1/8-1/4
50:50
200-2000nm
Juncheng
Optical Paper Foam Board and Hard Box
20*20*10cm
China Jilin
9001909090
Product Description
Optical Prisms are used to redirect light at a designated angle. Optical Prisms are ideal for ray deviation, or for adjusting the orientation of an image. An Optical Prism's design determines how light interacts with it. When light enters an Optical Prism, it either reflects off an individual surface or several surfaces before exiting, or is refracted as it travels through the substrate. For example, when light enters a right angle prism, it reflects off a single surface, causing the light to redirect at 90°. When light enters a wedge prism, though, a change in substrate thickness causes the light to deviate through refraction.
CCJC Optics offers plate, cube, pellicle, polka dot, or specialty prism Beamsplitters in a variety of anti-reflection coatings or substrates. Standard Beamsplitters, which split incident light by a specified ratio that is independent of wavelength or polarization state, are ideal for illumination subassemblies or as one way mirrors. Dichroic Beamsplitters, which split light by wavelength, are often used as laser beam combiners or as broadband hot or cold mirrors. Non-Polarizing Beamsplitters, ideal for laser beam manipulation, split light by overall intensity. Polarizing Beamsplitters, often used in photonics instrumentation, split light by polarization state. Edmund Optics' anti-reflection coatings are designed for the Ultraviolet (UV), Visible, of Infrared (IR).
| Material | SCHOTT/ HOYA/ OHARA/ CDGM |
| Dimension Tolerance | ±0.05mm |
| Angle Tolerance | 1' |
| Thickness Tolerance | ±0.1mm |
| Surface Flatness | λ/4@632.8nm |
| Surface Quality | 40-20 |
| Clear Aperture | >90% |
| Chamfer | <0.2×45° |
| Coating:AR | A:350-650nm B:650-1050nm C:1050-1580nm |
