Fast Delivery Waste Plastic Double Screw Pelletizer Machine

ACS-H Compacting & Pelletizing system
3 in 1 integrated recycling system
Size reduction, pre-heating and pelletizing, 3 in 1 integrated system, less cost.
More effective and stable system for plastics of low bulk density.
Higher output and lower energy consumption.
Lower investment for a higher performance machine.
Standard production and management in the workshop.
Combines size reduction, plasticization and pelletizing in an integrated system. 
Qualified for soft plastics as well as rigid flakes with innovative special design.

ACSS Compacting & Pelletizing system
The acss series compacting and pelletizing system combines function of crushing, compacting, plasticization and pelletizing to one step.applied in the plastics recycling and pelletizing process.

ACS-PRO Compacting & MIDDLE FILTRATION
Excellent degassing and filtering performance for recycling
The ACS-Pro is the entirely new standard recycling and pelletizing system with optimized super long L/D ratio, filtering ahead of vacuum degassing, specially suit to the waste plastics such as high contaminated and heavily printed recycling and pelletizing.
The drive of compactor controlled by inverter, together with sliding gate device installed on the outlet of compactor room, to guarantee ACS-Pro not only handle loosing material recycling but also rigid regrinds material re-pelletizing.

ASPTM SHREDDIng & Pelletizing system
Suitable to both light/rigid plastic recycles;
Easier operation;
Smaller space occupation;
Intelligence: One-button start/stop;
25% Lower energy comsuption
The ASP series shredding and pelletizing system combines function of shredding, crushing, enforcing feeding, plasticization and pelletizing in one system.
Applied in the plastics recycling and pelletizing process, ASPTM system is a integrated and cost-saving solution for every kind of plastic scrap, such as film, raffia, trim, purge, hollow part, bottle and foaming material in plant recycling.

ASE-H REGRINDIng & Pelletizing system
Rigids Recycling Machine Pellet Quality Ensured
The ASE-HTM series single screw extrusion and pelletizing system, is a specialized and reliable system, suitable to the recycling and re-pelletizing job of rigid plastic scrap. It is an efficiency and continuous system that makes rigid plastics, such as flakes, regrinds, crushed plastics into granules again with gentle re-melting, significant volatilization and impurities-filtration.

ADS REGRINDIng & Pelletizing system
The ADS series single screw extrusion and pelletizing system is a specialized and reliable system, suitable to the recycling and re-pelletizing job of rigid plastic scrap.

ATE Twin Screw Extrude
ATE Twin-screw: Modular design for recycling, extrusion, compounding.
ATE Series Co-rotating Parallel Twin Screw Extruder consists of motor drive, torque distribution gearbox, processing section, temperature controlling units, diesection and down-stream pelletizing system, etc.
ATE Twin Screw Extruder adopts modular design principle, component standardization manufacturing, which can present stable and reliable 
performance.
Thanks to the modular principle, ATE extruderscan provide highly customizable solutions according to customers' process and special requirements. Based on different output torque grade, ATE series extruders have basic type and efficiency type.

SCF series disc-type self-cleaning filtration system
Non-mesh design
The new SCF self-cleaning filtration system makes non-stopping recycling extrusion, especially suitable to highly contaminated materials re-pelletizing. Different from traditional screen changers, which requires timely change the dirty wire mesh, the SCF system will present continuous filtering performance, and remove the contaminates from the surface of steel screen plate automatically.
The SCF filtration system consists of hardened steel screen plate, rotating unit, hydraulic section, contaminates removing blades and discharging screw.
UP TO 5%
SCF filtration system can handle and remove up to 5% contaminates in the melt flowing, can separate the contaminates as: paper, wood, aluminum, unmelted plastic and rubbers etc.
SCF typical features 
Non wire-mesh required, long using life of disc screen plate;
Reliable Continuous Filtration with stable pressure;
Self-cleaning job done in the filtering room, friendly to the environment and not pollute the air;
Filtering accuracy can reach 120μm, can handle and remove up to 5% contaminates;
Less back-pressure in the filtering room thanks to short flowing channel and big filtering area;
Larger filtering area, up to 2.32 million mirco-drilled holes;
Automatically wiping action to assure constant self-cleaning of screen plate;