Audited Supplier
PRODUCT DISPLAY
Wireless Remote Control Overhead Crane with CE certificate
PRODUCT FEATURES
-----------
Brief Introduction:
Double girder electric overhead crane has the advantages of compact shape dimension, low building headroom height, light weight, small wheel pressure and so on. It uses together with CD1 or MD1 electric hoist. It is suitable for transporting, assembling, repairing and load; Unload works in mechanical processing workshop, metallurgy auxiliary workshop, storage, yards, power station and so on. It can replace normal double-beam bridge crane and being used in workshop of textile industry and food industry. The work type can be divided into two kinds- light class and intermediate class, the temperature of working environment is -25ºC-40ºC.
Technical Parameters:
| Mechanism | Item | Unit | Result | ||
| Item | |||||
| Lifting capacity | Ton | 1-500ton | |||
| Working grade | A3-A5 | ||||
| Span | M | 5-40m | |||
| Working environment temperature | °C | -25~40 | |||
| Travelling mechanism | Working speed | M/min | 20-75 | ||
| Motor | Type | YZR160M2 | |||
| Power | Kw | 2*0.8 | 2*1.5 | ||
| Rotational speed | M/min | 1380 | |||
| Lifting mechanism | Lifting speed | M/min | 8/0.8(7/0.7) 3.5(3.5/0.35) 8(7) | ||
| Lifting height | H(m) | 6 9 12 18 24 30 | |||
| Travelling speed | M/min | 20 30 | |||
| Working system | A3-A5 | ||||
| Power source | 380V 3pH 50Hz | ||||
PRODUCT DETAILS
-----------
♦ This product has two operational methods, ground(pendent controller /remote controller) or operational cabin room.
| Lifting Mechanism | Winch trolley Or double girder hoist |  |
| Main Girder/Beam | Double Rigid welded box type Module design Travel speed: Variable Function: Bearing load Material: Q235/345 |  |
| End Carriages | Rigid welded box type Module design Gear motor &reducer Function: Push crane run forward or reverse Materials: Q235/345 |  |
| Control | Ground pendent button Radio Remote control Cabin control |  |
| Electric parts | Circuit breaker/ AC contactor etc electric parts use /Siemens/ABB/DELIXI etc famous brand |  |
2.It has beautiful box-typed welded main girders. Computer optimized design for main girders with good performance and light weight;
3.Compact structure, light weight and high lifting height;
4.The Max. span reaches 40 meters;
3.It's widely used in workshops, metallurgy, warehouses and assembly shops etc.
Mechanism :(Overhead bridge crane)
1. Double main girders, box-type shaped by wielding;
2. High quality carbon steel Q235B and Q345B;
3. Double girder connected by high strength screws;
4. Welding seams are tested by X-ray and ultrasound;
5. Forged wheels;
6. Compact structure, small volume and light weight trolley;
7. Lifting mechanism is open type winch trolley;
8. Compact reducer motor drive, step less control, hardened gears and safety disc brake;
9. Good operation performance, step less speed regulating and running smoothly;
10. Main girders Shot blasting sa2.5 after welding to release internal stresses;
11. Painting high quality epoxy zinc-rich primer, and the thickness of oil film is 140μm;
Electric System:(Overhead bridge crane)
1. Power supply through step less slide lines;
2. Lifting mechanisms and traveling mechanisms are mutually independent and could travel at the same time;
3. Control panel protection degree is IP54;
4. Reasonable components installation, convenient for check and maintenance;
5. Electric cable is suspended in cable saddle, stationary cable trolley which slides on a galvanized C-type steel;
6. It is customerized brand by customer like Schineider, Siemens, ABB etc.
Safety Devices for overhead crane:
To guarantee the normal operation of crane and avoid the personal casualty and mechanical damage, the safety device we provide are not only the electric protective devices or alarm bell but also other equipments as following:
2. Rubber Buffers
3. Electric Protective Devices
4. Emergency Stop System
5. Voltage Lower Protection Function
6. Current Overload Protection System
7. Rail Anchoring
8. Lifting Height Limit Device
FREE SPARE PARTS
-------------
CUSTOMER FEEDBACK
Shipping way of MD Cranes:
♦ Electric parts are packed by high quality plywood crate, to reduce distortion in conveying.
♦ Main beams, end beams and trolly/winch are packed by plastic woven cloth. It can reduce
Abrasion during the transportation.
♦ If the size are suitable for container ship, usually by container.
♦ Big size, usually by bulk ship or by container after truncation.
♦ Transport ways are based on reducing cost & keep safety.
PACKING & DELIVERY
CUSTOMER VISITING FACTORY
ABOUT US
-------------
CUSTOMER USE CASE
--------------
FAQ
------------------
Q1. Can the cranes be customized?
Yes, every customer's working condition is different, all of our products can be customized depend on customers' requirements. Please give us the information as clear as you can, so we can give our best design to suit for your demands.
Q2. How many operation methods for my selections?
We provide pendent controller with push button control type, remote control type or cabin control type. Please tell us what kind of operation way you need.
Q3. I have low headroom in my workshop, is it possible to install a crane in it?
We have special products for low headroom workshop, our engineer can give the best design according to your dimensions.
Q4. Do you supply lift tools?
Yes, we can provide any kind of lifting tools such as hook, electromagnetic, grab bucket etc...
Q5: In order to offer the most suitable design solution for you, it will be great helpful if you can offer us the following information to us:
1. Lifting capacity.
2. Span length. (rail center to rail center)
3. Lifting height. (hook center to ground)
4. Have you installed the rails? Do you need us to supply the rails? How long is it? 5. Power supply: Voltage.
5. Working condition: What kind of material to lift? Temperature?
6. It would be much better if it is possible for you to offer the drawing photo of your workshop.
