Audited Supplier
Fiber Laser Marker is a kind of laser which uses rare earth doped glass fibre as gain medium. Recently, fiber laser marker has been a hotspot in the field of laser physics. It is widely accepted that it is the next generation of products that could replace the solid laser entirely. Optical fiber lasers can be developed on the base of fiber amplifiers. Under the effect of pump light, it is easy to form high power density, which results in "Particle Number Inversion". Proper addition of a positive feedback loop (forming a resonance cavity) can result in a laser oscillation output. Optical Laser Marking Machine Makes Permanent Mark on Material Surface with Laser Beam. Marking is used to expose the deep material by evaporation of the surface, or to make a mark by means of the physical change of the surface, or by burning a portion of the material to display the desired etching pattern, text, bar code and so on.Laser power | 10W/20W/30W/50W/100W |
Fiber Source | MAX/RAYCUS/IPG |
Laser wavelength | 1064 |
Beam quality | M2<1.5 |
Marking Speed | ≤12000mm/s |
Laser repetition rate | ≤100KHz |
Minimum character height | 0.05mm |
Cooling Mode | Air cooled or water cooled |
Repeated precision | ±0.001mm |
Marking area | 50*50/110*110/200*200/ |
Marking line Depth | ≤1.2mm |
Communication Interface | USB |
Power Requirement | 220v/50hz |
Minimum line width | 0.012mm |
Minimum character | 0.15mm |
Power consumption of the whole machine | ≤500W |
Main parts | Fiber Source |
Marking software | EZCAD |
Certificate | CE, GS, ISO, SGS, UL |
Working temperature | 15-45 |
Laser module life | 100000hour |
After-Service | 2years |
Package | Wooden box |
Graphic format supported | AI, BMP, DST, DWG, DXF, DXP, LAS, PLT |
Total Power | ≤500W |
Applicable Materials | Metal and part of non-metal |
Location | Dynamic tagging and static tagging |
1.Long life fiber laser source: 100,000hours.
2.Board adopts EZCAD interference, the stability is stronger.
3.USB interfaces swift and stable transmission.
4.Low consumption: <400W, more economized and environmental.
5.Strong Compatibility: TTF Font, SHX, BMP, DXF, AI, PLT, etc.
6.High Precision: Up to 0.005mm, bring you the fantastic and satisfied marking effect.
7.Without any maintenance, air-cooled.
8.The lift platform adopts the lead screw and double guide rail, and is more stable, and the lifting height is 550mm.
9.Adopt the embedded operating system, which the performance is leading domestic peers, good touch interface and powerful control system, can meet the demand of most industry application process in market.
10.No consumables and minimal maintenance help reduce operating costs.
11.With red light positioning device accurately indicates the location of the processing of the laser head, eliminate the trouble about manual positioning.
1.Electronics : IPAD, Ipod, Keyboard and more standard parts.
2.Jewelry & Acessories : Rings, Pendant, Bracelet,Necklace,Sunglasses,Watches etc.
3.Electronic Components: Phone,IPAD,Resistors,Capacitors,Chips,Printed Circuit Boards, etc.
4.Mechanical Parts: Bearings, Gears, Standard Parts, Motor, etc.
5.Instrument: Panel Board, Nameplates, Precision equipment, etc.
6.Hardware Tools: Knives, Tools, Measuring Tools, Cutting Tools, etc.
7.Automobile Parts: Pistons&Rings, Gears, Shafts,Bearings,Clutch,Lights.
8.Handicrafts: Zipper, Key Holder, Souvenir,etc.
9.Electronics and communication products, IC chips, wires and cables, computer accessories and electrical appliances; a variety of precision parts, hardware tools, instruments, aerospace devices; jewelry, clothing, watches, gifts, office supplies, trade signs, sanitary ware, tableware, food, beverage and tobacco ,alcohol industries.
10.The fiber laser marking machine can be widely used in integrated circuit chips, computer accessories, industrial bearings, watches, electronic and communications products, aerospace devices, various automotive parts, home appliances, hardware tools, molds, wire and cable, food packaging, jewelry, tobacco and affairs and many other Field graphics and text markings, as well as mass production line operations.
Raycus Laser Source
Big brand, have higher photoelectric conversion efficiency, lower power consumption and higher beam quality,good laser quality, not easy to damage, durable.
Galvanometer Mirror
Beijing JHC scanner Galvanometer mirror
Professional for laser use, high light transmission and high hardness
Filed Lens
Import from Singapore (has good quality )
Singapore wavelength technology co., LTD
Marking range can be 100*110mm/200*200mm/300*3
Control System
Beijing JCZ original card .
EZCAD control system
Can be with wins XP7/8/10
EACAD Control Panel Surface
Beijing EZCAD original software ,
more function for you use and choice
when design pictures
Laser Power Supply
The Laser power import from Taiwan
MW brand , best brand use widely in China
Lifting Handle
The focus can be adjusted by shaking the handle (the automatic lifting system can also be selected to complete automatic lifting and focusing, which is more convenient and quick)
