Audited Supplier
Auto Fiber Wingding Machine for CNG or Hydrogen
Machine Describe
The equipment mainly consists of a winding main machine, an automatic wiring device, an automatic lifting system of a wiring device, a layer insulation supply device, and a layer.Insulation holding device, flat wire round wire tension adjustable pay-off stand, pneumatic system, PLC control and servo motor system, touch screen person.The machine is composed of machine interface, etc. The equipment can be used for winding double round wire, single flat wire and double flat wire
Characteristics:
2.1 When winding, the wiring device can easily set the automatic wiring pitch according to different wire gauges and the rotating speed of the winding machine.
During the winding process, possible errors can be manually fine-tuned to ensure that the coil is tight.
2.2 Cantilever button box is easy to use, clear and clear display. It is convenient for operators to operate at different stations.
Equipment purchase technical agreement Self-discharging winding machine technical agreement
Page 7 There are 17 pages
2.3 During the winding process, the automatic lifting system of the conductor arm will automatically rise according to the set wire height and layer insulation thickness.
Ensure the Angle and distance between the wire wheel and the coil, without manually adjusting the position of the wire wheel, improve the consistency of the coil winding.
2.4 On the basis of the superimposed length of the wire, the winding length can be guaranteed by compensation through the program.
2.5 Ensure that the wire will not be stretched and deformed if the coil is wound tightly.
2.6 On the basis of setting the maximum winding speed, the operator can control the operating speed through the depth of the foot switch.
2.7 Equipped with software winding zero point and laser indicating zero point to facilitate starting and simplify operation.
2.8 Coil parameters can be generated by the technician or manager in advance on the equipment or in the office computer, depending on the line
2.9 After the ring name is named, it is saved to the device. When winding, the operator only needs to retrieve the saved data for winding, and the device will follow the parameters
The number prompts the operator to perform related operations.
TECHNICAL DATA
Coil diameter (incl. leads) Ø100 - Ø1400 mm
Winding Axial Length 6000mm
Lifting Height Max 2000mm
Distance between centres 5500 mm
Centre height above baseplate 1.000mm
Loading between centres 3000 kg
Faceplate Ø 350mm
Tailstock axial movable on baseplate
live centre 60° in Morse taper MT 5
Supporting reels adjustable
Turns counter by PLC-control
with programmable stops
Faceplate speed, Flat wire 0~120rpm;Round Wire0~400rpm
Torque ≤ 5000N·M
Our Company
