Audited Supplier
C60
DIN
Plastic
Fire Melt
Hot Melt
Round
DN700
3 Layer
5 Days
Oil, Gas, Water, Pre-Insulated Pipeline
50ºC-80ºC
TSD
Standard Export Package
ISO9001
China
3921909090
Product Description
Field Joint Radiation Cross-linked Heat Shrink sleeve
TSD Heat Shrinkable Tape for pipes
Introduce:
Heat shrinkable sleeve is composited by cross-linked polyethylene and hot melt adhesive.
They are mainly used with treatment of tee joint,angleheads, and valve connections and
diameter-changing position. It is veryconvenient to be installed. Used for girth welding
joint Offshore and underground coatings are good! Owing to special adhesive , this product
has high adhesive strength,can provide long-term protection to pipeline. It is also very convenient to be installed
Heat shrinkable sleeve is composited by cross-linked polyethylene and hot melt adhesive.
They are mainly used with treatment of tee joint,angleheads, and valve connections and
diameter-changing position. It is veryconvenient to be installed. Used for girth welding
joint Offshore and underground coatings are good! Owing to special adhesive , this product
has high adhesive strength,can provide long-term protection to pipeline. It is also very convenient to be installed
Features & Benefit:
1.HSWS is a wraparound sleeve with a separate closure
2.Cross-linked backing provides superior abrasion, mechanical and chemical attack resistance.
3.High performance adhesive provides excellent resistance to Cathodic Disbondment to ensure
long-term corrosion protection.
4.Just-in-time customized lengths allow bulk rolls to be field cut to protect any pipe size.
5.Easy to operate and preheating temperature low(50 ºC)
6.Open sleeve configuration allows the product to be applied after the pipeline has been welded
and cleaned.
Application:
Oil, Gas, Wate, Pre-insulated Pipeline Joint corrosion protection.
Specification:
Pipeline Diameter Size | From 108mm to 2500mm |
Width | 100mm, 150mm, 200mm, 300mm, 450mm, 600mm, etc... |
Thickness | 1.8mm, 2.0mm, 2.2mm, 2.5mm, etc... |
Measurement | Ton or Meter |
Closure Patch | 100mm, 150mm, 200mm, etc... |
| Sleeve Operating Characteristics | Test Method | Test Result | Result | |
| Pipeline Operating Temp. | Up to 60°C | |||
| Minimum Installation Temp. | 75°C | |||
| Mainline Coating Compatibility | PE,PP, FBE,HPPC | |||
| Adhesive Properties | ||||
| Softening Point | ASTM E28 | 95°C | pass | |
| Lap Shear @ 23°C | ASTM D1002 | 400N/cm2 | pass | |
| Backing Properties | ||||
| Tensile Strength | ASTM D638 | 2600PSI | pass | |
| Elongation | ASTM D638 | 600% | pass | |
| Hardness | ASTM D2240 | 50 Shore D | pass | |
| Volume Resistivity | ASTM D257 | 1x1016 ohm-cm | pass | |
| Tape Properties | ||||
| Tape Thickness | 2.5mm | pass | ||
| Backing thickness | 1.5mm | pass | ||
| Adhesive thickness | 1mm | pass | ||
| Peel Strength @ 23°C | DIN EN12068 | 70N/cm | pass | |
| Impact Resistance | DIN EN12068 | >15J | pass | |
| Indentation Resistance | DIN EN12068 | >1mm@60C | pass | |
| Cathodic Disbondment @ 23ºC, 28 days with epoxy | DIN EN12068 | 12 mm rad | pass | |
About Us:
TSD Plastic is located in the coastal city-Qingdao, and the factory is only 1km away from Qingdao airport, 60km away from Qingdao seaport. The convenient transportation saves a lot of time and cost for our esteemed clents.
TSD Plastic Company has its own plastic sheet production line, adhesive coating machine for heat shrinkable tapes, electro fusion welding joint line, plastic sheet and plastic welding rod All the products are produced at its own workshop from raw material to end products, so the best quality of products can be controlled. TSD products are certified to international
standards like DVGW, ISO9001, Petro China ect, anexported to more than 20 countries, which has got good
reputation because of good quality with very competitive prices!
