IP Unknown

MadeInChina.com > Manufacturing & Processing Machinery > Woodworking Machinery > Wood Based Panel Machine

Fine Trimming Automatic Edge Bander Banding Machine for Wooden Furniture

Price	$7600.00 Compare
Min Order	1 Set
Shipping From	Shandong, China
Popularity	486 people viewed
Quantity	+-

Shandong Zhongyuan Machinery Co., Ltd.

Audited Supplier 2 years

Profile Certified by SGS/BV

Shandong, China
Demi Lu (Ms.)

Visit Homepage Product Catalog

Product Detail

Model NO.:

KN-800

After-sales Service:

One Year

Warranty:

One Year

Type:

Edge Banding Machine

Automatic:

Automatic

Certification:

CE, ISO

Power Supply Voltage:

380V/Three-Phase Four-Wire 50Hz

Total Power:

6kw

Air Source Pressure:

0.6-0.8MPa

Glue Pot Capacity:

2600ml

Glue Pot Temperature:

110-210

Hot Melt Adhesive Type:

PUR/EVA

External Dust Suction:

150mm

Air Volume:

9800m'/H

Gas Tank Capacity:

2L

Edge Rotation Angle:

-70~+35

Trimming Rotation Angle:

45

Edge Width:

14-70mm

Edge Thickness:

0.5-3mm (Related to The Material of The Edge)

Trimming Board Thickness:

<14mm Single-Sided Trimming 14-70mm Upper and Lowe

Edge Sealing Speed:

0-20cm/S

Transport Package:

Wooden Box

Specification:

2250*2150*1700mm

Origin:

China

Product Description

Double Stacked Arm Fully Automatic Curve Edge Banding And Trimming All-in-one Machine

1.Double stacking arm structure:Edge banding and trimming each have separate stacking arms, which can easily realize 2-person processing and improve work efficiency.Edge banding stacking arms can be used for edge banding and trimming, and can easily operate large panels.

2. Opening and closing limiter/pressing strip assembly:When feeding the belt, it automatically returns to its original position; when the edge banding belt is finished, it automatically opens. (Avoid glue accumulation due to long-term rotation of the rubber roller)

3.Machine head rotation:The angle of the edge banding/trimming assembly is adjustable, suitable for a variety of panels, and increases compatibility.Edge banding rotation angle -70~+35° Edge trimming rotation angle ±45°

4.Built-in arm brake:Release the suction cup, the brake starts automatically to prevent the arm from swinging.

Edge Banding

1.Rotatable touch screen:Touch screen control panel, can store 20 sets of data, convenient for mass production.

2.

Edge Trimming

1.Trimming start-stop device:Photoelectric device, automatically senses the board, stops rotating if no board is sensed after 5 seconds.

Profiling power wheel:During trimming, the plate is driven to rotate according to the speed of the profiling wheel.

3.Upper and lower trapezoidal blade design:Scrape as the board move, scrape off excess edge banding and glue line after trimming.

4.Trimming glue cleaning device:Automatically sprays glue cleaning liquid, the spray can be adjusted in size.

5.High-efficiency dust collection device:Dense brush with 150mm thick dust collection tube, sucks debris into the vacuum cleaner.

Power supply voltage	380V/three-phase four-wire 50HZ	Trimming rotation angle	±45°
Total power	6kW	Edge width	14-70mm
Air source pressure	0.6-0.8Mpa	Edge thickness	0.5-3mm (related to the material of the edge)
Glue pot capacity	2600ml	Trimming board thickness	<14mm single-sided trimming 14-70mm Upper and lower double trimming (related to trimming knife)
Glue pot temperature	110°C-210°C	Inner arc radius	≥20mm (special operation can seal radius 4mm)
Hot melt adhesive type	PUR/EVA	Edge sealing speed	0-20cm/s
Air volume	9800m'/h	Profiling speed	0-24cm/s
Gas tank capacity	2L	Edge sealing material types	PVC\wood veneer\melamine\plastic and other materials
Edge rotation angle	-70~+35°	External dust suction	φ150mm

Before all products are shipped, we will arrange quality inspectors to conduct quality inspections. We can send quality inspection videos to customers. After the inspection is qualified, we will arrange special personnel to pack the products into semi-wooden boxes or full wooden boxes. The entire packaging and shipping process is very strict.

Q1: I already have an edge banding machine and I would like a trimming machine. Do you have any recommendations?

A: Yes, we have a matching trimming machine. You can choose the product that suits you according to your actual production needs. Of course, we will also ask you some questions, such as plate size, plate thickness, equipment voltage, number of workers, and so on. With so many types of products, there is always one that is suitable for you.

Q2: Can your edge banding machine use PUR adhesive?
A: PUR glue has high requirements for glue pots. We recommend using models such as F14620-3700-3350 for up glue pots, depending on your specific needs.

Q3: Are you a factory or a trader?
A: We are a 20 year source production factory with rich production experience and a total of 8000+customers. We can provide you with thoughtful and accurate after-sales service.

Q4: How should I make the payment?
A: Firstly, you will pay a 50% deposit as a prepayment, and then we will start producing the equipment. After the
equipment is completed, I will send you photos and videos, and you can make the remaining payment. After receiving all the payment, we will arrange for the fastest container to ship to you. You will receive the equipment soon, and I will arrange professional technicians to coordinate with you regarding installation issues.

Q5: How long is the delivery time?
A: Conventional equipment takes 10-12 days, customized voltage or other parameters take around 30-45 days.

Message Type
* Message Content
* Name
* Phone
* Email
* CAPTCHA