DLR-2000
Naphthenic Polymer
Brown
230-250
≤0.08
≤0.08
5-7
240
≤5/Not Detected
≤50
G-TECH@
Steel Drum/IBC Drum/Tank
pure
China
Product Description
Flexible Memory Resilience Foam Polyether Polyol
HANDLING PRECAUTIONS
Flash point is above 200 degree centigrade (open cup method), flammable but non-explosive. In case of
fire, put out with foams, dry powder, steam or water.
When handling polyols, precautions should be taken to avoid exposure to the eye or prolong contact
with the skin. If eye contact occurs, flush with plenty of water. If skin contact occurs, wash exposed areas
thoroughly with soap and water.
STORAGE
It is slightly hygroscopic and may absorb water. Containers should be kept sealed and protected
from contamination of moisture and foreign materials.
Package:
Steel drum/IBC drum/Isotank
Shelf Life:
The shelf life is 6 months. After that, the pre-test should be made before use.





Polyether Polyol for Memory Resilience Foam | ||||||||
Model No. | Hydroxyl value | Water | Acid value | PH value | Viscosity | K+,Na+ | Chroma | Remark |
mgKOH/g | Max,% | mgKOH/g | mPa·S,25ºC | Max,mg/g | APHA | |||
DLR-2000 | 230-250 | ≤0.08 | ≤0.08 | 5-7 | 240 | ≤5Not detected | ≤50 | DLR-2000 is a typical low-odor, environmentally friendly memory resilience polyether. This product is mainly used to produce memory resilience soft foams such as mattresses, furniture, pillows, toys, etc. |
DLR-1030E | 310-318 | ≤0.08 | ≤0.08 | 5-7 | / | ≤5Not detected | ≤50 | DLR-1030E is a typical low-odor, environmentally friendly memory resilience polyether.This product is mainly used to produce memory resilience soft foams such as mattresses, furniture, pillows, toys, etc. |
DLR-308 | 300-315 | ≤0.08 | ≤0.08 | 5-7 | / | ≤5Not detected | ≤50 | DLR-308 is a typical low-odor, environmentally friendly memory resilience polyether.This product is mainly used to produce memory resilience soft foams such as mattresses, furniture, pillows, toys, etc. |
Flash point is above 200 degree centigrade (open cup method), flammable but non-explosive. In case of
fire, put out with foams, dry powder, steam or water.
When handling polyols, precautions should be taken to avoid exposure to the eye or prolong contact
with the skin. If eye contact occurs, flush with plenty of water. If skin contact occurs, wash exposed areas
thoroughly with soap and water.
STORAGE
It is slightly hygroscopic and may absorb water. Containers should be kept sealed and protected
from contamination of moisture and foreign materials.
Package:
Steel drum/IBC drum/Isotank
Shelf Life:
The shelf life is 6 months. After that, the pre-test should be made before use.




