Audited Supplier
LT-slope mesh
Installation Video
20years
Galvanized Iron Wire
Protecting Mesh
Diamond
Plain Weave
Galvanized
3mm, 4mm
Zn- Al Coated Steel Wire
8X14mm, etc
3m, 3.5m, etc
150kN/M
1770n/mm2
8X14mm
Slope Protection Net
Rockfall Protection Net
Rock Barrier Net
Rockfall Netting
Rockfall Net
Security Fence
Rockfall Barrier Mesh
longteng
in Roll, Put Into Container Directly
3x30m
China
7314140000
Product Description
Material: High carbon steel wire.
Surface treatment: Hot dipped galvanized, zinc-aluminum coated.
Zinc thickness: No less than 150 g/m2.
Wire diameter: 3 mm, 4 mm.
Mesh type: Rhomboid hole.
Mesh size : 65 mm inscribed circle diameter.
Tensile strength: Minimum 1770 MPa.
Braking load of single wire: 12.5 kN.
Mesh roll width: 1-3.5 m.
Mesh roll length:10-30 m.
Fitting : Steel anchor, claw type spike plate, soil or rock nails,clips, sewing rope, boundary rope. (The steel anchor is made
ofdeformed steel bar of 25 mm diameter)
High-tensile steel wire slope protection system rockfall netting meshComponents:
The system consists of four main components that are carefully coordinated with each other.
item | value |
Place of Origin | China |
Hebei | |
Material | Galvanized Steel Wire |
Type | Chain Link Mesh |
Application | Protecting Mesh |
Weave Style | Plain Weave |
Technique | woven |
Model Number | LT- Slope protection mesh |
Brand Name | Longteng Slope protection mesh |
Processing Service | Cutting |
Delivery Time | 8-14 days |
Material | Zn-Al Alloy steel wire |
Wire Tensile Strength | 1770N/mm2 |
Mesh tensile strength | 150KN/m |
Diagonal | 8x14mm |
Wire Diameter | 3mm |
Mesh Width | 65mm |
Steel wire mesh is made of high-tensile steel wire with an ultimate tensile strength of 1770 N/mm2.
2. Spike Plates
Rigid spike plates that are reinforced with ribbing ensure optimal load transmission from soil or rock anchors to the mesh.These plates are placed over the anchor heads and tightened to pre-tension the mesh onto the slope.The plates are galvanized and have dimensions of 13.0''*7.5"*0.4"(330mm*190mm*10mm).
3. Connection clips
The connection clips high-strength steel wire connection clips enable mesh sections to be joined without overlapping and still guarantee one hundred percent transfer of forces.These claw are hot dip galvanized and consist of 0.25"(6mm) thick steel spiral.
4. Soil or rock nails
Adapted to the local soil and rock static requirements, the mesh can be anchored in accordance with our dimensioning concept with commercial soil or rock nails.The main anchors of the system are installed in a grid typically from 6.6 to 16.4 ft (2.0 to 5.0m)horizontal and vertical spacing.Actual spacing depends upon the results of site analysis and modeling.Anchor consist of commercially available steel bars ranging from 1.0 to 1.25 ft (25 to 32mm).Selfdrilling grout injection anchors are also permitted.Additional anchors may also be used to provide added support at boundaries and in low points and hollows.
